FW MURPHY Manuals & User Guides

FW Murphy TCM Series 7 Inch and 10 Inch Display Installation Guide

August 19, 2025

FW Murphy TCM Series 7 Inch and 10 Inch Display Product Identification The product model can be identified from a decal on the back side. Model and Order Name Decal…

FW MURPHY CV14 Control Valve Owner’s Manual

September 19, 2024

FW MURPHY CV14 Control Valve Specifications Body: A216 WCC steel Packing Plug: A105 steel zinc plated Trim: Standard: 440C stainless ball / D2 tool steel seat Corrosive: 316 stainless ball…

FW MURPHY LM500-TF-ATEX Lube Level Maintainer Installation Guide

June 11, 2024

FW MURPHY LM500-TF-ATEX Lube Level Maintainer Warranty - A limited warranty on materials and workmanship is given with this FW Murphy product. A copy of the warranty may be viewed…

FW MURPHY 53702504 Excite Automation And Controls Instruction Manual

May 20, 2024

FW MURPHY 53702504 Excite Automation And Controls Product Information Specifications Dual- and tri-mode options available Automatically switches between cell carriers for best signal Tri-mode units can switch between cell and…

FW MURPHY BLSK1 Series Bilge Level Switch System Installation Guide

October 25, 2023

FW MURPHY BLSK1 Series Bilge Level Switch System Installation Guide Installation Instructions WARNING: Before beginning installation of this FW Murphy product: Disconnect ALL electrical power to the machine. Make sure…

FW MURPHY 00-02-0644 601 CD Ignition System Instruction Manual

October 2, 2023

sect. 40 00-02-0644 rev. 2015/04/07 00-02-0644 601 CD Ignition System 601 CD Ignition System Installation Instructions Preparation Before begining product installation: Read and follow all installation instructions. Disconnect all electrical…

FW MURPHY LR857 Lube Level Regulator Instructions

October 2, 2023

Installation of LR857 Level Regulator Model LR857  LR857 Lube Level Regulator sect. 15 00-02-0177 rev. 2022/04/14 Please read the following instructions and warnings before installation. Visually inspect the product for…

FW MURPHY RTDT Series RTD Transmitter Installation Guide

October 1, 2023

FW MURPHY RTDT Series RTD Transmitter Product Information Product Name: RTD Transmitter Model: RTDT Series Manufacturer: FW MURPHY Specifications Power Supply Voltage (Min): 24 VDC Resistive Load (Max): 550 ohm…

FW MURPHY TTD Display Head Configurable Fault Annunciator Instructions

October 1, 2023

FW MURPHY TTD Display Head Configurable Fault Annunciator Product Information The TTDTM Display Head (NEMA 4 Faceplate) is a configurable fault annunciator manufactured by FW MURPHY. It is designed to…

FW MURPHY TDXM-DC Temperature Scanner-Pyrometer Instructions

October 1, 2023

TDXM-DC Temperature Scanner-Pyrometer Instructions SEQUENCE OF OPERATIONS SP3 LATCH A special model of the TDXM-DC is available to latch one of the 3 digital outputs when a trip is detected.…

FW Murphy LM500/LM500-TF Lube Level Maintainer Installation Guide

Installation Guide

Comprehensive installation guide for the FW Murphy LM500 and LM500-TF Lube Level Maintainers. Covers product overview, warnings, operation, dimensions, mounting, hose connections, supply tank connection, kits, and specifications.

FW Murphy WellPro™ Controller: Installation and Operations Manual

Installation and Operations Manual

This comprehensive manual provides detailed installation, operation, and technical specifications for the FW Murphy WellPro™ Controller. It covers hazardous area operation, wiring, display navigation, and Modbus RTU communication for industrial…

Standard Centurion C5-1 Modbus Application Guide: Register Map and Technical Specification

Technical Specification

Comprehensive guide detailing the Modbus RTU holding registers for the Standard Centurion C5-1 controller. Covers register ranges, data structures, command explanations, and technical addenda for firmware 50-33-3920.

FW Murphy M-Link IoT Gateway Installation Manual

Installation Guide

Comprehensive installation manual for the FW Murphy M-Link IoT Gateway, covering product description, features, specifications, setup procedures, mounting instructions, wiring diagrams, and entity parameters. Designed for qualified technicians.

FW Murphy DVU Series Dump Valves: Installation, Operation, and Repair Manual

Installation and Operation Manual

Comprehensive guide for FW Murphy DVU Series pneumatic dump valves, covering installation, operation, specifications, dimensions, repair procedures, and ordering information for models DVU150, DVU175, DVU2105, DVU2115, and DVU2120.

FW Murphy M-Link Quick Start Guide: Installation and Setup

quick start guide

Concise guide for installing and setting up the FW Murphy M-Link IoT gateway. Includes connection details, app setup, and mounting instructions.

FW Murphy LS200 Series Liquid Level Switches: Installation and Operations Manual

Installation and Operations Manual

Comprehensive installation and operations manual for FW Murphy LS200, LS200N, and LS200NDVOR liquid level switches. Covers product information, certification, installation procedures for direct, weld collar, and external float chamber mounting,…

Installation Guide: FW Murphy Shock/Vibration Control Switches (VS2, VS2C, VS2EX, VS2EXR, VS2EXRB, VS94)

Installation Guide

Comprehensive installation guide for FW Murphy's VS2, VS2C, VS2EX, VS2EXR, VS2EXRB, and VS94 series shock and vibration control switches. Covers models, options, specifications, installation procedures, sensitivity adjustment, and electrical diagrams.

FW Murphy Centurion C5 Quick Start Guide: Installation and Setup

quick start guide

This guide provides essential information for installing and setting up the FW Murphy Centurion C5 controller and its associated M-VIEW display modules (MV-5-C, MV-7T, MV-10T), including optional MX4-R2 and MX5-R2…

IntelliSpark® Integral Coils Installation Instructions | FW Murphy

Installation Guide

Comprehensive installation guide for FW Murphy IntelliSpark® Integral Coils, detailing part numbers, mounting procedures, torque specifications, and crucial safety warnings for proper engine operation.

FW MURPHY G3AD Adapter Panels: G3 to M-VIEW Touch Installation Guide

Technical Specification

Detailed guide for installing FW MURPHY G3AD adapter panels, enabling the transition from G3 units to M-VIEW Touch HMIs. Features mounting instructions, panel dimensions, and ordering details for various models.

FW Murphy PD8100 Series Pulsation Dampener - Technical Specifications

Technical Specification

The FW Murphy PD8100 Series Pulsation Dampener effectively eliminates pointer flutter and reduces wear on pressure indicating instruments in industrial applications. This document details its specifications, dimensions, mounting, and ordering…