BRUNBÅGE LED Desk Lamp
User Manual and Safety Information
Important Safety Instructions
[Warning] For indoor use only.
Regularly inspect the power cord, transformer, and all other parts for damage. Do not use the product if any part is damaged. Keep these instructions for future reference.
CAUTION: The light source uses non-changeable light diodes (LED). Do not disassemble the product, as the LEDs can cause eye damage. Do not immerse the lamp in water.
Cleaning: Use a damp cloth; never use strong cleaning agents.
WARNING: Deviation from the assembly instructions may result in a risk of fire or electric shock.
FCC Compliance Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
SAVE THESE INSTRUCTIONS
Operating Instructions
If you encounter issues during setup or operation, please contact IKEA for assistance. [Diagram shows a person looking confusedly at assembly parts and instructions, then making a phone call to IKEA, suggesting potential need for support.]
Step 1: Power Connection
Connect the provided USB power cable to the device's power port. [Diagram shows a USB cable being plugged into the device.]
Step 2: Turning On/Off and Brightness Adjustment
Press the power button on the base of the lamp to turn it on or off. [Diagram shows a finger pressing the button on the lamp base, with an icon indicating light on/off.]
To adjust the brightness, press the button briefly (approximately 0.5 seconds) multiple times. Four levels of brightness are available.
- 1 press: Brightness Level 1
- 2 presses: Brightness Level 2
- 3 presses: Brightness Level 3
- 4 presses: Brightness Level 4
A long press of the button (approximately 1.5 seconds) will turn the lamp off.
Step 3: Color Temperature Adjustment
Press and hold the power button (approximately 0.5 seconds) to change the color temperature, cycling through 2700K (warm white), 3500K, 4000K, and 5000K (cool white). [Diagram shows a finger pressing the button, with temperature indicators and arrows indicating adjustment.]
The flexible lamp head can also be adjusted to direct light as needed. [Diagram shows the lamp head being moved.]
