MAULsolid Mobile Information Board Assembly Instructions
This document provides instructions for assembling the MAULsolid Mobile Information Board.
Product Information
Product Name: Moderationstafel MAULsolid / Mobile Information Board, MAULsolid
Model Numbers: 636 52, 636 54, 636 56, 636 58, 636 59, 636 60
Brand: MAUL
Parts List
- 1 x Moderationstafel MAULsolid (Mobile Information Board)
- 2 x Support Rods
- 2 x Base Rods
- 2 x M6 x 20 Screws
- 2 x Ø 6.4 Washers
- 2 x Ø 6.4 Washers
- 4 x M5 x 35 Screws
- 4 x PC Ø 5.3 Washers
- 2 x Casters
- 2 x Casters
- 1 x Allen Key
- 1 x Wrench
Assembly Steps
The assembly involves attaching the support rods and base rods to the main board, and then fitting the casters to the base rods.
Step 1: Attach Support Rods
Connect the two support rods (labeled '2' in the diagram) to the sides of the main information board (labeled '1'). Use screws (labeled '7') and washers (labeled '8' and '6') as shown in the detailed view.
Step 2: Attach Base Rods
Attach the two base rods (labeled '3' in the diagram) to the bottom of the support rods. Secure them using the M6 x 20 screws (labeled '4') and Ø 6.4 washers (labeled '5').
Step 3: Attach Casters
Screw the casters (labeled '10') into the designated holes on the ends of the base rods (labeled '3').
Step 4: Final Check
Ensure all screws are tightened and the board is stable.
Additional Information
Packaging and Disposal Instructions: Please refer to the included notices for packaging and disposal information. [♻️] [?️]
Guarantee Information: For guarantee details, please refer to the provided information. [ℹ️]
Tools Required
- Allen Key (included) [?]
- Wrench (included) [?]
Disposal Information
Instructions for packaging and disposal are provided in multiple languages. [?]