Energizer QM5000

Specifications

• Model Name: QM5000
• Cell Type: Lithium Polymer
• Battery Capacity: 5000mAh/18.5Wh (Max.)
• Rated Input: USB-C 5V/2.4A
• Rated Output: USB-C 5V/3A (Max.)
• Wireless Output: 5W/7.5W/10W/15W
• Total Output: 15W (Max.)
• Dimensions: 94 (L) x 64 (W) x 18 (H) mm
• Weight: 126g ± 10g

Package Contents

• 1 x QM5000 Power Bank
• 1 x User Manual
• 1 x Charging Cable

Visual representation of package contents showing the QM5000 power bank, a user manual booklet, and a USB-C charging cable.

How to Use

Magnetic Wireless Charging

Place the power bank onto the back of your compatible smartphone. It will attach magnetically and align automatically. This feature is designed for iPhone 12 series and above.

Press the power button to activate charging on your device.

LED Indicators:

• Blinking white LED light: USB-C charging is activated.
• Solid white LED light: USB-C charging is completed.
• Blinking blue LED light: Foreign object detection. Please remove the object on top of the wireless charger.
• Solid blue LED light: Wireless charging is activated.

For wireless fast charging, please charge only one device at a time.

How to Recharge

Connect the USB-C end of the charging cable to the power bank's input port. Then, connect the other end to a universal USB AC adapter (adapter not included) to recharge the power bank.

Power Bank Indicators:

• Power Check Button: [Power Button Symbol]
• Wireless Charger LED Lights Indicator (Blue): [Blue LED Symbol]
• USB-C Input/Output Port: [USB-C Port Symbol]
• USB-C Charger LED lights Indicator (White): [White LED Symbol]

Diagram illustrating the power bank's ports: USB-C input/output, power check button, and LED indicators for wireless and USB-C charging.

Case Compatibility

Choosing the Right Case

For optimal wireless charging results, please use a compatible magnetic case.

Important Considerations:

• Do not place any metal or foreign objects on the wireless charging area.
• Avoid using cases with a thickness exceeding 4mm.
• Do not use cases with a metal ring or a magnetic pad in the middle on the back.

Safety Instructions

Please adhere to the following safety guidelines to ensure proper and safe use of the power bank:

• Avoid exposure to water, excessive heat, fire, or severe drops.
• Do not insert any objects into the USB ports other than compatible USB connectors.
• The power pack automatically shuts off after fully charging to conserve power.
• The battery may feel slightly warm during charging and recharging, which is normal.
• Clean the exterior with a lightly wetted cloth or napkin; do not use water or other cleaning products.
• Battery performance may decline after approximately 2 years of use.
• Intentional or physical damage to the battery is not covered under warranty.
• Store the battery between -10°C and +60°C; operate between 0°C and 45°C.
• Fully charge the battery before first use to maximize its lifespan.
• Do not place any metal or flammable objects on top of this product.

Compliance and Warnings

FCC Compliance

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Compliance Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Other Compliance

The product features the following compliance marks: FC [FCC Logo], CE [CE Logo], RoHS Compliant [RoHS Logo].

FCC ID: 2AU4P-QM5000

Customer Service

For any questions about the product, please contact Energizer at service@energizerpowerbanks.com.