Proscenic User Manual

Introduction

Please keep this user manual readily available. Read it thoroughly and carefully before using this product.

This manual is available in multiple languages, including: Русский, English, 日本語, Deutsch, Français, español, Italiano.

Safety Instructions

Before using this product, please read and follow all regular safety precautions. Warranty service is not applicable to any damage caused by violation of instructions. The Proscenic sweeping robot is a sophisticated product restricted for indoor cleaning only. DO NOT use the robot for non-cleaning purposes.

Warning Signs

• ⚠️Danger: Indicates that any violations of instruction or improper operation are probably to cause casualties or severe injuries.
• ❗Caution: Indicates that any violations of instruction or improper operation are probably to cause injuries to people and damage to property.
• ℹ️Notice: Provides important information regarding usage and care.

Graphic and Sign Explanation

• ?Prohibited: Indicates prohibited behavior. Detailed content refers to the sign or explanation.
• ✔️Enforcement: Indicates required behavior. Detailed content refers to the sign or explanation.
• ⚠️Attention: Indicates attention (including warning) content. Detailed content refers to the sign or explanation.

Possible Severe injuries: Blindness, Burns, Electricity Injury, Fracture, Poisoning, and other severe injuries that leave sequela and lead to long-term hospitalization.

Possible Injuries: Burns, and electricity wound that does not require hospitalization.

Possible Property Damage: Damage to furniture, valuable objects, and injuries to pets.

Safety Instructions for Product, Charging Dock, Power Adapter, and Other Accessories

• Warning: Only authorized technicians can disassemble the product. Users are not allowed to disassemble, repair, or modify the product. Otherwise, it may cause electric shock, malfunction, and lead to injuries.
• ?Prohibited: Do not dismantle the battery case. Dismantling may cause damage or leakage, leading to fire or explosion.
• ?Prohibited: Do not use metal or other conducting substances to connect battery positive and negative ends. This will lead to short circuit and cause explosion.
• ?Prohibited: Do not use a power adapter with an AC inverter. This may lead to overheating, malfunction, or fire.
• ?Prohibited: When there are dust accumulations on the metal terminals of the power plug and surrounding area, clean the dust with a dry cloth. Otherwise, it may lead to electric shock, over-temperature, or fire.
• ?Prohibited: The adapter must use an alternating voltage from 100-240 Vac. Plug into the socket correctly and keep away from children's reach.
• ?Prohibited: Only use the original power adapter. Using other adapters may cause danger.
• ?Prohibited: Do not destroy or modify the power cord. Do not over-bend, heat, over-pull, or press the cord with heavy objects. This will cause damage to the cord and lead to fire or electric shock.
• ?Prohibited: Never use the product in an environment with volatile substances to avoid the possibility of fire and danger.
• ?Prohibited: This product is a sophisticated machine for indoor use only.
• ?Prohibited: Do not use this product in flammable or combustible environments (e.g., with propane gas, gasoline, or other flammable gases, or dust environments). This may lead to explosion or fire.
• ?Prohibited: DO NOT leave the product to children without supervision. This may cause injury.
• ?Prohibited: Do not wash and do not leave this product in wet or moisture environments. Do not wash the main body, charging device, or virtual wall. Washing or soaking will cause internal short circuits.
• ?Prohibited: Do not sit on top of this product. Do not allow adults, children, or animals to sit on this product to avoid damage or falling.
• ?Prohibited: To avoid stumbling, all people in the house should be notified when this product is operating. Do not touch the wheels or roller brush while the product is in operation to avoid being stumbled by the machine, especially children.
• ?Prohibited: Do not touch the power cord, plug, or adapter with wet hands. Otherwise, it may cause electric shock.
• ?Prohibited: Turn off the power switch when not using the product for a long time. Battery leakage may cause fire, injury, or pollution. Cut off the power source when using the power adapter and disconnect the plug from the socket. Otherwise, it may cause fire.
• ?Prohibited: Do not have the product covered or wrapped while using.
• ?Prohibited: This product is for indoor use only. Do not use this product to clean bathrooms, warehouses, factories, or bedrooms, etc.
• ?Air Outlet: Do not insert screwdrivers or other sharp objects into the air outlet, as this will damage the product.
• ?Prohibited: Do not wash this product. Only the dust bin and filters are washable. Do not wash other parts of this product. Reassemble the dust bin and filters once they are dry. Do not expose the product to direct sunlight.
• Charging Notice:
• ⚠️Danger: Use the dedicated battery and charging base only. Using other batteries or docking stations will cause leakage, overheating, and explosion.
• ?Prohibited: Unplug when not using the product to avoid short circuits. Do not disassemble the battery; otherwise, it will cause leakage, overheating, and explosion.
• ?Prohibited: Do not keep necklaces, hairpins, or other metal materials together with this product during transportation.
• ?Prohibited: Do not throw the battery into fire or heat the battery.
• ❗Attention: When there is overheating during charging, stop using this product immediately.
• ❗Attention: To extend battery life, take out the battery and store it in a cool, dry place when not in use.
• ?Prohibited: Do not immerse or wash this product.
• ❗Attention: Do not use this product when there are signs of unusual changes (e.g., color or shape).
• ❗Attention: The battery must be insulated with tapes when recycling or disposal. Contact with other metal will lead to heating, bursting, or fire. Bring used batteries to a technical service center or an authorized reseller for disposal, or dispose of the battery according to local laws.

It is not allowed to copy, publish, or record this user manual and related material in any searchable media or translate it into other languages without our written authorization. We have made our best efforts to ensure the precision and completeness of this user manual. If any mistakes or omissions are found, please provide feedback via email: feedback@proscenic.tw.

Product Components

Main Body and Accessories

Visual Description of Components:

• 1. Main body: The primary robot unit, circular in shape, with an integrated dust bin.
• 2. Docking Station: A compact base unit designed for automatic charging of the robot.
• 3. Adapter: The power adapter and its connecting cable for charging.
• 4. Electric Controllable Water Tank: A detachable tank that supplies water for the mopping function.
• 5. Side Brush: Two brushes located on the sides of the robot, used to sweep debris towards the main brush.
• 6. Mopping Cloth: Fabric pads attached to the water tank for wet cleaning.
• 7. HEPA filter: Filters used to capture fine dust particles from the air.
• 8. Cleaning Brush: A tool for cleaning the robot's brushes and filters.
• 9. Boundary Markers: Magnetic strips to create virtual barriers for the robot.
• 10. Remote Control: A handheld device for manual control and setting adjustments.

Main Body Diagram

Diagram Description: The main body of the robot is depicted from top and bottom views, showing its various parts.

• Top View Components: Touch Key, Cover, Bumper Strip, Bumper, Power Switch.
• Detachable Components: Dust Bin, Electric Water Tank.
• Bottom View Components: Roller Brush Cover, Roller Brush, Left Side Brush, Auto Charging Pole, Left Wheel, Bottom Cover, Front Wheel, Right Wheel, Charging Socket. A Mopping Cloth is also shown for attachment.

Docking Station

Diagram Description: The docking station is shown with its key parts labeled.

• Components: Power Indicator, Top Cover, Charging Poles, Charging Socket.

Main Body Buttons

• 'Clean' Button (?):
  • Press once: Starts auto cleaning.
  • Press and hold for more than 3 seconds: Enters WiFi connection setting.
  • Press and hold for more than 5 seconds: Enters sleep mode.
• From Sleep Mode: Press the 'Clean' button (?) to activate standby mode, then press again to start auto cleaning mode.
• Tip: If the machine is not used for a long time, it will automatically enter sleep mode.

'Wifi' Signal Light

• Flashes slowly: Indicates the robot is in WiFi connection setting mode.
• Solid light: Indicates the robot is successfully connected to WiFi.
• Flashes fast: Indicates that the internet setting has failed.

Indicator Light Introduction

• Flashing red ?: Charging
• Solid red ?: Docking
• Flashing blue ?: Standby
• Solid blue ?: Working
• Flashing alternately red and blue ??: Fault
• Wifi light flashing ?: Waiting to connect to WiFi

Remote Control

Diagram Description: The remote control unit is shown with numbered buttons corresponding to its functions.

• Functions:
• 1. Display Screen: Shows current status and settings.
• 2. Auto Charging: Initiates return to the docking station.
• 3. Direction Button: Allows manual directional control (up, down, left, right).
• 4. MAX (Power Setting): Adjusts suction power or cleaning intensity.
• 5. Clock Setting: Sets the current time on the robot.
• 6. Schedule Setting: Configures cleaning schedules.
• 7. ON/OFF: Powers the remote control or robot on/off.
• 8. Mode Setting: Selects cleaning modes:
  • Mode 1: Spot Clean Mode
  • Mode 2: Auto Clean Mode
  • Mode 3: Edge Clean Mode
  • Mode 4: Zig Zag Clean Mode

Note: Install two AAA type batteries into the remote control before use. Remove the batteries if the remote control will be left unused for a long period.

Product Operation

Setting a Schedule

1. Before setting a schedule, first set the current time on the robot. Ensure the robot is on or charging.
2. Hold down the 'CLOCK' button until the numbers on the screen flash. Use the arrow keys (⬆️/⬇️ to increase/decrease numbers, ⬅️/➡️ to toggle between hours and minutes) to set the current time. Press 'CLOCK' again when done.
3. Hold down the 'PLAN' key until the numbers on the screen flash. Use the arrow keys to set the desired hours and minutes for the schedule. Press 'ON/OFF' when done.
4. When the schedule is successfully set, a "Schedule confirmed" sound will be heard, and a small alarm will be shown on the screen.

Attention: The figures shown during the setting of a schedule are not the exact time when the robot starts to clean, but the hours *after* which the robot starts automatically. For example, if the current time is 08:00 and you set a schedule for 01:00, the robot will begin cleaning at 09:00.

Cancel Schedule

Hold down the 'PLAN' key, use the arrow keys to set the schedule to 00:00, then press 'ON/OFF'. If the schedule is successfully canceled, a "No Schedule" sound will be heard.

Boundary Markers

Proscenic Boundary Markers allow you to define areas where the robot can go and where it should "keep out." These magnetic strips can be easily cut to fit doorways, around pet bowls, cords, or anywhere you do not want the 811GB robot to go.

• Contains 3.25 feet (1 meter) of boundary markers.
• Only compatible with Proscenic 811GB.

Note: The Boundary Marker needs to be laid flat on the ground.

Battery Charging

Docking Station Placement

1. Place the docking station against the wall.
2. Remove obstacles from within 1 meter on both sides and approximately 2 meters in front of the station, as shown in the diagram.

If the robot has been shut down, power on the robot by pressing the power switch on its side for more than 3 seconds.

Charge the Robot

The robot can be charged in either of the following ways:

1. Method A: Insert the adapter into the robot's charging port and plug the other end into a power socket.
2. Method B: Place the robot onto the docking station to charge.

Charging Indicator Note:

• A. When charging, the 'Clean' button (?) signal light flashes red ?.
• B. When charging is complete, the 'Clean' button (?) signal light turns solid blue ?.

For Extending Battery Life:

1. Before first use, charge the robot for 12 hours.
2. Charge the robot as soon as possible when battery power is low.
3. The robot will automatically return to the charging station when it finishes cleaning or when battery power is low.
4. If the robot is not to be used for a long time, fully charge the battery before use and turn the power switch off.
5. If the robot is not to be used for more than 3 months, charge the robot for 12 hours.

Product Maintenance

Roller Brush Component and Mopping Cloth Assembly

Follow the steps below to assemble the roller brush component and mopping cloth:

• Step 1: Insert the Roller Brush into its designated slot.
• Step 2: Place the Roller Brush Cover over the roller brush.
• Step 3: Stick the mopping cloth onto the bottom of the water tank, ensuring it is flat and straight.

Electronic Controlled Water Tank and Dust Bin Assembly

Follow the steps below to assemble the electronic controlled water tank and dust bin:

• Step 4: Open the rubber plug on the water tank following the arrows. Fill the tank with water until full, then securely close the rubber plug.
• Step 5: Ensure the bottom rubber plug seals the water tank tightly. Wipe any water from the seepage hole area.
• Step 6: Place the Dust Bin into its relative position with the water tank, and lower the handle of the dust bin.
• Step 7: Insert the assembled Water Tank and Dust Bin unit into the correct position on the main body of the robot.

Cleaning Side Brushes

1. Make sure side brushes are not damaged and are free of foreign matter.
2. Use the cleaning kit or a cloth to clean the side brushes.
3. Removing side brushes and soaking them in warm water for five seconds can help resolve tangling and deformation.
4. Replace side brushes when they are worn.

Cleaning Dust Bin and Filters

Follow these steps to clean the dust bin and filters:

• Remove the water tank by pressing the button on its bottom and pulling the tank out.
• Open the handle of the Dust Bin.
• Lift the Dust Bin from the Water Tank.
• Open the Dust Bin Cover.
• Take out the filter and HEPA.
• Empty the Dust Bin.
• Wash the Dust Bin and Filter. Clean the HEPA with a brush.
• Install the filter and HEPA back into the Dust Bin.

Note:

• a. Wash the HEPA and primary filter after 15-30 days of use. The maximum lifespan for the HEPA and primary filter is 6 months.
• b. Reinstall the HEPA and primary filter only after they are fully dry.
• c. HEPA and primary filters can be replaced if needed.
• d. Do not dry the filters under direct sunlight.

Cleaning Roller Brush

Take out and disassemble the roller brush kit as shown in the figure. Clean it with a soft cleaning cloth or tool. The roller brush axle is washable.

Note: Please re-install the roller brush axle after it is fully dry.

Proscenic Mobile App is available on iOS and Android

1. Go to the Apple App Store (iOS) or Google Play (Android).
2. Search for "Proscenic Robotic", download, and install the app.
3. Run the app and sign up for an account for the first time.
4. Make sure your phone is connected to your current WiFi network.
5. Press and hold the 'Clean' button (?) for 3 seconds until the WiFi signal light flashes slowly. Then, click the "Search robot" button in the app.
6. Search for "Proscenic Robotic" on Amazon Alexa and link your App account.
7. Enjoy your App and Alexa voice control.

Notice: After successfully connecting to the App, pressing the power button for 3 seconds will unbind the machine.

Product Specifications

Battery Removal

1. Unscrew the screws on the battery cover with a screwdriver.
2. Remove the battery capsule cover.
3. Take out the battery.
4. Push the electrode tips connected to the battery and main body.
5. Place the new battery into the battery case with the battery label facing up.
6. Plug the wire connector that connects the battery and robot.
7. Reorganize the wire connector and wires.
8. Reinstall the battery door.
9. Lock the battery capsule cover.

Notice: Do not use non-original batteries. It may cause damage to the robot.

Manufacturer Information

Proscenic Manufacturer

• Company: Shenzhen Proscenic Technology Co., Ltd.
• Address: 5th floor, Jinshun Building, No.287 Ruyi Road, Ailian Community, Longgang District, Shenzhen City China.
• Website: www.proscenic.cn

Proscenic Head Office

• Company: Taiwan Proscenic Polytron Technologies Inc.
• Address: Yingyi Street 121 Lane 3rd Lingya District, Gaoxiong City, Taiwan.
• Website: www.proscenic.tw