IBL MPK 12M Electric Kettle User Manual

Important Safety Information:

• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised or instructed by a person responsible for their safety.
• Children should be supervised to ensure they do not play with the appliance.
• The appliance must not be immersed in water.
• No responsibility is accepted for damage resulting from improper use or non-compliance with instructions.
• The kettle is designed for heating water only. Never put any other liquid into the kettle, nor should it be used as another cooking appliance.
• Before inserting the main plug, check that the supply line voltage and current rating comply with the kettle's label.
• Do not operate the kettle with wet hands.
• Keep children away from the kettle when it is heating or filled with hot water.
• Prevent scalding from hot water or steam.
• Pour away the very first water boiled with this kettle before use.
• Do not touch any part of the kettle except the handle when it is filled with boiling water.
• Pour out boiling water in one go to allow the kettle's temperature to decline.
• Remove the plug from the wall socket after use, in case of malfunction, or before cleaning.
• When removing the plug, never pull on the power cord.
• Regularly clean and descale the kettle, but do not immerse the kettle, especially the heating base, in water.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.

Designation of Components

The iBELL IBL MPK 12M Electric Kettle includes:

• Glass Lid
• Kettle Body
• Kettle Base
• Water Level Scale (inside the kettle body)
• Lid Hook
• Handle
• Control Knob

Operation Guidelines

1. Filling Water:
   • Fill water between the minimum and maximum lines indicated on the kettle body.
   • Avoid water flowing onto the outside surface of the kettle when filling.
2. Locating:
   • Place the kettle on a stable, flat surface.
   • Never heat the kettle on a wet surface, and prevent water from penetrating electrical parts.
   • Do not position the kettle on or near hot surfaces or open flames.
3. Switching On:
   • Insert the main plug into the wall socket. Ensure the power cord is safely positioned.
   • Push the restoring switch.
   • The red indicator lamp will light up, indicating the kettle is heating.
4. Boiling:
   • The kettle automatically switches off a few seconds after the water boils.
   • The red indicator lamp goes out when the kettle switches off.
5. Restoring:
   • After switching off, the kettle needs time to cool down.
   • After approximately 15 seconds, the kettle can be switched on again by manually restoring the switch.
   • If the red indicator lamp remains off after pushing the restoring switch, the temperature sensing controller may still be hot. Allow more time before re-operating.

Features

• Concealed heating element with a stainless steel kettle bottom for easy cleaning.
• Temperature sensing controller with automatic switch-off when water boils.
• Dry boiling protector with boil-dry safety cutoff.
• Easy-lift hinged lid.
• Rotary (360°) cordless base for convenience.
• Shining body finish.

Warranty Terms and Conditions

The appliance is warranted for 1 year against all manufacturing defects. This warranty does not cover damage due to accident, mishandling, or non-compliance with the instructions in the manual.

1. This warranty is valid only if the warranty card is duly signed and stamped by the dealer and presented with the original customer's copy of the purchase bill.
2. The warranty period starts from the date of purchase from an authorized dealer.
3. The appliance must be used with normal care and maintenance, following the company's recommended instructions in the manual.
4. The appliance should not be repaired, tampered with, or altered by any agency or person other than authorized company personnel or their service centers.