LED Car Emergency Light V16 Flashlight

Product Overview

The V16 Flashlight is a rechargeable LED beacon designed for emergency situations on the road. It features a powerful magnetic induction strobe and a bright LED light to enhance visibility and signal for help during accidents or breakdowns. Its compact and durable design makes it a reliable safety accessory for any vehicle.

Key Features:

• High-intensity LED strobe for maximum visibility
• Magnetic base for secure attachment to vehicle surfaces
• Rechargeable battery for long-lasting use
• Multiple lighting modes (strobe, steady, flashlight)
• Durable, weather-resistant construction
• Easy one-button operation

Operation Instructions

Powering On/Off: Press and hold the power button for 2 seconds to turn the device on or off.

Changing Modes: Briefly press the power button to cycle through the available lighting modes:

• Mode 1: Strobe (high frequency)
• Mode 2: Steady Light
• Mode 3: Flashlight (focused beam)

Magnetic Mounting: Place the flashlight on a clean, flat, metallic surface on your vehicle. The strong magnetic base ensures it stays securely in place, even in windy conditions.

Charging the Device

The V16 Flashlight is equipped with a rechargeable battery. To charge:

1. Connect the provided USB cable to the charging port on the device.
2. Connect the other end of the USB cable to a standard USB power source (e.g., car charger, power bank, computer USB port).
3. The charging indicator light will illuminate. It will turn off or change color when charging is complete.

Note: Fully charge the device before first use.

Safety Precautions

To ensure safe and effective use of the V16 Flashlight:

• Always keep the device charged and readily accessible in your vehicle.
• Use the strobe function responsibly to alert other drivers. Avoid prolonged use in areas where it might cause distraction.
• Do not look directly into the LED light when it is on, as it can be very bright.
• Keep the device away from extreme temperatures and direct sunlight for extended periods.
• This device is intended for emergency roadside use. It is not a substitute for proper vehicle maintenance or safe driving practices.
• Ensure the magnetic base is clean and free of debris for optimal adhesion.
• Dispose of the device or its battery according to local regulations.

Specifications

Troubleshooting

Device does not turn on: Ensure the device is fully charged. Check the USB cable and power source.

Light is dim: The battery may be low. Charge the device.

Magnetic base not holding: Ensure the mounting surface is clean, dry, and metallic. Remove any dirt or debris from the base.

Contact & Support

For further assistance or inquiries regarding the Universal LED Car Emergency Light V16 Flashlight, please refer to the manufacturer's official channels or your point of purchase.