Zyxel GS1900 Series V2.40(AAxx.0)C0 Release Note
Date: This document describes the features in the GS1900 series product for its 2.40(AAxx.0)C0 release.
Support Platforms:
- Zyxel GS1900-8
- Zyxel GS1900-8HP
- Zyxel GS1900-8HP (Rev. B1)
- Zyxel GS1900-10HP
- Zyxel GS1900-16
- Zyxel GS1900-24E
- Zyxel GS1900-24
- Zyxel GS1900-24HP
- Zyxel GS1900-48
- Zyxel GS1900-48HP
Version:
System Version
- V2.40(AAHH.0) | 11/07/2017
- V2.40(AAHI.0) | 11/07/2017
- V2.40(AAZI.0) | 11/07/2017
- V2.40(AAHJ.0) | 11/07/2017
- V2.40(AAHK.0) | 11/07/2017
- V2.40(AAHL.0) | 11/07/2017
- V2.40(AAHM.0) | 11/07/2017
- V2.40(AAHN.0) | 11/07/2017
- V2.40(AAHO.0) | 11/07/2017
Boot Version
- V2.00 | 07/08/2015
Read Me First:
GS1900-8HP Rev. B1 and GS1900-10HP only can support firmware V2.10(AAxx.0)C0 or above version.
Enhanced Features:
V2.40(AAxx.0)C0:
- [PoE] PoE default mode changes from Classification mode to Consumption mode.
- eITS#170200226 [Time Range] Time range groups for PoE scheduling.
- [Voice VLAN] Voice VLAN behavior enhancement (It can process the untagged packets from IP phone).
- [Web GUI] Brand 2.0 GUI.
- [SNMP] Firmware upgrade via SNMP.
V2.30(AAxx.0)C0:
- eITS#161000855 [Time] Modify Daylight Savings Time configuration for "Week" from [1,2,3,4,5] to [1,2,3,4, Last].
V2.20(AAxx.1)C0:
- N/A
Bug Fixed:
V2.40(AAxx.0)C0:
- eITS#170500544 [DHCP] Change management VLAN does not trigger device's DHCP client to renew IP address.
- eITS#170100069 [VLAN] VLAN 1's name cannot be saved after rebooting.
- [SNMP] When using SNMPC tool to reboot switch will pop-up error message, but switch will reboot successful.
- eITS#170600306 [Web GUI] The switch automatically redirects the IPv6 page to IPv4 after IPv6 session time-out.
- eITS#170700123 [IPv6] The switch automatically redirects the Link-local IPv6 address to global IPv6 address after session time-out.
- eITS#170700205 [Management] User may download the running configuration with a particular method without authentication.
- eITS#170900867 [Time Range] The "Time Range" can neither be edited nor be deleted if the user set the Time Range Name with "space".
- eITS#170900256 [SNMP] When polling some particular SNMP OID that may causes device in high memory usage and loss of the management.
- eITS#171000804 [IGMP] GS1900-8HP/24E does not send specific IGMPv3 report across uplink port.
- [Web UI] Login page's system name characters will over the border when system name is set to 64 characters.
V2.30(AAxx.0)C0:
- eITS#161000065 [STP] Spanning Tree Forward Delay parameter reverts back to 15 seconds after saving and rebooting the switch.
- eITS#161000488 [GUI] Mozilla Firefox version 49.0.1 cannot view some characters in GS1900 web GUI.
- eITS#161000852 [NTP] GS1900 cannot sync with time server if time server is configured using DNS.
- eITS#161000847 [LAG] LACP cannot work with the accept frame type as "tagged only".
- [SNMP] Sometimes set name will failure via SNMP.
- [LLDP] When receive the too long LLDP-MED Hardware version packets will cause switch hang up.
V2.20(AAxx.1)C0:
- [PoE] Switch PoE LED button is abnormal.
V2.20(AAxx.0)C0:
- eITS#160400893 [System] Syslog time stamp inconsistent with system time.
- eITS#160301255 [LAG] LACP does not timeout in 3 seconds when using LACP “1 second" interval.
- eITS#160401062 [Config] Cannot remove the port of link aggregation from Web Wizard.
- eITS#160600848 [Port Security] Configure “Max MAC Entry Number" to "0" and it changes to “1” automatically after reboot.
- eITS#160200029 [LAG] Sometimes LACP trunk will fail for 4 minutes.
- [Vulnerability] Fix for CVE-2016-0800.
Known Issue:
- [Logging] If user tries to restore an illegal configuration (unofficial), login will always show authentication fail.
- [WebUI] System name display incorrect when using the special characters.
- [WebUI] Some pages cannot display correct when IE 8 enable "Compatibility View Settings". [Workaround] Upgrade IE browser to the latest version or disable "Compatibility View Settings."
Limitations:
- 802.1s instances : 16
- Guest VLAN : 1
- Static MAC entries : 64
- The BWM works well with UDP only.
Change History:
- V2.40(AAxx.0) | 11/07/2016
- V2.30(AAxx.0) | 12/14/2016
- V2.20(AAxx.1) | 09/02/2016
- V2.20(AAxx.0) | 06/23/2016
- V2.10(AAxx.0) | 09/10/2015
- V2.00(AAxx.2) | 02/09/2015
- V2.00(AAxx.1) | 10/20/2014
- V2.00(AAxx.0) | 06/25/2014
- V1.00(AAxx.0) | 07/24/2013