User Manual for Cresdo models including: HS-1035 Hand Truck, HS-1035, Hand Truck, Truck
A The First Step 1 The screw according to the line direction to go through the hole and lock with toe plate and connection. PS: The screw can't be locked too tightenly. The Second Step M8x55 4 2 The Fourth Step 5 1a M8x45 HS-1035 Assembly Instructions Read instructions thoroughly before proceeding. Tighten all parts by hands. Don't use power tool. For you safely, please do not coverload . For pneumatic wheel: Please check air pressure in tires. Maintain (30) PSI. Before inserting the handle insert the handle and locking screw. The Third Step washer wheel pin 3 Must lock the connection on the upper first hole on the truck body. 1 Please follow direction for assemble. nose plate axle axle boxes the axle should go throuth the axle boxes then, the axle boxes throuth be combird with hand truck body Firstly, insert the first washer into the axle. Secondly, insert wheel. Thirdly, insert the second washer, and finally insert the pin into the axle. Please bend the cotter pin. 2015.09.03 Lisa3-Heights™ PDF Toolbox API 6.12.0.6 (http://www -tools.com)