Valberg WF 1214 A W566C2 Washing Machine Product Information
Supplier: Valberg
Supplier Address: 1 Route de Vendeville F-59155 FACHES-THUMESNIL
Model Identifier: 10009854 / WF 1214 A W566C2
General Product Parameters
Parameter | Value | Parameter | Value |
---|---|---|---|
Rated capacity (kg)* | 12.0 | Dimensions in cm | |
Height | 85 | ||
Width | 60 | ||
Depth | 60 | ||
EEIw (Energy Efficiency Index)* | 52.0 | Energy efficiency class* | A |
Washing efficiency index* | 1.031 | Rinsing effectiveness (g/kg)* | 5.0 |
Energy consumption in kWh per cycle (ECO 40-60) | 0.544 | Water consumption in litre per cycle (ECO 40-60) | 57 |
Maximum temperature inside the treated textile (°C)* (Rated capacity) | 44 | Weighted remaining moisture content (%)* | 53.9 |
Maximum temperature inside the treated textile (°C)* (Half load) | 32 | Spin-drying efficiency class* | B |
Maximum temperature inside the treated textile (°C)* (Quarter load) | 22 | Type | Built-in / Free-standing |
Spin speed (rpm)* (Rated capacity) | 1350 | Airborne acoustical noise emission class (Spinning phase)* | C |
Spin speed (rpm)* (Half load) | 1350 | Standby mode (W) | / |
Spin speed (rpm)* (Quarter load) | 1350 | Networked standby (W) | / |
Programme duration (h:min)* (Rated capacity) | 4:00 | Minimum duration of the guarantee offered by the supplier | 24 months |
Programme duration (h:min)* (Half load) | 3:00 | Product designed to release silver ions during wash cycle | [Silver ion feature] |
Programme duration (h:min)* (Quarter load) | 3:00 | ||
Airborne acoustical noise emissions in the spinning phase (dB(A) re 1 pW)* | 80 | ||
Off-mode (W) | 0.50 | ||
Delay start (W) | 4.00 |
Additional information: https://www.electrodepot.fr/international-after-sales
* For the ECO 40-60 program
Technical Specifications
Parameter | Value | Parameter | Value |
---|---|---|---|
Rated supply (Voltage in V, nature of supply & frequency in Hz) | 1P+N 220-240 ~ 50 | Electric protection class | I |
Rated power in W | 2000 | Ingress protection code (IP) against solids particles and liquids | IPX4 |
Minimum inlet water pressure in MPa / Bars | 0.05 / 0.5 | Maximum inlet water pressure in MPa / Bars | 1 / 10 |
Manufacturing country | CN |