Smart Bright Solar All-in-One Street Light

Mounting Instruction

Specifications

Type Number	Flux(Im)	Battery parameter	PV parameter	CCT	Ta
BRP110 LED50/757G2	5000lm	LiFeO4/60Ah/3.2V	35W/12V	5700K	0-50°C
BRP110 LED85/757G2	8500lm	LiFeO4/54Ah/6.4V	55W/14V	5700K	0-50°C
BRP110 LED120/757G2	12000lm	LiFeO4/72Ah/6.4V	80W/13V	5700K	0-50°C
BRP110LED180/757G2	18000lm	LiFeO4/30Ah/25.6V	125W/34.5V	5700K	0-50°C

Certifications: IP65, CLASS III, RoHS

Factory Default Lighting Mode

Work time	Motion detected	Not detected
2h	100%	30%
3h	60%	20%
6h	30%	10%
1h	50%	30%

Visual representation of lighting modes: A diagram shows two figures. The left figure, labeled 'Not detected', depicts a person with a low-intensity light cone. The right figure, labeled 'Motion detected', shows a person with a high-intensity light cone.

Dimensions

TYPE	W(mm)	L(mm)	H(mm)
5000lm	363	562	85
8500lm	363	842	85
12000lm	363	1142	85
18000lm	525	1321	161

Components

1. Solar panel: Converts solar energy into electricity.
2. LED source: Luminous component.
3. Microwave sensor: Detects object movement.
4. Light arm: Fixes the solar panel.
5. Screws (M6x16mm): Used to fix the light arm.
6. Safety rope: Prevents lamps from falling.

Installation

Note: The luminaire is in sleep mode as a factory default setting. It will wake up automatically after 10 seconds of charge under sunlight.

Installation Steps

Step 1: Lamp arm installation. (Skip this step for the 18000lm model).
Step 2: Adjust PV tilt angle. Unscrew the screws, adjust the angle, then screw the screws back in.
Step 3a: Adjust LED light Angle. For 5000lm, 8500lm, 12000lm models.
Step 3b: Adjust LED light angle (±8°). For the 18000lm model.
Step 4: Install on pole. Mount the unit onto a pole with a diameter of Ø60~Ø70mm. Torque specifications are provided for securing the unit.
Step 5a: Installation with safety rope. For 5000lm, 8500lm, 12000lm models.
Step 5b: Installation with safety rope. For the 18000lm model.

Application Notes

Solar panel orientation: In the Northern Hemisphere, the solar panel should face south. In the Southern Hemisphere, it should face north.
Installation location: Choose a sunny place that is not shaded by trees, buildings, walls, etc., to ensure the solar panel receives maximum sunlight for charging the battery.
Temperature specifications: Product storage temperature: -10-60°C; Charge temperature: 0-45°C; Discharge temperature: -10-60°C.
Weather resistance: This product can withstand a Class 14 typhoon. Storms above Class 14 may damage the product.
Storage duration: The products can be stored for up to 6 months. If storage exceeds 6 months, it is recommended to re-charge the product in bright daylight.

Sensor Indicator Light Status Description

Indicator Light	Indicator Light Status	Remote Control System Status
On	Normal working	Discharge
Red (Flash slowly)	Charging	Charging
Red (Flash fastly)	System failure	Short circuit/open circuit/over discharge / EBMS over temperature

	Philips SmartBright All-in-one Solar Street Light: Features, Specifications, and Applications Discover the Philips SmartBright All-in-one Solar Street Light, a versatile lighting solution offering up to 18000 Lumens with off-grid and hybrid options. This document details its features, technical specifications, applications, and dimensional drawings.
	Philips SunCrest All-in-one Solar Post Top - High Efficacy Outdoor Lighting Explore the Philips SunCrest All-in-one Solar Post Top, offering a power range from 10W to 30W with high efficacy up to 190 lm/W. Features include durable aluminum housing, UV-stabilized paint, microwave motion sensor, and IP65/IK08 rating for various outdoor lighting applications.
	Philips SunStay Pro VGP725 LED Street Light - Technical Specifications and Features Detailed information on the Philips SunStay Pro VGP725 LED street light, including its technical specifications, features, and benefits for sustainable urban lighting.
	Philips Iridium gen4 LED Street Light BGP501/502 - Technical Specifications and Installation Guide Comprehensive guide to the Philips Iridium gen4 LED street light (BGP501/502), detailing technical specifications, dimensions, installation procedures, wiring diagrams, compatibility information, and safety guidelines.
	Philips Iridium gen4 LED Street Lighting Discover the Philips Iridium gen4, a leading LED street lighting solution offering enhanced visual comfort and tool-free maintenance. Learn about its features, applications, and technical specifications.
	Philips BRP130/131/132 LED Luminaire Mounting Instructions & Specifications Comprehensive mounting instructions, technical specifications, and safety guidelines for Philips BRP130, BRP131, and BRP132 LED outdoor luminaires. Includes installation steps, maintenance, and warnings.
	Philips Jargeau LED gen3: Historic Design Meets Modern Lighting Technology Discover the Philips Jargeau LED gen3, a luminaire that blends the iconic design of 19th-century street lamps with advanced 21st-century LED technology. Ideal for urban centers, historic areas, and public spaces, it offers energy efficiency, high-performance optics, and future-proof connectivity with Philips SR (System Ready) sockets and Interact City software.
	Philips TownGuide Performer: Public Lighting Luminaire Product Guide Explore the Philips TownGuide Performer, a versatile and energy-efficient LED luminaire family for urban public lighting. Discover its various shapes, lighting performance, application examples, smart control options, and technical specifications for creating vibrant and sustainable city environments.