FITUEYES FT65 Floor TV Stand Installation Manual

Product Information

Brand: FITUEYES

Model: FT65

Model Numbers: F08P1441L, S02P1442P, S02P1443B

Product Type: Floor TV Stand

What's in the Box

Main Components

• TV Backplate (Part 1) - 1 pc
• Base Pieces (Part 2) - 2 pcs
• Support Poles (Part 3) - 2 pcs
• Tripod Legs (Part 4) - 1 pc

Hardware & Accessories

• Screws (A) - 4 pcs
• Screw (B) - 1 pc
• Screw (C) - 1 pc
• Screws (D) - 2 pcs
• Screw (E) - 1 pc
• Screw (F) - 1 pc
• Screw (G) - 1 pc
• Screw (H) - 1 pc

TV Installation Accessories

• M-A (M5x14) - 4 pcs
• M-B (M6x14) - 4 pcs
• M-C (M6x30) - 4 pcs
• M-D (M5x10) - 4 pcs
• M-E (M8x30) - 4 pcs
• M-F (M8x50) - 4 pcs
• M-G (Ø5x15x1) - 8 pcs
• M-H (ST4.8x38) - 8 pcs

Assembly Instructions

Step 1: Assemble Base

Attach the TV backplate (Part 1) to the two base pieces (Part 2). Secure using screws (A x4) and screws (3 x2).

Step 2: Attach Tripod Legs to Base

Connect the two tripod leg sections (Part 4-A, 4-B) to the base assembly. Secure with screws (7 x2).

Step 3: Attach Support Poles to Base

Fix the support poles (Part 3) to the base assembly using screws (5 x2).

Step 4: Mount Main Tripod Leg

Attach the main tripod leg assembly (Part 4) to the base assembly. Secure with screws (5 x2).

Step 5: Attach Second Tripod Leg Section

Connect the second tripod leg section (Part 4-B) to the base assembly using screws (5 x2).

Step 6: Attach Second Set of Support Poles

Fix the second set of support poles (Part 3) to the base assembly using screws (5 x2).

Step 7: Mount TV Backplate to Stand Structure

Mount the TV backplate (Part 1) onto the assembled stand structure. Use screws (A x3) for this connection.

Step 8: Secure Support Poles to Backplate

Secure the support poles (Part 3) to the TV backplate. Use screws (6 x2) and screws (7 x2).

Step 9: Attach Bracket to TV

Attach the TV mounting bracket to the back of your TV. Select appropriate screws from M-A to M-G. Use Method A1 (without washers) for flat TV backs, or Method A2 (with washers M-H to M-J) for uneven backs. Washers can be stacked if needed.

Step 10: Adjust TV Height

Use a 6mm Allen wrench ⚙️ to adjust the TV backplane to the desired height on the stand. Ensure adequate space is maintained between the bottom of the TV and the bracket to prevent damage.

Step 11: Mount TV onto Stand

Carefully mount the TV, with the bracket attached, onto the main stand structure.

Step 12: Final Positioning and Tightening

Position the TV correctly on the stand. Perform final adjustments and tighten all connections securely using the 6mm Allen wrench ⚙️.

Step 13: Final Check

Confirm all parts are securely fastened and the TV is stable on the stand.