Installation Instructions of Milano Wall Lamp
Diagram Overview
The installation diagram illustrates the components and steps involved. It shows a wall on the left. Key elements are labeled:
- 01: Mounting plate
- 02: Screws and plastic anchors for wall mounting
- 03: Electrical terminal block with terminals labeled 'N' (Neutral) and 'L' (Live)
- 04: Screws for attaching the lamp body
- 05: Light bulb socket
- 06: Main lamp body
Installation Steps
- Use the mounting plate to mark the hole spacing. Drill the holes and insert the plastic anchors securely into the wall.
- Attach the mounting plate to the ceiling using the self-tapping screws.
- Locate the lamp body and connect the power wires. For waterproof models, be sure to wrap the power wires with waterproof electrical tape.
- Hand-tighten the nut to lock the ceiling plate onto the mounting plate.
- Insert the light source and test the power.
- Install the glass shade and tighten the screws to secure it. Do not over-tighten the screws to avoid cracking the glass. For waterproof models, be sure to install the waterproof rubber ring with the glass shade. Switch on the light to check the effect; installation is complete.
