Valberg WF 714 A-10 S566C Washing Machine
Supplier: Valberg
Supplier Address: 1 Route de Vendeville F-59155 FACHES-THUMESNIL
Model Identifiers: 10007348, WF 714 A-10 S566C
Product Information Sheet according to EU regulation 2019/2014 and harmonized standards.
General Product Parameters
Dimensions
Parameter | Value |
---|---|
Height | 85 cm |
Width | 60 cm |
Depth | 48 cm |
Capacity and Efficiency
Parameter | Value |
---|---|
Rated capacity (kg) | 7.0 |
EEIw (Energy Efficiency Index) | 46.8 |
Washing efficiency index | 1.031 |
Energy efficiency class | A |
Rinsing effectiveness (g/kg) | 5.0 |
Energy and Water Consumption (ECO 40-60 Program)
Energy consumption per cycle: 0.403 kWh
Water consumption per cycle: 45 litres
Actual energy and water consumption may vary depending on usage conditions and water hardness.
Temperature and Moisture
Parameter | Value |
---|---|
Maximum temperature inside treated textile (°C) | 31 (Rated capacity) / 27 (Half load) / 24 (Quarter load) |
Weighted remaining moisture content (%) | 53.9 |
Spinning Performance
Parameter | Value |
---|---|
Spin speed (rpm) | 1351 (Rated capacity, Half load, Quarter load) |
Spin-drying efficiency class | B |
Programme Duration
Parameter | Value |
---|---|
Programme duration (h:min) | 3:28 (Rated capacity) / 2:42 (Half load) / 2:42 (Quarter load) |
Type | Built-in / Free-standing |
Noise Emissions (Spinning Phase)
Parameter | Value |
---|---|
Airborne acoustical noise emissions (dB(A) re 1 pW) | 72 |
Airborne acoustical noise emission class | A |
Power Consumption Modes
Parameter | Value |
---|---|
Off-mode (W) | 0.50 |
Standby mode (W) | - |
Delay start (W) | 4.00 |
Networked standby (W) | - |
Guarantee
Minimum duration of guarantee: 24 months
Special Feature
This product is designed to release silver ions during the washing cycle. ?
Technical Specifications
Parameter | Value |
---|---|
Rated supply (Voltage in V, nature of supply & frequency in Hz) | 1P+N 220-240V ~ 50Hz |
Rated power (W) | 1900 |
Electric protection class | I |
Ingress protection code (IP) | IPX4 |
Minimum inlet water pressure (MPa / Bars) | 0.05 / 0.5 |
Maximum inlet water pressure (MPa / Bars) | 1 / 10 |
Manufacturing country | CN |
Additional Information
For international after-sales service, please visit: https://www.electrodepot.fr/international-after-sales
Note: Information provided is for the ECO 40-60 program.