Product Overview
This document provides instructions and specifications for the Xlite wireless gaming mouse.
An outline drawing of the Xlite wireless gaming mouse, showcasing its ergonomic shape with a perforated design on the sides and palm rest for ventilation and grip.
Function Layout
A diagram illustrating the button layout of the Xlite wireless gaming mouse. It shows a top view with numbered buttons: 1 (Left click), 2 (Right click), 3 (Middle click), 4 (Forward), 5 (Backward), 6 (Scroll up), 7 (Scroll down). A side view shows 8 (Power off), 9 (Power On), 10 (Wired and charging Type-C), and 11 (Indicator).
- 1 Left click
- 2 Right click
- 3 Middle click
- 4 Forward
- 5 Backward
- 6 Scroll up
- 7 Scroll down
- 8 Power off
- 9 Power On
- 10 Wired and charging Type-C
- 11 Indicator
Instruction
Mouse Setup
- Take out the wireless USB Nano receiver from the package.
- Plug the receiver into your computer USB port.
- Turn on the mouse power by switching the power switch on the bottom of the mouse.
- Wait for computer installation to finish.
DPI Setting and Indication
DPI Levels: 400, 800 (default), 1600, 3200 DPI.
To change DPI circularly, hold down buttons 1 (Left Click) + 3 (Middle Click) + 4 (Forward) for 3 seconds.
DPI Indicator Color:
- 400 DPI: Cyan color breath.
- 800 DPI (default): Blue color breath.
- 1600 DPI: Purple color breath.
- 3200 DPI: White color breath.
Notes on DPI:
- DPI can be set via software; the maximum DPI is 20000.
- DPI LED effects can be customized and turned off via software to save power.
Polling Rate
Polling rate can be set via software to 125, 250, 500, or 1000Hz. The default polling rate is 1000Hz.
Wired and Wireless Function
- The mouse automatically switches between wired and wireless modes. When the receiver is plugged into the computer without the cable connected, it operates in wireless mode.
- When the USB cable connects the computer to the mouse, it automatically switches to wired mode.
Low Power and Charging Indication
- Low Power: When the mouse battery power is low (less than 3.5V), the Red color in the scroll wheel will flash, indicating the need for charging.
- Charging: During charging, the yellow LED in the scroll wheel will flash. Once the battery is fully charged, the LED color will turn green, and charging will stop automatically. The scroll wheel LED will then revert to DPI indication.
Pairing
If your mouse loses connection, you can re-pair it using the following process:
- Hold down the Left Click, Middle Click, and Right Click buttons simultaneously for 3 seconds until the yellow color flashes in the scroll wheel.
- Release all buttons. Place the mouse close to the receiver and re-plug the receiver. The LED will stop flashing once pairing is complete.
Note: For function customization, please download the software from the website.
Main Specifications
| Size | 120x63.5x39mm |
|---|---|
| Weight | 73g |
| Switch | Omron 20M(OF) |
| Sensor | PAW3370 |
| Max DPI | 20000 |
| Default DPI | 400-800-1600-3200DPI |
| IPS | 400ips |
| Acceleration | 50g(Max) |
| Polling Rate | 125-250-500(default)-1000Hz |
| Interface | USB 2.0 |
| Battery Type | Li-ion Polymer Battery |
| Battery Capacity | 300mAh |
CAUTION
⚠️
- Keep the battery dry.
- Avoid locating the battery terminals near metallic objects.
- Do not short-circuit and avoid metallic or water coming into the mouse to cause battery short.
- Use computer USB and the specified cable to charge the mouse.
