Acekool

Wifi Connection

Follow these steps to connect your Acekool device to your Wifi network:

App Download and Setup:

• Download and open the Acekool APP. Scan the QR code provided.
• Ensure your mobile phone has Wifi, Bluetooth, and Location services enabled.
• Your Wifi network must be a 2.4G network.

Device Connection Process:

Step 1: Power and Mode Activation

• After connecting the power supply, turn on the switch located behind the device.
• Press the "Power" button on the operation panel.
• Press and hold the "Timer" button for 5 seconds to enter Wifi Connection mode. The Wifi icon will flash to indicate this mode.

Step 2: Device Search and Addition

• Navigate to the automatic device search page within the APP.
• Search for your device and then add it.

Connection Stages Visualized:

The following stages are typically shown in the app:

1. Add Device
2. Automatically search for devices
3. Fill in Wifi password
4. Auto connect
5. Device naming

QR Codes for App Download:

For iOS: [QR Code for iOS App Download]

For Android: [QR Code for Android App Download]