Kimo Si-ACC-BI320 Quick Start Guide

Product Identification

Model: Si-ACC-BI320

Brand: Kimo (a Sauermann brand)

Installation Guide

Step 1: Grommet Installation on Probe Cable

This section illustrates the installation of the grommet onto the probe cable. It shows configurations for attaching a grommet to a cable and connecting the cable to the instrument's body via a cable gland.

• Configuration 1 & 2: Show a cable with a grommet attached, detailing the grommet fitting.
• Configuration 3 & 4: Depict the instrument body with cable entry points. Figure 3 shows a cable being inserted into a connector, highlighting the grommet area. Figure 4 shows a similar view, emphasizing the cable gland connection.

Step 2: Using Clogged Grommet (When Cable is Not Used)

When the probe cable is not in use, replace the original grommet with a clogged grommet (labeled 'a'). Secure the cable gland with cable gland caps (labeled 'b') for proper sealing.

Step 3: Using Elbow Connectors

This section describes the use of elbow connectors for cable routing, showing a diagram of how they integrate with the instrument's connections.

Technical Dimensions

Dimensions in Millimeters (mm)

Main body dimensions: 234.00 mm (Length) x 68.00 mm (Width) x 56.50 mm (Depth).

Mounting hole pattern: Four M3 holes. Two on the top face (68.00 mm apart) and two on the bottom face (68.00 mm apart). The distance between the top and bottom mounting hole rows is 195.00 mm. The overall width for mounting is 76.00 mm.

Cable entry hole diameter: 17.00 mm.

Other key dimensions: 47.00 mm, 100.00 mm.

Dimensions in Inches (in)

Main body dimensions: 9.21 inches (Length) x 2.68 inches (Width) x 2.2 inches (Depth).

Mounting hole pattern: Four M3 holes. Two on the top face (2.68 inches apart) and two on the bottom face (2.68 inches apart). The distance between the top and bottom mounting hole rows is 7.68 inches. The overall width for mounting is 3.94 inches.

Cable entry hole diameter: 0.67 inches.

Other key dimensions: 2.99 inches.

Kit Contents

The kit includes the following components:

• Locknuts x3
• Cable glands x3
• Cable glands caps x3
• Elbow connectors x2
• Grommet x1
• Clogged grommet x1

Note: This list is also provided in French, Spanish, Italian, German, Portuguese, and Chinese.

Customer Support and Contact Information

For customer service and support, please visit the Customer Service Portal:

https://sauermann-en.custhelp.com

Company Address:

Sauermann Industrie
ZA Bernard Moulinet
24700 Montpon-Ménestérol - France

Contact Details:

Phone: +33 (0)5 53 80 85 00

Email: services@sauermanngroup.com

Recycling Information: This appliance, its accessories, and batteries are recyclable. Please dispose of them at designated collection points as indicated by the recycling symbols (e.g., 'À DÉPOSER EN MAGASIN', 'À DÉPOSER EN DÉCHÈTERIE').