Mad Dog GH950 7.1 Wireless Headset Black

Safety and Hazard Conditions

Before using the device, please read the entire user manual carefully.

1. Use the device according to its intended purpose described in the user manual. Do not interfere with or change the design of the device as this may be dangerous.
2. Do not immerse the device in water or other liquids. Do not expose the device to moisture.
3. Do not use the device in dusty rooms and do not store it near or on hot surfaces.
4. To avoid damage to your hearing, never operate the device at a high volume level for a prolonged period of time. Make sure that the device with a fixed high volume will not be used by children whose hearing is particularly vulnerable to damage.
5. Do not expose the device to severe shocks.
6. If you experience discomfort while using the device, stop using it immediately.
7. Take special care when using the headset while performing any activity, as they impair your ability to hear.
8. The product should be stored out of the reach of children.
9. Do not use the device if you notice that any of its components is damaged.
10. Any repairs should be ordered from the manufacturer, an authorized service center, or a person with appropriate qualifications.
11. When disconnecting the device, always pull the plug, and not the cord.
12. Do not place heavy objects on the headset, as this may cause damage or deformation.
13. Cushions may become damaged as a result of prolonged storage or use.
14. Do not braid and wrap the cord around your neck. Failure to follow this precaution may result in asphyxiation.

Introduction

Thank you for the trust you have placed in us when you purchased a Mad Dog device. We are convinced that this high-quality device will provide you with a lot of joy and satisfaction during its use.

PLEASE CAREFULLY READ AND FOLLOW THE USER MANUAL!

This device is intended for domestic or other non-commercial use. The producer will not be held liable for damages resulting from improper or incompatible use.

Main Features

• Self-adjusting headband
• RGB backlight
• High sensitivity microphone
• 7.1 Sound

Specifications and Technical Data

• Microphone: Yes, detachable
• Speaker impedance: 64 Ω ±15 %
• Headphones frequency response: 20Hz – 20kHz
• Speaker sensitivity: 111 dB ± 3 dB
• Microphone sensitivity: -38 ±3 dB
• Diaphragm Dia: 53mm
• Connectivity: USB
• Battery: 750mAh 3.7V
• Frequency: 2.4GHz
• Frequency range: 2403 MHz – 2477 MHz
• Maximum TX power: -12.91 dBm
• Charging time: up to 3 hours
• Charging Voltage: 5V DC 500mA
• Full battery playback time: up to 25 hours* (*concerns volume setting of 50%)

What's in the Box

• MAD DOG GH950 Headset
• Detachable microphone
• Wi-Fi Adapter
• USB to USB-C cable
• User manual and warranty conditions

Product Description

1 – On/Off button

2 – Volume regulator (+)

3 – Volume regulator (-)

4 – Charging socket/Wired headphone jack

5 – 2.0 / 7.1 Sound switch and Gaming mode/ BT mode switch

6 - Backlight setting button

7 – Microphone on/off

8 – Detachable microphone

9 – RGB headset backlight

10 – Leather ear muffs

11 - Adjustable headband

12 – Headphone operation indicator

13 – Wi-Fi adapter

14 - USB to USB-C cable

Diagram showing the headset with numbered parts.

Installation

The headset can be used by connecting it in 3 different ways:

• via Bluetooth connection,
• connection with use of the 2.4 GHz Wi-Fi adapter,
• connection via USB - USB-C cable.

To connect the headphones via BT, select the BT (Bluetooth mode) connection mode. To select the appropriate mode, press the Gaming mode/ BT mode change button (5) twice quickly. The selected mode will be prompted by an audible message from the headphones: “Bluetooth mode” or “Gaming mode”.

After selecting the appropriate mode, it will be possible to connect the headphones using BT.

To use the headphones in 2.4 GHz mode, connect the headset adapter to the USB port of your device, and then turn on the headphones. The device will automatically install the necessary drivers and the headset will be ready for use.

Operating the Device

For Wi-Fi connection

Headset operation status indicator

• Red color - charging, low level of charge.
• Continuous blue color - the device is connected.
• Flashing blue - the device is ready to connect.

Wi-Fi Adapter

• Continuous blue color - the device is connected.
• Flashing (fast) blue - low battery level.
• Flashing (slow) blue – the transmitter is ready to connect to the headphones.
• No backlight - microphone off.

Audible messages in headphones

For Bluetooth connection

In BT mode, the switching from 2.0 to 7.1 is not possible.

Connecting the headset with use of the USB – USB-C cable

The headset will be automatically configured once connected to the computer using the cable included in the set. No additional software will be required to use the headset.

Low headset battery warning

Once the headset battery level is low, a reminder will appear in the headphones in the form of a short beep repeated every minute until the headset is completely powered down.

It is recommended to immediately connect the headset to the charging system after you hear the characteristic sound repeated every minute. Refraining from completely discharging the battery will extend its service life.

Charging the Battery

Before using it for the first time, we recommend that you fully charge the headset battery. To do this, use the included USB Type-C cable – insert the smaller cable plug into the battery charging port and the wider USB-A plug into the charging socket, e.g. computer, 5V DC charger. The charging indicator will turn red. Once the battery is fully charged, the indicator will turn blue. It takes about 3 hours to fully charge the battery. The headset will play an audible message to notify about low battery level.

CAUTION! DO NOT USE HEADSET WHILE CHARGING THE BATTERY.

CAUTION! BATTERY DETERIORATION DURING OPERATION OF THE DEVICE IS A NATURAL PHENOMENON. COMPLIANCE WITH THE FOLLOWING NOTES WILL HELP YOU TO KEEP THE BATTERY IN GOOD CONDITION FOR A LONG PERIOD OF USE.

Never start the device with a discharged battery. Charge the battery according to the voltage and charging current data on the rating plate. Charge the battery before a longer period of storage of the device, do not store a device with a discharged battery. Incomplete charging of the battery can result in its faster wear and tear, always charge the battery to its full capacity. Once the battery is fully charged, disconnect the charger plug from the charging socket on the device. Do not leave the device unattended while charging. Using chargers and cables incompatible with the device can lead to product damage and even battery explosion.

Declaration

ART-DOM Sp. z o.o. hereby declares that the GH950 Gaming headset complies with the relevant requirements of the UE harmonisation legislation: i.e. the Directive 2014/53/EU and other UE harmonisation regulations. The full text of the EU declaration of conformity is available at the following address: www.artdom.net.pl/deklaracja/GH950/

Eco-Friendly and Green Disposal

This device is marked, in accordance with Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on waste electrical and electronic equipment (WEEE), with the symbol of a crossed-out waste container: ?️

Do not dispose of the device marked with this symbol together with household waste. For disposal, return the device to your local waste treatment and disposal facility or contact your local authorities.

YOU CAN HELP PROTECT THE ENVIRONMENT!

Proper handling of waste electrical and electronic equipment contributes to avoiding harmful consequences for human health and the environment resulting from the presence of hazardous components and improper storage and processing of such equipment.

Headset Warranty Conditions

1. ART-DOM Sp. z o.o. with its registered office in Łódź (92-402) at ul. Zakładowa 90/92 National Court Register Number 0000354059 (Guarantor) guarantees that the purchased device is free from physical defects. The warranty covers only defects resulting from the causes inherent in the item sold (manufacturing defects).
2. A disclosed defect will be removed at the Guarantor's expense within 14 days from the date of reporting the damage to the authorized service or point of sale.
3. In exceptional cases, e.g. the need to import spare parts from their manufacturer, the repair period may be extended up to 30 days.
4. The warranty period for the user is 24 months from the date of delivery of the goods.
5. The goods are intended for use only in the conditions of an individual household.
6. The present warranty does not cover:
   • damage caused by using the device in a manner inconsistent with the user manual,
   • mechanical, chemical or thermal damage,
   • repairs and modifications made by companies or persons that were not authorized to do so by the manufacturer,
   • parts that are easy to use or consumables such as: batteries, bulbs, fuses, filters, knobs, shelves, accessories,
   • installation, maintenance, inspection, cleaning, unlocking, removal of contaminants and instruction.
7. The Guarantor will select the mode of defect removal at its own discretion. Removal of a confirmed defect of the device will take place through warranty repair or replacement of the device. The Guarantor may perform repairs when the buyer requests replacement or the Guarantor may perform replacements when the buyer requests repair, if bringing the goods (device) into conformity in accordance with the granted warranty in the manner selected by the buyer is impossible or would require excessive costs at the part of Guarantor. In particularly justified cases, if both repair and replacement are impossible or would require excessive costs for the Guarantor, the Guarantor may refuse to bring the goods into compliance with the granted warranty and propose another way to settle the warranty claim.
8. The exchange of goods is made at the point of sale at which the goods were purchased (replacement or refund) or an authorized service point, if it offers such service (replacement). The returned device must be complete, without mechanical damage. Failure to comply with these conditions may result in failure to accept the warranty claim.
9. In the event of non-compliance of the goods with the sales contract, the buyer is entitled by law to legal protection measures on the part and at the expense of the seller, and the warranty does not affect these legal protection measures.
10. The warranty is valid in Poland.
11. The condition for the warranty repair or replacement of the device is the presentation of proof of purchase and the use of the goods in accordance with the information contained in the user manual.

CAUTION!

Damage or removal of the rating plate from the device may result in warranty being deemed void.

We are constantly improving our products, so they may differ slightly from the images presented on the packaging and in the user manual. Please read the user manual carefully before operating the device.

ART-DOM Sp. z o.o., ul. Zakładowa 90/92, 92-402 Łódź. National Court Register number 0000354059.