IKEA TERTIAL Work Lamp Assembly Instructions
Model Number: AA-2335213-2
Important Safety Instructions
English: This product has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully inserted. Do not attempt to defeat the safety purpose of the polarized attachment plug. Do not alter the plug.
CAUTION: TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
English WARNING: Deviation from the assembly instructions may result in a risk of fire or electric shock.
Français: Ce produit est muni d'une fiche polarisée (une lame est plus large que l'autre). Pour des raisons de sécurité, cette fiche ne s'insère que d'une seule façon dans la prise polarisée. Si la fiche ne s'insère pas complètement dans la prise, inverser la fiche. Si vous n'arrivez toujours pas à insérer la fiche dans la prise, consultez un électricien qualifié. Ne jamais utiliser un fil de rallonge à moins que la fiche ne puisse être insérée complètement. Ne jamais tenter de déjouer le dispositif de sécurité de la fiche. Ne jamais modifier la fiche.
AVERTISSEMENT: POUR EVITER TOUT RISQUE DE CHOC ELECTRIQUE, INTRODUIRE LA FICHE LARGE DANS LA FENTE LARGE DE LA PRISE DE COURANT EN S'ASSURANT QU'ELLE S'INSERE COMPLETEMENT.
Français ATTENTION: Tout écart par rapport aux instructions d'assemblage peut entraîner un risque d'incendie ou de choc électrique.
Español: Este producto tiene un enchufe polarizado (una patilla es más ancha que la otra) para reducir el riesgo de calambres. Este enchufe sólo se podrá enchufar de una forma. Si el enchufe no se puede introducir completamente en la toma, gíralo. Si sigue sin poderse enchufar, contactar con un electricista cualificado. Nunca se debe usar un alargador si el enchufe no se puede enchufar de forma correcta. Nunca se debe alterar el dispositivo de seguridad del alargador polarizado. No manipular el enchufe.
ADVERTENCIA: PARA EVITAR CALAMBRES, LA PATILLA ANCHA DEL ENCHUFE DEBE COINCIDIR CON LA RANURA ANCHA E INTRODUCIRSE COMPLETAMENTE.
Español ADVERTENCIA: No seguir las instrucciones de montaje puede resultar en incendio o descarga eléctrica.
Assembly Steps
The following steps describe how to assemble the TERTIAL work lamp. Ensure you have all parts before beginning.
Step 1: Attaching the base clamp
A diagram shows a person using a screwdriver, with a red 'X' indicating not to use it in a certain way. Another diagram shows two people looking at parts, one with a question mark, and another on the phone with an IKEA store. This suggests checking parts and contacting IKEA if needed.
The base clamp is attached to a surface using screws. The diagram shows four screws being used to secure the clamp.
Diagram Description: A base clamp with holes for screws is shown. Four screws are indicated. An arrow shows the clamp being placed onto a surface, and then rotated to secure it.
Step 2: Connecting the lamp arm to the clamp
The main lamp arm assembly, including the cord, is shown being lowered onto the attached base clamp.
Diagram Description: The articulated lamp arm with the light fixture at the top is shown. An arrow indicates it being connected to the base clamp already mounted.
Step 3: Attaching the springs
Two springs are attached to the lamp arm mechanism to provide tension and support.
Diagram Description: A close-up view shows two springs being attached to specific points on the lamp's arm joints. The springs are labeled '2x'.
Step 4: Attaching the lampshade
The lampshade is shown being attached to the light fixture at the top of the lamp arm. A close-up shows how the shade fits onto the fixture.
Diagram Description: The lampshade, a bell-shaped cover, is shown. Arrows indicate it being fitted over the light bulb socket area and secured, possibly by twisting or clipping.
Step 5: Adjusting the lamp
A diagram shows a hand adjusting a knob on the lamp arm to set the desired position and tension.
Diagram Description: A close-up of a joint on the lamp arm shows a hexagonal knob. An arrow indicates rotation of this knob to adjust the arm's stiffness.
Product Information
Importador/Distribuidor (Mexico): IKEA Supply Mexico, S.A. de C.V., Calle Oriente 158, número 440, Piso 3, Local JD-01, Colonia Moctezuma, Segunda Sección, Alcaldía Venustiano Carranza, C.P. 15530, Ciudad de México. Tel. 55-8310-8310.
Read and follow all safety and operating instructions before using this product. For indoor use only. Consult electrical specifications on the product label.
© Inter IKEA Systems B.V. 2022
