Q53 Wireless RGB BT Speaker User Manual

1: Instruction

Before using this product, please carefully read the instructions to avoid any confusion.

1. Firstly, press the switch on/off button of this product. Then, open your smart devices to connect to the Bluetooth named "Q53". Upon successful connection, you will hear a "Ding dong" voice prompt for pairing.
2. After connecting via Bluetooth, you can play any music on your smart devices anytime, anywhere.

2: How to Use

Follow the diagrams for product button instructions.

The product is a compact, round wireless speaker. The diagram shows the physical layout of the controls and ports:

• 1: Switch On/Off button.
• 2: Volume Down/Previous Song button.
• 3: Volume Up/Next Song button.
• 4: Mode Switch/RGB Lights Switch button.
• 5: Type-C Charging Port.
• 6: TF Card Slot.

Detailed Button and Port Functions:

• Button 1 (On/Off, Play/Pause): Long press for 3 seconds to switch the device on or off. Short press to pause or play music.
• Button 2 (Volume Down, Previous Song): Long press to go to the previous song. Short press to decrease the volume.
• Button 3 (Volume Up, Next Song): Long press to go to the next song. Short press to increase the volume.
• Button 4 (Mode/RGB Lights, TWS): Long press to switch modes (e.g., TF card mode if a TF card is inserted). Short press to change RGB light modes. Dual press to connect or disconnect the TWS (True Wireless Stereo) function.
• Port 5 (Type-C Charging): Connect the provided charging cable here to charge the unit when the battery is low.
• Slot 6 (TF Card): Insert a TF card containing music files to play music directly from the card.

FCC Caution

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.