RshPets Single Bowl Wall Cat Feeder
Model: fdr1
Product Information
Material: Shelf - plywood, Bowl - glass
Maximum load capacity: approximately 15 kg
Bowl volume: 200 ml
Dimensions:
- Length: 5.5 inches (14 cm)
- Depth: 6.0 inches (15 cm)
Assembly Instructions
Parts Included:
- A (x1)
- B (x1)
- C (x1)
- 001 (x2)
- 002 (x2)
- 003 (x2)
- 004 (x1)
Tools Needed (Not Included):
Ø 8.0 mm drill bit (0.3150 inch)
Screwdriver
Steps:
- Step 1: Insert 001 into hole.
- Step 2: Insert 004 into hole and screw securely.
- Step 3: Insert 002 and 003 into holes and screw securely.
Care Recommendations
Wood Care: Clean with a soft, slightly damp cloth. Avoid harsh chemicals, bleach, or abrasive cleaners. Do not expose to excessive moisture. To maintain the natural look, you may occasionally reapply wood oil.
Important Safety Information
ATTENTION!!! For cats only. Use by children is strictly prohibited!!
This product is not designed for heavy loads! Never lean on the feeder! Risk of injury!
Recommendations for placement: not above heat sources, not in places with high humidity.
Regularly check the product for damage and secure attachment to the wall. This is important! Replace the product if it is faulty or missing any parts, otherwise the possibility of injury to the animal cannot be ruled out.
Warranty and Returns
2 years warranty and 30 days return. More information on the RshPets website.
Producer's Contact
RshPets Ltd.
ul. Maria Curie Skłodowska 3/27
20-029 Lublin
Poland
Email: rshpets.office@gmail.com
Website: rshpets.com
YouTube: youtube.com/@rshpetscompany
Instagram: instagram.com/rshpets/
Facebook: facebook.com/rshpetscom