Edifier W830NB Wireless Over-Ear Headphones
User Manual
1. Power ON/OFF
Press and hold the power button for 1 second to power on or off.
2. First Pairing
Once powered on, the headphones will automatically enter Bluetooth pairing mode. Select "EDIFIER W830NB" in your device settings to connect.
3. Pairing for New Device
In the ON state, press and hold the power button for approximately 3 seconds to enter Bluetooth pairing mode. Select "EDIFIER W830NB" in your device settings to connect. Note: For subsequent use, the headphones will automatically connect to the device used last time.
4. Dual-Device Connection
- Pair device A with the headphones successfully.
- Press and hold the power button for 3 seconds to re-enter Bluetooth pairing mode, and then select "EDIFIER W830NB" in device B settings to connect.
- Select "EDIFIER W830NB" again in device A settings to connect, and the dual-device connection is done.
Note: Dual-device connection is disabled by default. Enable this function via the EDIFIER ConneX app. For subsequent use, the headphones will automatically reconnect to the two devices used last time.
5. Charging
Input: 5V-1A. Connect the headphones to a power source via the USB-C cable for charging. Note: Ensure the USB port is completely dry before charging. When charging with a USB-C cable, the product is used as wired headphones and Bluetooth functions are unavailable.
6. Controls
- Call: Press once (x1).
- Music: Press once (x1) for play/pause, double press (x2) for next track, press and hold (-) for previous track.
- Mode: Press once (x1) to cycle through ANC modes (High Noise Cancellation / Ambient Sound / Noise Cancellation Off).
Note: Download the EDIFIER ConneX App for more customizable control settings.
7. Reset
In the ON state, press and hold the "+" and "-" buttons for 5 seconds to finish the reset. The headphones will then automatically enter Bluetooth pairing mode if successful.
8. Wired Listening
Connect to the headphones via the USB-C cable. Wired listening will automatically disable Bluetooth mode.