Ugreen 1.5m Selfie Stick Tripod Instructions
Model: LP586
Product Overview
This document provides instructions for the Ugreen 1.5m Selfie Stick Tripod (Outdoor Version).
Operating Instructions
1. Bluetooth Pairing
Action: Long press the remote control's power button for 3 seconds until the green light flashes to enter Bluetooth pairing mode (?).
Action: Turn on your phone's Bluetooth (?) and search for devices.
Action: Select "Dispho" from the list of available devices. The green light on the remote control will turn off upon successful connection.
Visual Description: The diagram shows a phone screen with Bluetooth settings and the "Dispho" device listed as available.
2. Use Tripod
Action: Unfold the tripod legs (⛰️) from the bottom of the device.
Action: Place the tripod on a steady horizontal surface.
Visual Description: The diagram illustrates unfolding the tripod legs and placing it on a flat surface.
3. Fix the Phone
Action: Rotate the phone holder (?) to open it.
Action: Securely place your phone within the holder. The holder can be rotated 360° for optimal positioning.
Visual Description: The diagram shows opening the phone holder and placing a phone inside, with an arrow indicating 360° rotation.
4. Universal Cold Shoe Port (Optional)
This port can be used to attach accessories such as microphones or LED lights for expanded functionality, such as live broadcasting.
Visual Description: The diagram shows a cold shoe mount on the selfie stick, with an icon representing a microphone or light.
5. Replace Accessories
Action: Remove the existing bracket or screw rod (?).
Action: Install the desired accessory using screw installation.
Visual Description: The diagram shows a screw being detached and then reattached, illustrating the process of swapping accessories.
6. Universal 1/4 British Screw Rod
This screw rod (?) allows for the attachment of compatible accessories, enhancing the multi-functional usage scenarios.
Visual Description: The diagram shows a 1/4 inch screw thread, indicating compatibility with standard camera mounts.
Remote Control Battery Replacement
Action: Remove the rear cover of the remote control.
Action: Replace the button battery (CR1632) (?).
Note: On first use, remove the rear cover and take out the insulator from the battery chamber.
Visual Description: The diagram shows the back of the remote, indicating how to open it and replace the battery.
Warnings ⚠️
- Watch your hands during use.
- The product is not designed for children under 14 years old. Do not swallow it.
- Do not dismantle or modify the product.
- Do not store the product in a humid environment.
- Keep the product away from heat sources.
- Do not expose the product to water or other liquids in case of damage.
FCC Statement ?
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
ISED Statement ?
English: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES - 3 (B)/NMB - 3(B).
French: Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. L'appareil numérique est conforme à CAN CAN ICES-3 (B) / NMB-3 (B).
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
cet appareil est conforme à l'exemption des limites d'évaluation courante dans la section 2.5 du cnr - 102 et conformité avec rss 102 de l'exposition aux rf, les utilisateurs peuvent obtenir des données canadiennes sur l'exposition aux champs rf et la conformité.
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.
Cet équipement est conforme aux limites d'exposition aux rayonnements du Canada établies pour un environnement non contrôlé.
RF Exposure Statement: The device has been evaluated to meet general RF exposure requirement. The device can be used installed and operated with minimum distance 0mm between the radiator and your body.
L'appareil a été évalué pour répondre aux exigences générales d'exposition aux RF. Cet équipement doit être installé et utilisé avec une distance minimale de 0 mm entre le radiateur et votre corps.
