RshPets Double Cat Feeder with Glass Bowls
Assembly and Care Instructions
Product Information
Material: Shelf - plywood, Bowls - glass
Bowl Volume: 200 ml
Maximum Load Capacity: Approximately 15 kg
Dimensions: Length: 10.4 inches (26 cm), Depth: 6.0 inches (15 cm)
Assembly Instructions
Parts Included:
- 001 x1
- 002 x2
- 003 x2
- 004 x1
Steps:
- Insert 001 into hole.
- Insert 002 and 003 into holes.
- Insert 004 into hole and screw securely.
Note: Some parts (e.g., screws) may not be included but are necessary for installation.
Wall Mounting Surfaces:
- Brick, concrete, stone
- Plasterboard (12-16mm or 0.47-0.63 inches)
Care Recommendations
Wood Care:
Clean with a soft, slightly damp cloth. Avoid harsh chemicals, bleach, or abrasive cleaners. Do not expose to excessive moisture. Reapply wood oil occasionally to maintain the natural look.
Important Safety Information
ATTENTION!!! This product is intended for animals only. Use by children is strictly prohibited. This product is not designed for heavy loads. Never lean on the feeder. Risk of injury! Ensure the product is securely attached to the wall. Regularly check for damage and replace if faulty or missing parts to prevent potential injury to the animal.
Placement Recommendations: Avoid placing near heat sources or in areas with high humidity.
Warranty and Returns
2 years warranty and 30 days return policy. More information available on the RshPets website.
Producer's Contact
RshPets Ltd.
ul. Maria Curie Skłodowska 3/27
20-029 Lublin
Email: rshpets.office@gmail.com
Website: rshpets.com
Facebook: facebook.com/rshpetscom
Instagram: instagram.com/rshpets/
YouTube: youtube.com/@rshpetscompany