AROMASOUL V900S Essential Oil Diffuser User Manual

Overview

This document provides guidelines for using the AROMASOUL V900S Essential Oil Diffuser.

Key Components: Atomizing head, light/Bluetooth switch, timer, gear position indicator, charging plug, indicator lights.

Product Description: The AROMASOUL V900S is an essential oil diffuser designed for home use, featuring adjustable mist settings, ambient lighting, and Bluetooth connectivity via the 'fragrant-art' app.

Instructions for Use

Follow these steps to set up and use your diffuser:

1. Step 1: Rotate the atomizing head clockwise to remove it from the diffuser body.
2. Step 2: Pour essential oil into the atomization bottle. Note: Do not exceed the MAX line of the bottle's capacity.
3. Step 3: Tighten the atomizing bottle onto the atomizing head, then tighten the assembled atomizing head onto the diffuser. Connect the charging cable if needed.

Buttons and Indicators

• Switch Button: Click to power on/off. The switch indicator light turns on.
• Light/Bluetooth Button:
  • Light: Click to cycle through light colors.
  • Bluetooth: Long press for 3 seconds to enter/exit Bluetooth mode (indicator light turns purple).
• Gear Button: Click to switch between different mist intensity gears.
  • Gear I: Operates for 15s, pauses for 200s.
  • Gear II: Operates for 15s, pauses for 100s.
  • Gear III: Operates for 15s, pauses for 60s.
  • Gear IV: Operates for 30s, pauses for 30s.
• Timer Button: Click to set the automatic shutdown timer.
  • 1H: Shuts down after 1 hour.
  • 4H: Shuts down after 4 hours.
  • 8H: Shuts down after 8 hours.
  • 24H: Shuts down after 24 hours.

Troubleshooting

Why isn't the essential oil atomizing?

• Issue: Diffuser does not operate or only runs without atomizing essential oil.
  • Check: Low battery.
  • Solution: Connect the power cable to charge. (Indicator lights flash cyclically during charging; all four lights are solid when fully charged; low battery indicated by lights flashing three times before shutdown.)
• Issue: Device runs, but no mist or small mist.
  • Check: Using waterless aroma essential oils.
  • Solution: Add essential oils specifically designed for aroma diffusers. Avoid water or oils for humidifiers/spa treatments.
  • Check: Bottle, atomizing head, and body are not tightly screwed.
  • Solution: Ensure the atomization component is fully tightened to prevent air leaks.
  • Check: Outside working hours set by Bluetooth App (e.g., wrong day or time).
  • Solution: Create and save a new schedule in the app.
  • Check: Machine is blocked.
  • Solution: Refer to cleaning and maintenance steps for regular cleaning.
  • Check: Less than 5% essential oil in the bottle.
  • Solution: Add more essential oil.
• Issue: Fragrance is not strong enough.
  • Solution: Choose high-concentration waterless essential oil (recommended up to 85%).
  • Solution: Use the gear button or app to set a longer mist/work time.
  • Solution: Place the diffuser near the room's air intake.
  • Solution: Ensure at least 3 feet of clearance above the diffuser for optimal scent dispersion.

Caution and Maintenance

Safety Instructions

• Do not attempt to modify or repair the equipment yourself.
• Do not invert or tilt the device during use.
• If transporting the device, perform maintenance and cleaning first, then pack and transport it properly to prevent oil leakage.
• Prohibitions:
• ❌ Do not lay the machine flat or tilt it.
• ❌ Do not directly drip essential oils into the spray outlet.
• ❌ Prohibited to pour in other liquids.
• ❌ Do not mix fragrance oils with different ingredients to avoid chemical reactions that could damage the atomization core.

Maintenance

Inspect and maintain the device every six months, or when changing scents frequently or noticing weakened diffusion.

1. Pour an appropriate amount of alcohol into the atomizing bottle for cleaning.
2. After cleaning, pour a small amount of alcohol into the bottle again. Tighten the assembled bottle and head onto the diffuser.
3. Turn on the device and run for 5-8 minutes to allow alcohol to pass through the atomization system, cleaning the internal pipes.
4. After cleaning, unscrew the bottle and head. Place them in a well-ventilated area to dry naturally. This step is crucial as residual alcohol can affect subsequent essential oil use.

Recommendation: AROMASOUL fragrance essential oils are recommended for optimal performance.

Bluetooth App Control (fragrant-art)

Control your diffuser wirelessly using the 'fragrant-art' mobile application.

Setup:

1. Ensure Bluetooth is enabled on your phone.
2. Download the 'fragrant-art' app from the App Store or by scanning the QR code on the diffuser.
3. Power on the diffuser and long-press the Light/Bluetooth button (3-5 seconds) until the indicator light turns purple to enter Bluetooth mode.
4. Open the 'fragrant-art' app. Click the search icon to find and connect to your diffuser.

App Features:

• Operation Time: Set mist duration (15-180 seconds).
• Pause Time: Set pause duration between mist cycles (15-180 seconds).
• Timing: Set automatic shutdown timers (1h, 4h, 8h, 24h).
• Schedule: Create custom operating schedules for specific days and times.
• Light Settings: Control ambient light color and effects (e.g., breathing light).
• Device Naming: Assign custom names to multiple diffusers for easy identification.

Note: The app allows fine-tuning of atomization frequency to control fragrance concentration. You can also use preset shortcuts for quick settings.

Feedback: Suggestions or feedback can be sent to servicefenfen@163.com.

Parameters

FCC Compliance

FCC ID: 2BLZ8-V900S

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and your body.