Makita Cordless Pruning Saws
DUC150 (150 mm / 6") and UC100D (100 mm / 4")
Satisfy Professional's Needs
Lightweight yet easy-to-use
Makita cordless pruning saws are designed for efficiency and ease of use.
Key Features:
- Movable Guard: Covers the upper side of the guide bar and opens gradually wider as the saw chain cuts deeper into the branch.
Makita cordless pruning saw in action on a tree branch.
- Lock-off Lever: Accessible from both sides for enhanced safety and control.
Close-up of the pruning saw's dual-sided lock-off lever.
- BL Motor: Compact and lightweight Brushless DC motor for increased power and efficiency.
Makita BL motor component.
- eXtreme Protection Technology (XPT): Provides enhanced protection against dust and dripping water for operation in harsh conditions.
Makita XPT logo/symbol.
- Automatic Chain Lubrication: Minimizes the chance that the saw chain will stall due to forgetting to supply chain oil. Features an oil tank cap and chain oil view window.
Diagram illustrating the automatic chain lubrication system.
- New Tool-less Chain Adjustment: Simply loosen and re-tighten the lever to automatically adjust the tension of the saw chain. This easy-to-operate large lever is designed to be pulled up and turned easily.
Demonstration of the tool-less saw chain change and tension adjustment mechanism.
- Rear Hand Guard: For added safety during operation.
Specifications
| Feature | DUC150 | UC100D |
|---|---|---|
| Saw chain type | 80TXL | 80TXL |
| Gauge | 1.1 mm (0.043") | 1.1 mm (0.043") |
| Pitch | 0.325" | 0.325" |
| Number of links | 32 | 26 |
| Guide bar length | 150 mm (6") | 100 mm (4") |
| Max cutting length | 161 mm | 111 mm |
| Chain speed | 8.0 m/s (480 m/min) (1,570 FPM) | 8.0 m/s (480 m/min) (1,570 FPM) |
| Chain oil tank volume | 55 mL (1.9 USoz) | 55 mL (1.9 USoz) |
| Vibration level (Cutting wood) | 4.8 m/s² | 4.8 m/s² |
| Dimensions (L x W x H) w/o Battery | 408 x 90 x 232 mm (16 x 3-1/2 x 9-1/8") | 350 x 90 x 215 mm (13-3/4 x 3-1/2 x 8-1/2") |
| Dimensions (L x W x H) w/ Battery | w/ BL1815N/BL1820B: 445 x 90 x 245 mm (17-1/2 x 3-1/2 x 9-5/8") w/ BL1830B/BL1840B/BL1850B/BL1860B: 459 x 90 x 249 mm (18 x 3-1/2 x 9-3/4") | w/ BL1016/BL1021B: 383 x 90 x 220 mm (15-1/8 x 3-1/2 x 8-5/8") w/ BL1041B: 398 x 90 x 226 mm (15-5/8 x 3-1/2 x 8-7/8") |
| Net weight* | 1.7-2.0 kg (3.7-4.4 lbs.) | 1.5-1.6 kg (3.3-3.5 lbs.) |
*The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest combination, according to EPTA-Procedure 01/2014, are shown in the table.
Accessories
- File holder set: 4.0 mm (5/32")
Image of the file holder set.
- Chain oil: 100mL (country-specific)
Part no. 182229-1
- Guide bar:
- For DUC150: 1912F1-4
- For UC100D: 1910W0-3
- Saw chain:
- For DUC150: 1912E8-3
- For UC100D: 1910V6-4
- Holster set: For storage and carrying of the machine. For both 100mm/150mm models.
Part no. 1913K4-9
Charging Time
Charging times for various Makita batteries and chargers.
| Battery | Charger | Charging Time (Approx.) |
|---|---|---|
| BL1815N 1.5Ah (196449-1) | DC18RC | 15 min |
| DC18SD | 30 min | |
| BL1820B 2.0Ah (197254-9) | DC18RC | 24 min |
| DC18SD | 45 min | |
| BL1830B 3.0Ah (197599-5) | DC18RC | 22 min |
| DC18SD | 60 min | |
| BL1850B 5.0Ah (197280-8) | DC18RC | 45 min |
| DC18SD | 110 min | |
| BL1860B 6.0Ah (197422-4) | DC18RC | 55 min |
| DC18SD | 130 min | |
| BL1016 1.5Ah (197393-5) | DC10SB | 22 min |
| DC10WD | 50 min | |
| BL1021B 2.0Ah (197396-9) | DC10SB | 30 min |
| DC10WD | 70 min | |
| BL1041B 4.0Ah (197406-2) | DC10SB | 60 min |
| DC10WD | 130 min |
Work Amount
Test conditions: Cut Ø50 cedar rod under an optimal pressing load of 20N or less on cutting edge. Saw chain: 80TXL.
| Model | Battery | Number of Cuts |
|---|---|---|
| DUC150 | BL1830B (3.0Ah) | 210 pcs. |
| UC100D | BL1021B (2.0Ah) | 73 pcs. |
Standard Equipment
- Saw chain
- Guide bar
- Guide bar case
- Round file set (country-specific)
- Chain oil (country-specific)
- Battery
- Charger
Items of standard equipment and specifications may vary by country or area.
Home - Makita
