BrosTrend Dual Band USB Wi-Fi Adapter Quick Installation Guide

Introduction

Thank you for choosing the BrosTrend Wi-Fi adapter. This guide provides step-by-step instructions for installing your adapter. If you need assistance, please contact us via email at support@brostrend.com.

Your product review and feedback are important to us. Please consider leaving a comment by clicking on your order. If you encounter any problems, please contact us by email before leaving a review.

Installation for Windows

Step 1: Connect to a Computer

Connect the BrosTrend Wi-Fi adapter to a USB port on your desktop or laptop computer.

[Image: BrosTrend Wi-Fi adapter connected to a laptop's USB port.]

Step 2: Install Driver

To obtain the driver, you can:

• Run the included CD. [Image: Computer CD drive with disc.]
• Visit https://brostrend.me/driver to download the latest driver.
• Send an email to support@brostrend.com.

Once you have the driver files, locate the driver folder for Windows and click the Setup.exe icon to start the installation. [Image: Windows folder with Setup.exe file highlighted.] Follow the on-screen instructions to complete the installation. Restart your PC when finished.

Step 3: Join a Wireless Network

On your desktop, click the Wi-Fi icon [Wi-Fi Network Icon] to select your wireless network and enter the correct Wi-Fi Key to connect.

[Image: Windows system tray showing Wi-Fi icon and network selection prompt.]

Installation for MAC OS X

Step 1: Connect to your MAC

Connect the BrosTrend Wi-Fi adapter to a USB port on your Mac computer.

[Image: BrosTrend Wi-Fi adapter connected to a Mac's USB port.]

Step 2: Install Driver

Download the driver from https://brostrend.me/driver or send an email to support@brostrend.com to get the latest driver.

Unzip the driver file. Click the driver icon [Executable Driver Icon] to start the installation. Follow the on-screen instructions to finish the installation. Restart your Mac after the installation is complete.

[Image: Screenshot of a zipped driver file and an executable icon.]

Step 3: Join a Wireless Network

3.1 Click the icon [Turn Wi-Fi Off Button] to turn off the Wi-Fi adapter integrated into your Mac.

[Image: macOS menu bar showing Wi-Fi status and a "Turn Wi-Fi Off" option.]

3.2 On your desktop, click the Wi-Fi icon [Wi-Fi Network Scan Icon] to scan for your wireless network. Enter the correct Wi-Fi Key to connect to your wireless network.

[Image: macOS Wi-Fi network selection interface showing available networks and password prompt.]

FCC Compliance Information

FCC Radiation Exposure Statement

This device meets the government's requirements for exposure to radio waves. The guidelines are based on standards developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The SAR limit of USA (FCC) is 1.6 W/kg averaged. Device types: USB Wi-Fi Adapter (FCC ID: 2AZES-AC5L) has also been tested against this SAR limit. SAR information on this and other pad can be viewed online at http://www.fcc.gov/oet/ea/fccid/. Please use the device FCC ID number for search. This device was tested simulation typical 5mm to body. To maintain compliance with FCC RF exposure requirements, use accessories should maintain a separation distance between the user's bodies mentioned above, the use accessories should not contain metallic components in its assembly, the use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.