Elega Light Rattan Arch Pendant Lamp Installation Guide
Step 1: Prepare the Ceiling Mount
Drill the required number of holes into the ceiling at the desired location. Insert expansion screws or appropriate anchors into these holes to provide a secure mounting point.
[Diagram: Shows a drill bit creating holes in a ceiling surface. Expansion screws are depicted being inserted into these holes.]
Step 2: Install the Hanging Plate
Attach the provided hanging plate or mounting bracket to the ceiling, securing it firmly over the expansion screws or anchors. Ensure it is level and stable.
[Diagram: Illustrates a mounting plate being affixed to the ceiling using screws, with an upward arrow indicating the direction of attachment.]
Step 3: Connect Wiring and Mount Lamp Body
Carefully connect the electrical wires from the ceiling fixture to the corresponding wires of the lamp body (typically live, neutral, and ground). Once the wiring is complete and secured, mount the lamp body onto the installed hanging plate. Ensure it is securely fastened.
[Diagram: Depicts electrical wires being connected using wire connectors. The lamp body is then shown being attached to the hanging plate.]
Step 4: Install Bulb and Lampshade
Screw the appropriate light bulb into the socket. Attach the lampshade to the lamp body according to its design, ensuring it is securely in place.
[Diagram: Shows a light bulb being screwed into a lamp socket and a lampshade being positioned and secured onto the lamp fixture.]
For more information, visit www.elegalight.com.
elegalight - Elegant Modern Lighting
