Teltonika Networks RUT955 Datasheet

Hardware Overview

The RUT955 features a robust design with various ports and indicators for monitoring and connectivity.

Front View

• LAN Ethernet ports: 3 x 10/100 Mbps ports (LAN1, LAN2, LAN3)
• WAN Ethernet port: 1 x 10/100 Mbps port
• LAN LED: Indicates LAN port status
• Power socket: For power adapter connection
• PWR LED: Indicates power status
• RS232 interface: For serial communication
• I/O connector: Input/Output terminals
• Mobile connection status LED: Indicates cellular connection status
• RS485 interface: For industrial communication
• WAN LED: Indicates WAN connection status
• Mobile signal strength indication LEDs: Displays cellular signal strength

Back View

• Mobile AUX antenna connector: SMA connector for auxiliary cellular antenna
• GNSS antenna connector: SMA connector for GPS/GNSS antenna
• Mobile MAIN antenna connector: SMA connector for main cellular antenna
• SIM holder: Dual SIM slots (SIM1, SIM2)
• WiFi antenna connectors: RP-SMA connectors for WiFi antennas
• USB connector: For external devices
• Reset button needle: For resetting the device

Power Socket Pinout

• Power / Red wire
• Ground / Black wire
• Input / Green wire
• Output / White wire

Features

Mobile

• Mobile module: 4G (LTE) Cat 4 up to 150 Mbps, 3G up to 42 Mbps, 2G up to 236.8 kbps.
• SIM switch: 2 SIM cards with auto-switch based on signal, data limit, roaming, etc.
• Status: Signal strength (RSSI, SINR, RSRP, RSRQ), bytes sent/received, connected band, IMSI, ICCID.
• SMS: Status, configuration, send/read via HTTP POST/GET, email integration, etc.
• Black/White list: Operator black/white list.
• Band management: Band lock, used band status display.
• APN: Auto APN support.
• Bridge: Direct connection (bridge) between mobile ISP and device on LAN.
• Passthrough: Router assigns its mobile WAN IP address to another device on LAN.
• Multiple PDN (optional): Possibility to use different PDNs for multiple network access.

Wireless

• Wireless mode: IEEE 802.11b/g/n, Access Point (AP), Station (STA).
• WiFi security: WPA2-Enterprise, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation.
• SSID: SSID stealth mode and access control based on MAC address.
• WiFi users: Up to 100 simultaneous connections.
• Wireless Hotspot: Captive portal, internal/external Radius server, customizable landing page.

Network

• Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2).
• Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, MQTT, Wake On Lan (WOL).
• VoIP passthrough support: H.323 and SIP-alg protocol NAT helpers.
• Connection monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection.
• Firewall: Port forward, traffic rules, custom rules.
• DHCP: Static and dynamic IP allocation, DHCP Relay, Relayd.
• QoS / Smart Queue Management (SQM): Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e.
• DDNS: Supported >25 service providers, others configurable.
• Network backup: VRRP, Mobile, Wired and WiFi WAN options with automatic Failover.
• Load balancing: Balance internet traffic over multiple WAN connections.
• SSHFS (optional): Mount remote file system via SSH protocol.

Security

• Authentication: Pre-shared key, digital certificates, X.509 certificates.
• Firewall: Pre-configured rules, unlimited CLI configuration; DMZ; NAT; NAT-T.
• Attack prevention: DDOS prevention (SYN flood, SSH attack, HTTP/HTTPS attack), port scan prevention.
• VLAN: Port and tag based VLAN separation.
• Mobile quota control: Set custom data limits for SIM cards.
• WEB filter: Blacklist for blocking unwanted websites, whitelist for allowed sites.
• Access control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter.

Ethernet

• WAN: 1 x WAN port (configurable as LAN), 10/100 Mbps, auto MDI/MDIX.
• LAN: 3 x LAN ports, 10/100 Mbps, auto MDI/MDIX.

VPN

• OpenVPN: Multiple clients and server, 12 encryption methods.
• OpenVPN Encryption: DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC.
• IPsec: IKEv1, IKEv2, up to 4 tunnels, 5 encryption methods (DES, 3DES, AES128, AES192, AES256).
• GRE: GRE tunnel.
• PPTP, L2TP: Client/Server services.
• Stunnel: TLS encryption for clients/servers.
• DMVPN: Scalable IPsec VPNs.
• SSTP: SSTP client instance support.
• ZeroTier: ZeroTier VPN.
• WireGuard: WireGuard VPN client and server support.

Modbus

• MODBUS TCP SLAVE: ID range [1;255] or any, Allow Remote Access via WAN, Custom registers.
• MODBUS TCP MASTER: Supported functions (01-06, 15-16), Supported data formats (8-bit, 16-bit, 32-bit).
• MODBUS RTU MASTER (RS232): Baud rates (300-115200), functions, data bits, stop bits, parity, flow, duplex (Full).
• MODBUS RTU MASTER (RS485): Baud rates (300-115200), functions, data bits, stop bits, parity, flow, duplex (Half).
• MODBUS DATA TO SERVER: Protocol (HTTP(S), MQTT, Azure MQTT).

MQTT Gateway

• Allows sending commands and receiving data from Modbus Master through MQTT broker.

Monitoring & Management

• WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, logs.
• FOTA: Firmware update from server, automatic notification.
• SSH: SSH (v1, v2).
• SMS: Status, configuration, send/read.
• CALL: Reboot, Status, WiFi/Mobile data on/off, answer/hang-up.
• TR-069: Supports various ACS platforms.
• MQTT: MQTT Broker, MQTT publisher.
• SNMP: SNMP (v1, v2, v3), SNMP trap.
• JSON-RPC: Management API over HTTP/HTTPS.
• MODBUS: MODBUS TCP status/control.
• RMS: Teltonika Remote Management System.

IoT Platforms

• Supports monitoring for Clouds of things, ThingWorx, Cumulocity, and Azure IoT Hub, providing device data, network info, and connection status.

System Characteristics

• CPU: Atheros Wasp, MIPS 74Kc, 550 MHz.
• RAM: 128 MB, DDR2.
• FLASH storage: 16 MB, SPI Flash.

Firmware / Configuration

• WEB UI: Update FW from file, check FW on server, configuration profiles, backup/restore.
• FOTA: Update FW/configuration from server.
• RMS: Update FW/configuration for multiple devices.
• Keep settings: Update FW without losing current configuration.

Firmware Customization

• Operating system: RutOS (OpenWrt based Linux OS).
• Supported languages: Busybox shell, Lua, C, C++.
• Development tools: SDK package provided.

Serial

• RS232: DB9 connector, full RS232 (RTS, CTS).
• RS485: Full Duplex (4 wires) and Half Duplex (2 wires), 300-115200 baud rate.
• Serial functions: Console, Serial over IP, Modem, Modbus gateway, NTRIP Client.

Location Tracking

• GNSS: GPS, GLONASS, BeiDou, Galileo, QZSS.
• Coordinates: Via WebUI, SMS, TAVL, RMS.
• NMEA: NMEA 0183.
• NTRIP: Networked Transport of RTCM via Internet Protocol.
• Server software: TAVL, RMS.
• Geofencing: Configurable multiple geofence zones.

Input/Output

• Input: 1 x digital input (0-3V), 1 x digital galvanically isolated input (0-30V), 1 x analog input (0-24V), 1 x Digital non-isolated input (on 4-pin power connector).
• Output: 1 x digital open collector output (30V, 250mA), 1 x SPST relay output (40V, 4A), 1 x Digital open collector output (30V, 300mA, on 4-pin power connector).
• Events: SMS, EMAIL, RMS.

USB

• Data rate: USB 2.0.
• Applications: Samba share, USB-to-serial.
• External devices: HDD, flash drive, modem, printer.
• Storage formats: FAT, FAT32, NTFS.

SD Card

• Physical size: Micro SD.
• Applications: Samba share.
• Capacity: Up to 32 GB.

Power

• Connector: 4-pin industrial DC power socket.
• Input voltage range: 9-30 VDC with reverse polarity protection and surge protection (>31 VDC, 10us max).
• PoE (passive): Via spare pairs on LAN port; not compatible with IEEE802.3af, 802.3at, 802.3bt.
• Power consumption: < 2 W idle, < 7 W Max.

Physical Interfaces (Ports, LEDs, Antennas, Buttons, SIM)

• Ethernet: 4 x RJ45 ports, 10/100 Mbps.
• I/O's: 2 x Inputs and 2 x Outputs on 10-pin industrial socket; 1 x Digital input and 1 x Digital output on 4-pin power connector (from HW revision 1600).
• Status LEDs: 1 x bi-color connection status LED, 5 x connection strength LEDs, 4 x LAN status LEDs, 1 x Power LED.
• SIM: 2 x Mini SIM slots (2FF), 1.8V/3V, external SIM holders, eSIM (Optional).
• Power: 1 x 4-pin power connector.
• Input/output: 1 x 10-pin industrial socket.
• Antennas: 2 x SMA for LTE, 2 x RP-SMA for WiFi, 1 x SMA for GNSS.
• USB: 1 x USB A port.
• SD card: Micro SD card slot.
• RS232: 1 x DB9 socket.
• RS485: 1 x 6-pin industrial socket.
• Reset: Reboot/User default reset/Factory reset button.

Specifications

Physical Specification

• Casing material: Aluminium housing, plastic panels.
• Dimensions (W x H x D): 110 x 50 x 100 mm.
• Weight: 287 g.
• Mounting options: DIN rail (two sides), flat surface placement.

Operating Environment

• Operating temperature: -40 °C to 75 °C.
• Operating humidity: 10% to 90% non-condensing.
• Ingress Protection Rating: IP30.

Regulatory & Type Approvals

• Regulatory: CE/RED, FCC, IC/ISED, EAC, RCM, PTCRB, RoHS, WEEE, Wi-Fi Alliance, Anatel, GCF, REACH, E-mark, DNV GL, ECE Regulation 118, Morocco ANRT, Thailand NBTC, Ukraine UCRF, SDPPI (POSTEL), WiFi Certified, Modbus Conformance.
• Operator: AT&T, Verizon.
• Regulatory: ECE R10 (E-mark), ECE R118.

EMI Immunity

• Standards: Draft EN 301 489 series, FCC 47 CFR Part 15B, ANSI C63.4.
• ESD: EN61000-4-2:2009.
• RS: EN 61000-4-3:2006 + A1:2008 + A2:2010.
• EFT: EN 61000-4-4:2012.
• Surge immunity (AC Power Line): EN 61000-4-5:2006.
• Surge immunity (Ethernet ports): EN 61000-4-5:2014, clause 7.1 of ITU-T K21.
• Transient and surges: ISO 7632-2:2004.
• CS: EN 61000-4-6:2009.
• DIP: EN 61000-4-11:2004.

RF

• Standards: EN 300 328 V2.1.1, EN 301 511 V12.5.1, EN 301 908 series, EN 303 413 V1.1.0, AS/CA S042 series, AS/NZS 4268:2017, FCC 47 CFR Part 15C, FCC 47 CFR Part 22H, FCC 47 CFR Part 24E, FCC 47 CFR Part 27C, RSS-Gen, RSS-247, RSS-132, RSS-133, RSS-139, RSS-130.

Safety

• Standards: IEC 60950-1, AS/NZS 60950.1, EN 50665, EN 62311, FCC 47 CFR Part 1 1.1310, RSS-102.

Environmental

• Ingress Protect: LST EN 60529:1999+A1+AC:2002.
• Vibration: Class guideline-DNVGL-CG-0339:2016, EN 60068-2-6:2008.

Installation & Configuration

Hardware Installation

1. Push the SIM holder button with the SIM needle.
2. Pull out the SIM holder.
3. Insert your SIM card into the SIM holder.
4. Slide the SIM holder back into the router.
5. Attach all antennas.
6. Connect the power adapter to the socket on the front of the device, then plug the other end into a power outlet.
7. Connect to the device wirelessly using SSID and password from the device label, or use an Ethernet cable connected to a LAN port.

Login to Device

1. Open a web browser and navigate to http://192.168.1.1.
2. Enter the username 'admin' and password 'admin01' when prompted.
3. You will be required to change your password upon first login. The new password must be at least 8 characters long, including one uppercase letter, one lowercase letter, and one digit.
4. After changing the password, the Configuration Wizard will start to help set up main operating parameters.
5. Go to the Overview page and check the Signal Strength indication. Adjust antennas or device location for optimal cellular performance.

Technical Information

Radio Specifications

• RF technologies: 2G, 3G, 4G, WiFi, GNSS.
• Max RF power: 33 dBm@GSM, 24 dBm@WCDMA, 23 dBm@LTE, 20 dBm@ WiFi.

Bundled Accessories Specifications

• Power adapter: Input: 0.4A@100-240VAC, Output: 9VDC, 1A, 4-pin plug.
• Mobile antenna: 698~960/1710~2690 MHz, 50 Ω, VSWR<3, gain 3 dBi, omnidirectional, SMA male connector.
• WiFi antenna: 2400~2483.5 MHz, 50 Ω, VSWR<2, gain 5 dBi, omnidirectional, RP-SMA male connector.
• GNSS antenna: 1575.42~1602 MHz, 2.2~5 VDC, VSWR<1.5, gain 28 dB (typ.), RHCP polarization, SMA male connector.

What's in the Box?

The standard package for the RUT955 typically includes:

• Router RUT955
• 9 W PSU
• 2 x LTE antennas (magnetic mount, SMA male, 3 m cable)
• 2 x WiFi antennas (magnetic mount, RP-SMA male, 1.5 m cable)
• GNSS antenna (adhesive, SMA male, 3 m cable)
• RS485 connector block
• I/O connector block
• Ethernet cable (1.5 m)
• SIM Adapter kit
• RMS Flyer
• QSG (Quick Start Guide)
• Packaging box

Order Codes & Versions

Standard Order Codes

For more information on available packaging options, please contact Teltonika Networks directly.

Available Versions

¹ Router is not certified on Bell, T-Mobile network. Price and lead-times for region-specific versions may vary. Contact Teltonika Networks for details.

Mounting Options

DIN Rail Kit

DIN RAIL KIT Components: DIN Rail adapter; Philips Pan Head screw #6-32×3/16, 2pcs for RUT2xx/RUT9xx.

ORDER CODE: PR5MEC00

Compact DIN Rail Kit

DIN RAIL KIT Components: Compact plastic DIN Rail adapter (70x25x14.5mm); Philips Pan Head screw #6-32×3/16, 2pcs.

ORDER CODE: PR5MEC11

Surface Mounting Kit

DIN RAIL KIT Components: Surface mounting kit; Philips Pan Head screw #6-32×3/16, 2pcs.

ORDER CODE: PR5MEC12

For more information on all available packaging options, please contact Teltonika Networks directly.

Dimensions & Measurements

Main Measurements

W x H x D dimensions for RUT955:

• Device housing*: 110 x 50 x 100 mm
• Box: 355 x 60 x 175 mm

*Housing measurements are presented without antenna connectors and screws.

Top View

The diagram shows the RUT955 from the top, with dimensions:

• Overall width: 100 mm
• Depth: 109.6 mm
• Component placement details indicated by measurements like 93.9 mm, 10.5 mm.

Right View

The diagram shows the RUT955 from the right side, with dimensions:

• Overall height: 50.1 mm
• Overall width: 100 mm
• Component placement details indicated by measurements like 48 mm, 2.2 mm, 18.1 mm, 5x 6.4 mm, 14.2 mm.

Front View

The diagram shows the RUT955 from the front panel side, with dimensions for ports and features:

• Overall height: 50.1 mm
• Overall width: 109.6 mm
• Various port and component placements detailed with measurements (e.g., 43.6, 31.5, 29, 26.3 for LAN ports; 13.4, 14, 21.7 for RS232/I/O).

Rear View

The diagram shows the RUT955 from the back panel side, with dimensions for ports and features:

• Overall height: 50.1 mm
• Overall width: 109.6 mm
• Various port and component placements detailed with measurements (e.g., 14.2, 22.2, 42.5 for SIM/USB/WiFi; 5.5, 9.4, 22.9 for Reset/I/O).

Mounting Space Requirements

The figure depicts an approximation of the device's dimensions when cables and antennas are attached, showing overall dimensions of approximately 150 mm (length) x 110 mm (width) x 51 mm (height), with additional space for connectors and cables.

DIN Rail

The scheme illustrates the protrusion measurements of an attached DIN Rail, indicating a protrusion of approximately 16 mm.