UGREEN LP369 Phone Mount
User Manual
Product Overview
Phone Mount (Front View)
- Arm
- Bracket
- Spring-loaded stick
Phone Mount (Rear View)
- Nut
- Socket
Arc-shaped Base
- Ball joint
- Supporting stick
- Arc-shaped clip
- Rubber mat
Specifications
| Material: | (PA+GF) + (PC+ABS) |
|---|---|
| Dimension: | ≈L85 x W12.45 x H97.61 (mm) |
| Compatibility: | Suitable for 4.7″ – 7.2" smartphones |
Installation
- Release the nut.
- Attach the nut to the ball joint, insert the ball joint into the socket, then tighten the nut.
- Secure the arc-shaped base in the dashboard and push in all the way.
Instructions
- Place your smartphone on the bottom bracket.
- Hold your smartphone and push the bottom spring-loaded stick up until your phone is tightened.
- Move the supporting stick up and down and rotate the phone mount to a desired angle.
- To remove your phone, hold your phone and push the bottom spring-loaded stick up again.
Applicable Dashboard
Notices
- Do not use highly hazardous chemicals, detergent or strong cleaner to clean the product.
- When not in use, please store the product in a dry, dust-free place with ambient temperature.
- For the purpose of disassembly, please ask UGREEN after-services or such other service providers designated by UGREEN.
- Keep out of reach of children.
Package Contents
- 1 x Phone Mount
- 1 x Arc-shaped Base
- 1 x User Manual
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
Conditions for voiding warranty:
- Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
- Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
- Natural wear and aging of consumables or components during use (such as batteries, etc.).
- Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
- If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.
EU Declaration of Conformity
This product meets all the basic requirements of the applicable EU Directives for safe use, including the requirements for the content of hazardous substances in the product.
CE
WEEE
This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE - 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.
[WEEE symbol - crossed-out wheelie bin]
