AOSU 2K Wi-Fi Security Camera

AOSU Care

Thank you for choosing AOSU security products. AOSU prioritizes its customers.

Before using this product, please note:

1. Micro SD Card: If you do not have a Micro SD Card, please contact AOSU directly. It is recommended to format the Micro SD Card after inserting it.
2. Select installation location: Use your mobile phone to test the Wi-Fi signal coverage at the planned installation position before installation to ensure the product receives a better signal.

For tutorial videos on product usage, including app setup, installation, and formatting the Micro SD card, visit: aosulife.com.

Join "AOSU Care" for one-on-one live chat and phone service tech support to resolve any issues.

www.aosulife.com | [Facebook] @aosulife | [Email] support@aosulife.com

Product Overview

The AOSU 2K Wi-Fi Security Camera (P1 Lite) is a smart home security device.

Key Components:

• Antenna: For Wi-Fi connectivity.
• Microphone: For audio capture.
• Spotlights: Integrated lighting for enhanced visibility.
• Lens: Captures video footage.
• Infrared LEDs: Enable night vision.
• Status LED: Indicates the camera's operational status.
• Base bracket: For mounting the camera.
• Reset button: Used to reset the device.
• Micro SD Card Slot: For local storage.
• Speaker: For two-way audio or alerts.

Diagram Description: The camera is depicted with its antennas, lens, spotlights, IR LEDs, and status LED visible. The base bracket allows for adjustable positioning. A close-up view shows the reset button and Micro SD Card slot.

CAUTION: Please insert the Micro SD Card according to the direction shown in the diagram. Incorrect insertion may jam the card and damage the device.

SD Card Port: Supports Micro SD Cards for local storage (Max 512GB).

Reset button: Press and hold the button for 3 seconds to prepare the device for connection.

Card capacity requirements: 8-512GB.

Read and write speed requirements: Class 10 level.

File format: FAT32.

Setting Up the System

Download the AOSU App from the App Store (for iOS devices) or Google Play (for Android devices).

App Store: Available on the App Store

Google Play: Android App on Google Play

After downloading the app, sign up for an AOSU App account and follow the on-screen instructions to complete the setup.

Diagram Description: A smartphone screen displays the AOSU app interface, indicating a successful connection. The camera is shown mounted with its antennas extended.

Mounting the Camera

Find a Good Mounting Spot

To find an optimal spot for your Security Cam P1 Lite, test the wireless signal strength.

1. Open the AOSU App and navigate to Camera Settings > Mounting Guide.
2. Take your camera and phone to the desired mounting location to test the wireless signal strength.
3. Position the camera as close to your Wi-Fi Router as possible to ensure a better signal.

Select Height and Location

Hang the AOSUCam 7-10 feet (78-118 inches) above the ground. This height maximizes the detection range of the motion sensor. Avoid placing the AOSUCam under direct sunlight.

Make sure of the reserving wire length

Reserve approximately 15cm of the end wire. Secure the bottom base to prevent wire damage when the camera is turned or adjusted.

Diagram Description: The camera is shown mounted, with a measurement line indicating 15cm of wire length reserved from the base bracket, secured by a wire rod.

Test the Wi-Fi signal at installation position

Before installing the camera, use your cell phone to test the Wi-Fi signal quality at the intended installation position. Ensure your Wi-Fi router can provide a good Wi-Fi signal.

Installation

Follow these steps for installation:

1. Drill holes according to the position sticker. Use a drill bit size of 15/64" (6 mm).
2. Insert the wall anchors into the drilled holes.
3. Tighten the screws to secure the camera mount.

What is required:

• Power Drill (not provided)
• 15/64" (6mm) Drill Bit

Diagram Description: The diagram shows the camera being mounted to a wall. A sticker marks the drilling position. Wall anchors are inserted into the wall, and screws are used to attach the camera's base bracket. The required tools, a power drill and drill bit, are illustrated.

Notice

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• (1) Reorient or relocate the receiving antenna.
• (2) Increase the separation between the equipment and receiver.
• (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• (4) Consult the dealer or an experienced radio/TV technician for help.

FCC Radio Frequency Exposure Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure conditions. The minimum separation distance is 20cm.

Declaration of Conformity

CE: This product complies with the radio interference requirements of the European Community.

Aosu hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the website: https://www.aosulife.com.

This product can be used across EU member states.

Do not use the Device in environments with excessively high or low temperatures. Never expose the Device to strong sunshine or excessively wet conditions.

The suitable temperature for the OutdoorCam and accessories is -20°C to 50°C.

RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirements, use the product maintaining a 20cm distance between the device and human body.

For OutdoorCam: Wi-Fi Operating Frequency Range: 2412~2472MHz; Wifi Max Output Power: 17.13dBm(EIRP).

This product is designed and manufactured with high-quality materials and components, which can be recycled and reused. [Recycle] ♻️

This symbol [Waste Bin] ?️ means the product must not be discarded as household waste and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling help protect natural resources, human health, and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

Customer Service

Warranty

This product comes with a 12-month limited warranty. The actual warranty period will be implemented according to the requirements of local laws and regulations.

Email Us

Customer Support: support@aosulife.com

Call Us

[Facebook] @aosulife

[Twitter] @aosulife

[YouTube] @aosulife