Selltec 270161 FLAT LED Panel Light

Product Overview

This document provides essential information for the Selltec 270161 FLAT LED panel light. Selltec GmbH is located at Industriestraße 34, D-59457 Werl. Contact can be made via +49(0)2922 9721 9290 or Kundenservice@neuhaus-group.de. Further information is available at www.neuhaus-group.de.

This product contains light sources of energy efficiency class [E].

Technical Specifications

• Model: 270161 - FLAT
• Article Number: E0040085
• Main Light Power: 14 W
• Main Light Luminous Flux: 1,700 lm
• Backlight Power: 6 W
• Backlight Luminous Flux: 750 lm
• Total Power: 24 W
• Total Luminous Flux: 1,820 lm
• Lifespan: 20,000 h (main light) / 30,000 h (backlight)
• Color Temperature Range: 2,700 K - 5,000 K
• Switching Cycles: 15,000 x
• Response Time: < 0.5 s
• Wireless Frequency: 2.4 GHz
• Wireless Power: 6 dBm

Dimensions and Electrical Information

The Selltec 270161 FLAT is a square LED panel light.

Electrical Input: 230V / 50Hz AC.

Internal Components: The fixture includes one LED board rated at 90V DC / 14 W and a second LED board rated at 48V DC / 6 W.

Remote Control Power: The remote control requires 2x AAA 1.5V batteries.

Electrical Connections: For wiring, the terminals are marked as follows: 'a' for Live (L), 'b' for Neutral (N), and 'c' for Earth connection.

Operation and Remote Control

The included remote control allows for full management of the LED panel's functions.

Remote Control Functions:

• Power: [power ON/OFF] button to turn the light on or off.
• Dimming: [dim up] and [dim down] buttons to adjust brightness from 100% down to 12% and vice versa.
• Color Temperature: Buttons to select specific color temperatures (e.g., 2,700K, 3,500K, 5,000K) and transition smoothly between them.
• Memory Function: [memory] button to save and recall preferred settings.
• Timer Function: [timer] button for a 15-minute auto-off function.

Dimming Selection:

The dimming function can be applied to:

• 1. Main light only
• 2. Backlight only
• 3. Both main light and backlight simultaneously

Remote Control Pairing Instructions:

If your light is not assigned to the enclosed remote control, follow these steps to pair them:

1. Turn the light ON using the wall switch.
2. Perform one of the following pairing sequences within a short timeframe (typically less than 2 seconds for rapid presses):
   • Sequence 1: With the light ON, press and hold the 'Select' button for more than 5 seconds.
   • Sequence 2: With the light ON, press the 'Select' button twice quickly (within 2 seconds).
   • Sequence 3: With the light ON, press the 'Select' button three times quickly (within 2 seconds).
   • Sequence 4: With the light ON, press the 'Select' button four times quickly (within 2 seconds).
3. The light will indicate successful pairing, often by flashing or changing color.

Example Operation: Main light ON, backlight OFF.