iBELL DRY/SPRAY/STEAM/BURST IRON

About iBELL

Technology evolves at an amazing pace, surprising us with gadgets surpassing our imagination. To stay in sync with changing times and present customers with the latest innovations at affordable prices asserts the competence of a company. iBell, the consumer durables brand from India, has earned the recognition and trust of millions of customers by presenting them with the newest in home appliances. The brand provides high quality, long-lasting products at favourable prices and effective after-service.

Unlike many other brands, iBell has a wide variety of products under its label, ranging from electronics appliances to kitchenware. The brand is further diversifying its product lines in order to serve the overall requirements of a family.

التقنية تتطور تدريجيا بخطوات مدهشـــــة، يعجبنا بأدوات فوق خيــالنا. الوقوف مزامنا مع تغيير الأوقات والعمـلاء الحديثة مع ابتكارات الحديثـة بأســعار معـقولـة، وهذه هي تتأكد كفاءة الشركة. أبييل كعلامة التجـارية لأدواتالمســتهلك من الــهــند قد اكتسبت تقدير وثقة مليونات من العملاء بتقديمهم احدث لوازم المنزلية. تتوفر الشـركة منتجات عالية الجودة وطويلة المدى بسعر معتـل و خدمـات فعالة بعد البيع.

تتميز شـركة أبييل من علامات تجارية أخرى بسلاسل المنتجات المتنوعة العــديدة تحت علامتها التجاريةتتراوح من منتجات إلكترونية إلى لوازم المنزلية. وتنثــوع الشـركة خطوط المنتجات لكي تخدم جميع المتطلبات العائلية.

Product Features and Components

The iBELL SP900 Electric Steam Iron features the following components:

• 1. Spray Jet
• 2. Water input opening/Lid
• 3. Variable steam control
• 4. Temperature control
• 5. Press-button "water spray"
• 6. Hold
• 7. Water tank
• 8. Cable with plug
• 9. Movable cable-fold-protection
• 10. Stand
• 11. Pilot light
• 12. Heat resistant plate
• 13. Ceramic soleplate
• 14. Marking for maximum water-level
• 15. Self-cleaning

Important Safeguards

• Connect the steam iron only with a correctly installed power point (220-240V). Ensure that the voltage of your steam iron matches the voltage of your power supply.
• Exercise special attention when the appliance is used by or near children.
• Unplug the appliance even during short-term absences.
• Do not use the dry steam iron if the appliance, its cable, or the plug are damaged.
• Do not immerse the steam iron into water or any other liquid.
• Keep the cable away from the hot steam plate.
• Allow the steam iron to cool down completely before storing.
• Always keep the instruction manual. If the steam iron is given away to a third party, the instruction manual must be handed over as well.
• Note: Before first use, test with an old tissue to check if the steam plate and water tank are clean. Some parts may be slightly greased, which can cause smoke during the first use. This should stop after a few moments.

Before Use

Button steam / steam dry

The steam/steam dry button (6) must always be in the "0" position before filling water into the water tank and/or when the steam iron is disconnected from the main power supply. Otherwise, water may leak from the soleplate.

Remark: For steam level selection, please refer to the "Dry / Steam Function" section.

Remove the protection film from the steam plate before first use.

Use

You can use your steam iron with usual tap water. If the water hardness exceeds 17° dH, distilled or demineralized water should be used to prolong the steam iron's lifespan.

Fill in water tank (for steam ironing)

Unplug the appliance and turn the steam control knob (3) to the "0" position. Fill water into the tank, ensuring not to exceed the maximum marking when the steam iron is placed horizontally. Close the lid securely. Connect the steam iron to a correctly installed power point.

Temperature control

Place the steam iron upright and select the desired temperature using the temperature control (4). Pay attention to the care symbols on the textiles:

• Chemical fibres/synthetic
• Natural fibres/silk/wool
• Natural fibres/cotton/linen

Sort your laundry according to fabric type and the corresponding steam temperature. Iron delicate fabrics at a lower steam temperature first, as the steam iron heats up faster than it cools down.

The pilot light (11) indicates that the steam iron is heating up. Once the pilot light turns off, the selected temperature has been reached, and you can begin ironing.

Water Leakage Prevention

The temperature control dial (4) must be set to a higher level to facilitate steam ironing. If water drips from the bottom of the soleplate, it indicates that the water is not fully converting into steam due to low soleplate temperature. Increase the soleplate temperature by adjusting the temperature control dial (4) towards the maximum setting until water leakage stops.

Functions

• Anti-Calc
• Water spray
• Anti-drip

To moisten the laundry, press the water spray button (5).

Dry / Steam

You can adjust the steam intensity by turning the steam function knob:

• "0" = Steam dry
• "1" = Medium steam
• "2" = Maximum steam outflow

Burst of steam

To moisten the laundry, press the water spray button (5) fully. Note: Only use the steam burst button when the steam iron has reached the steam or maximum temperature. Do not press this button more than 3 times consecutively. Follow the water leakage prevention procedure if water drops emerge from the soleplate.

Keeping/Cleaning/Care

Switch the steam iron off (set the temperature control (4) to minimum temperature as marked on the water tank) and unplug it. Place the steam iron upright and allow it to cool down completely. Empty the water tank.

Remove residues from the steam soleplate using a vinegar-water solution. Wipe the cabinet with a damp cloth and then dry it thoroughly.

Automatic electricity interruption for security

If the installed thermostat malfunctions, the power supply will automatically cut off to prevent the steam iron from overheating. In such cases, the steam iron must be repaired by an authorized service center.

Cleaning/Care (Monthly Maintenance)

To increase the steam iron's lifespan, monthly cleaning is recommended based on usage frequency.

1. Set the steam control knob (3) to the no-steam position.
2. Fill the water tank halfway with water.
3. Place the steam iron upright.
4. Set the thermostat (4) to the "max" position and connect the steam iron to the mains.
5. Wait until the steam iron is completely hot (the pilot light switches off).
6. Unplug the steam iron.
7. Hold the steam iron horizontally over a washbasin.
8. Hot water and steam will be released from the appliance. Any residues, such as chalk deposits, should be flushed out with the released water.
9. Simulate the ironing motion until the water tank is almost empty.
10. Set the steam function to the no-steam position and connect the steam iron to the mains. Place it upright.
11. Set the thermostat (4) to the "max" position. Allow the steam iron to heat up again. The remaining water in the tank will vaporize and exit the appliance.
12. It is recommended to move the steam iron over an old tissue during this process.

Technical Data

Model No.: TP-13-02

VOLT: 220-240V, 50Hz

WATT: 2400W

Environment Friendly Disposal

You can help protect the environment! Please remember to respect local regulations: hand in non-working electrical equipment to an appropriate waste disposal center.

Service Centers

SHOP SITE SERVICE IN TAMIL NADU

1. SHIVASHARTHI ELECTRONICS
   N.K.V. Complex, L. Weat Perumal Tank Road,
   Town Hall Road, Madurai-625001
   Mr. Upendran
   Ph: 0091 - 09597590944, 0091 - 09344999001
2. MEGA DISH ANTENNA
   SATELLITE SYSTEM
   81/81A. Mettur Road, Abhirami Theaker, Agenda International Building
   Erode
   Mr. Nayibwamy
   Ph: 0091 - 09942070855
3. SANJEEV RADIUS
   Sasti Towers, 204 & 219 Oppamakare Street,
   Coimbatore - 041001
   Mr. Sanjeev Salihapathy
   Ph: 0091 - 09363115323, 0091 - 04222394124

SHOP SITE SERVICE IN KARNATAKA

1. IDEAL INDEX
   Katavpalayam
   Bangalore
   Mr. Sathwath
   Ph: 0091 - 09562155207

SHOP SITE SERVICE IN ANDHRA PRADESH

1. IDEAL INDEX
   No:22/711, HAL Colony, Gajula Ramaram, Jeedimella
   Hyderabad, 500055
   Mr. Saslu Muhammad
   Ph: 0091 - 08142743070, 0091 - 09081079955

SHOP SITE SERVICE IN NEW DELHI

1. HANIET ELECTRONICS
   38, Kinguri Bag New Delhi.
   Mr. Mark
   Ph: 0091 - 09871762939

KERALA SERVICE CENTERS

On site WARRANTY

1. TRIVANDRUM DISTRICT
   I BELL ELECTRONICS
   Chandavila, Sainik School P.O Kazhakoottam.
   Mr. Hassan
   Ph: 0091 - 9387642302
2. KOLLAM DISTRICT
   I BELL ELECTRONICS
   Ajwad Building, Andamukkam, Kollam.
   Mr. Hariz
   Ph: 0091 - 8089225557
3. PATHANAMTHITTA DISTRICT
   ARAMAM ELECTRONICS
   Chouka Jn. Punalur.
   Mr. Muhammed Riyas
   Ph: 0091 - 9497540556
4. ALAPPUZHA DISTRICT
   GAYATHRI TRADERS
   Padanad PO. Chengannur, Alappuzha.
   Mr. Gopan sankar
   Ph: 0091 - 8547500646
5. KOTTAYAM DISTRICT
   IDEAL IMPEX
   Murikkottil Building, Vattakkayam, Erattupetta.
   Mr. Reji mon
   Ph: 0091 - 9544500832
6. KOTTAYAM DISTRICT
   ALFA ASSOCIATES
   Near Anand Theater, Kottayam.
   Mr. Abhilash
   Ph: 0091 - 9544180001
7. IDUKKI DISTRICT
   BLUE MAGIC SATVISION
   Bennys Tower Near Bus stand Rajakkad, Idukki.
   Mr. Johnson
   Ph: 0091 - 9447990540
8. ERNAKULAM DISTRICT
   IDEAL IMPEX
   Opp: Elavumkudy Jewellery, Oushadhi Jn., Perumbavoor.
   Mr. Nithin
   Ph: 0091 - 9544170001
9. ERNAKULAM DISTRICT
   I BELL ELECTRONICS
   Puthumana Bldg., Karimpattla Road, Pallimukku, Cochin.
   Mr. Badusha
   Ph: 0091 - 9544500831

Call Center For Kerala: 0484 3950555 | www.ibellsworld.com