Warranty & Terms of Sale - FW Murphy Production ControlsFW Murphy Production Controls
Instruction Manual for FW MURPHY models including: G3AD M-VIEW Touch Adapter Panels, G3AD, M-VIEW Touch Adapter Panels, Touch Adapter Panels, Adapter Panels, Panels
Fwmurphy.com List most popular names › Url: https://www.fwmurphy.com/uploaded/documents/pdfs/2115398
Centurion™ C5 Series | FW Murphy Production Controls
File Info : application/pdf, 1 Pages, 176.88KB
DocumentDocumentsect. 50 2115398 rev. 2021/06/15 Model G3AD G3 to M-VIEW® Touch Adapter Panels The model G3AD adapter panels provide the necessary hardware to install an M-VIEW® Touch into an existing cutout where a G3 unit once resided. These panels are coated with a durable silver finish that match the powder coat used on the M-VIEW Touch series HMI. Also included in the kit are the necessary KEPS nuts and panel gasket required to meet any NEMA 4X/IP66 (face only) application. Mounting Procedure 1. Remove existing G3 HMI from panel. 2. Install new G3 to M-VIEW Touch adapter panel into existing G3 cutout using the supplied panel gasket. 3. Install new KEPS nuts (supplied) onto new panel and tighten evenly for uniform gasket compression. Note: Tightening the KEPS nuts beyond a maximum of 17 inch-pounds (1.92 N-m) may cause damage to the front panel. 4. Install new M-VIEW Touch into adapter panel using the mounting clips supplied and tighten to 6.0 pound-force inch (96 ounce-force inch) evenly for uniform gasket compression. * The mounting clips may or may not need the mounting foot removed in certain installations, depending on how close the M-VIEW Touch is to the original G3 cut out. Adapter Panel Dimensions Ordering Information Model NO G3AD Description G306A to M-VIEW Touch 7 Cutout Adapter G310S to M-VIEW Touch 10 Cutout Adapter G310S to M-VIEW Touch 12 Cutout Adapter Part Number 00034621 00034620 00034622 Existing Replacement G3 Unit M-VIEW Touch A B C D G306A MV-7T 8.83 7.08 7.06 4.89 G310S MV-10T 12.83 9.50 10.197 7.931 G310S MV-12T 12.83 9.50 11.458 7.561 In order to consistently bring you the highest quality, full-featured products, we reserve the right to change our specifications and designs at any time. FW MURPHY product names and the FW MURPHY logo are proprietary trademarks. This document, including textual matter and illustrations, is copyright protected with all rights reserved. (c) 2021 FW MURPHY. A copy of our typical warranty may be viewed or printed by going to www.fwmurphy.com/warranty.