EMS Dental Device Reprocessing Instructions

About This Guide

This document provides essential reprocessing instructions for EMS dental devices, including AIRFLOW MAX, PERIOFLOW, and PIEZON LED handpieces. It is crucial to follow these guidelines carefully to ensure the safe and effective use of your EMS equipment.

Key Reprocessing Steps

The reprocessing of EMS dental instruments involves several critical stages:

1. Preparation: Immediate post-treatment rinsing and cleaning of the instrument lumens.
2. Cleaning and Disinfection: Utilizing validated cleaning solutions and procedures, either automated or manual, to remove contaminants.
3. Drying: Ensuring all parts are thoroughly dry before proceeding to the next step.
4. Inspection: Visually checking for any remaining stains or damage.
5. Packaging: Properly packaging the sterilized products in FDA-cleared sterilization pouches.
6. Sterilization: Performing sterilization using approved methods, such as prevacuum steam sterilization, adhering to specific temperature and time parameters.
7. Storage: Storing sterilized products in a clean, dry, and dust-free environment.

For detailed procedures and specific product disassembly, please refer to the relevant sections within this document.

Important Safety Information

Always pay close attention to safety precautions outlined in this manual. Ensure that all reprocessing steps are performed in accordance with local regulations and hygiene standards. For any discrepancies or unclear information, it is recommended to consult EMS directly.

Product Compatibility

EMS devices are designed and tested for exclusive use with EMS prophylaxis powders and instruments. Using non-EMS compatible products may lead to device damage and void the product warranty.