Sigma Nugget II Flash Rear Light
Mounting
Step 1: Attach the light to the mounting strap.
Step 2: Secure the strap to the bicycle's seatpost.
Note: The light distribution must not be covered!
Alignment
The final side of the tail lamp should be perpendicular to the roadway and at right angles to the vehicle center axis.
Alignment angles: 90°, 17°, 90°.
Visual representation shows the light positioned relative to the vehicle center axis.
Operation Modes
ON/OFF:
- 1 x click = Standard mode
- + 1 x click = High power mode
- + 1 x click = High power flashing mode
- + 1 x click = OFF
Battery Status & Charging
Battery Status:
- 30% charge
- 70% charge
Charging Alert: If the LED indicator lights up, please charge the battery immediately.
Charging Process:
- Use a Micro USB cable.
- Power input: 5V / 500-1000 mA.
- Charging time: Approximately 2 hours.
- Completion: Both indicators will go out after charging is complete.
Important: Please always ensure the silicone plug is securely closed after charging.
Accessories
- Art.-Nr. 18552: Charger + Charging Cable Micro-USB
- Art.-Nr. 18553: Charging Cable Micro-USB
Manufacturer Information
SIGMA-ELEKTRO GmbH
Dr.-Julius-Leber-Straße 15
D-67433 Neustadt/Weinstraße
SIGMA SPORT USA
1860B Dean St.
St. Charles, IL 60174, U.S.A.
SIGMA SPORT ASIA
4F, No.192, Zhonggong 2nd Rd.,
Xitun Dist., Taichung City 407, Taiwan