VTech Pan & Tilt Video Monitor
User Manual
Important Safety Instructions
Read and save these instructions. Follow all warnings and instructions.
- WARNING: Strangulation Hazard. Cords may become a strangulation hazard. Keep this cord more than 3 feet (0.9 m) away from the crib and bassinet.
- This product is not a substitute for adult supervision.
- Do not use the product if any part is damaged or defective.
- Ensure the baby unit and AC adapter are placed on a flat, stable surface or mounted securely.
- Do not place the baby unit or cords in or near the crib or bassinet.
- Keep the baby unit and AC adapter away from water and heat sources.
- Use only the AC adapters supplied with the product.
- Do not overload wall outlets.
- Ensure the AC adapter is inserted correctly into the wall outlet.
- Do not touch the pins of the AC adapter.
- This product is intended for indoor use only.
- The baby unit should be placed at least 3 feet (0.9 m) away from the baby.
- Do not expose the product to extreme temperatures or humidity.
- Do not disassemble the product.
Getting Started
This section guides you through the initial setup of your VTech Pan & Tilt Video Monitor.
Components:
- Baby Unit (Camera)
- Parent Unit (Monitor)
- AC Adapter for Baby Unit
- AC Adapter for Parent Unit
- Rechargeable Battery for Parent Unit
Connecting the Baby Unit:
1. Connect the AC adapter to the Baby Unit. [?]
2. Plug the AC adapter into a wall outlet. [?]
Diagram Description: Shows the small end of the AC adapter plugged into the power port on the back of the Baby Unit, and the other end plugged into a wall socket.
Charging the Parent Unit:
1. Connect the AC adapter to the Parent Unit. [?]
2. Plug the AC adapter into a wall outlet. [?]
3. The Parent Unit will begin charging. The battery indicator will show the charging status. [?]
Diagram Description: Shows the AC adapter plugged into the power port on the back of the Parent Unit, and the other end plugged into a wall socket. The Parent Unit screen is visible, indicating charging.
Connecting the Camera and Charging the Parent Unit
This section details the initial connection and charging process.
Connecting the Baby Unit (Camera):
1. Locate the power port on the back of the Baby Unit.
2. Connect the small end of the supplied AC adapter to the power port.
3. Plug the AC adapter into a standard wall outlet.
Diagram Description: A close-up view of the Baby Unit's rear, showing the power port and the AC adapter being connected.
Charging the Parent Unit:
1. Locate the power port on the bottom of the Parent Unit.
2. Connect the small end of the supplied AC adapter to the power port.
3. Plug the AC adapter into a standard wall outlet.
4. The Parent Unit will begin charging. The battery icon on the screen will indicate charging status. It is recommended to fully charge the Parent Unit before first use.
Diagram Description: A view of the Parent Unit, showing the AC adapter connected to its power port and plugged into a wall outlet. The screen displays a charging battery icon.
Connecting to a Wi-Fi Network and Security
To enable remote viewing and advanced features, connect your monitor to your home Wi-Fi network.
1. Ensure your Parent Unit is powered on and charged.
2. Navigate to the settings menu on the Parent Unit.
3. Select 'Wi-Fi Setup' or a similar option.
4. Choose your home Wi-Fi network from the list and enter your Wi-Fi password.
5. The monitor will attempt to connect. A confirmation message will appear upon successful connection. [?]
Diagram Description: Shows the Parent Unit screen displaying a list of available Wi-Fi networks, with an option to select a network and enter a password.
Security: For enhanced security, use a strong password for your Wi-Fi network. The monitor supports WPA2 encryption.
Limited Warranty
VTech Telecommunications Ltd. warrants this product against defects in material and workmanship under normal use and service from the date of original purchase. This warranty is valid for one year from the date of purchase. VTech will, at its option, repair or replace the defective product free of charge. This warranty does not cover damage caused by misuse, accident, shipping, or any other cause not arising out of a defect in material and workmanship. Proof of purchase is required for warranty service. To obtain warranty service, please contact VTech Customer Support.
Download the VTech Smart Home App
Enhance your monitoring experience by downloading the VTech Smart Home App on your smartphone or tablet.
The app allows you to view your baby unit remotely, receive alerts, and access additional features.
To download the app:
- Search for "VTech Smart Home" in the Apple App Store or Google Play Store.
- Alternatively, scan the QR codes provided (if available) to go directly to the app store. [?]
- Follow the on-screen instructions to install and set up the app.
- Pair the app with your video monitor by following the in-app instructions.
Diagram Description: Icons representing Apple App Store and Google Play Store, indicating where to download the VTech Smart Home App.
Auto Software and Firmware Updates
Your VTech monitor can automatically update its software and firmware to ensure you have the latest features and security enhancements.
Enabling Updates:
1. Go to Settings on your Parent Unit.
2. Select 'Software Update' or 'Firmware Update'.
3. Choose 'Automatic Updates' and enable the feature. [⚙️]
Diagram Description: Shows the Parent Unit settings menu with an option for software updates, and a toggle switch to enable automatic updates.
Note: Ensure your monitor is connected to your Wi-Fi network for automatic updates to function.
Set Up the Video Monitor
Proper placement of the Baby Unit is crucial for optimal performance.
- Place the Baby Unit on a flat surface such as a shelf or table.
- Alternatively, use the included mounting kit to attach the Baby Unit to a wall.
- Ensure the Baby Unit is positioned so that it has a clear view of the baby.
- The recommended distance between the Baby Unit and the baby is at least 3 feet (0.9 meters) to prevent accidental strangulation from cords.
- Adjust the camera angle to get the best view.
Diagram Description: Illustrates different placement options for the Baby Unit: on a shelf, on a table, and mounted on a wall. Arrows indicate how to adjust the camera angle.
Using the Video Monitor
Your VTech Pan & Tilt Video Monitor is designed for easy operation.
Parent Unit Controls:
- Screen: Displays video feed from the Baby Unit.
- Pan/Tilt Buttons: Allows you to remotely move the camera up, down, left, and right. [⬆️ ⬇️ ⬅️ ➡️]
- Volume Buttons: Adjusts the audio volume of the Parent Unit. [? ?]
- Menu Button: Accesses settings and other features. [☰]
- Talk Button: Press and hold to speak to the baby through the Baby Unit's speaker. [?]
Diagram Description: A labeled diagram of the Parent Unit, highlighting the screen, pan/tilt controls, volume buttons, menu button, and talk button.
Mounting the Camera
For optimal viewing angles, you may choose to mount the Baby Unit.
Wall Mounting:
- Use the provided mounting bracket and screws.
- Position the bracket on the wall at the desired height and mark the screw holes.
- Drill holes and insert wall anchors if necessary.
- Secure the mounting bracket to the wall.
- Attach the Baby Unit to the bracket.
- Feed the power cord safely along the wall and secure it using the provided cord clips. Ensure the cord is out of reach of the baby.
Diagram Description: Shows the steps for wall mounting the Baby Unit, including attaching the bracket, securing the unit, and routing the power cord.
General Properties
- Pan & Tilt functionality for remote camera control.
- High-definition video streaming.
- Two-way talk function.
- Infrared night vision for clear viewing in low light.
- Temperature sensor.
- Secure, encrypted transmission.
- Expandable up to 4 cameras (sold separately).
Parent Unit Overview
The Parent Unit is your central control and viewing device.
- LCD Screen: Displays video feed, status icons, and menus.
- Speaker: Outputs audio from the Baby Unit and allows two-way talk.
- Microphone: Captures your voice for the two-way talk feature.
- Power Button: Turns the Parent Unit on/off. [▶️]
- Navigation Buttons: Used to move through menus and adjust settings.
- Talk Button: Used for two-way communication. [?]
- Volume Up/Down Buttons: Adjusts the Parent Unit's speaker volume. [? ?]
- Menu/Select Button: Accesses the main menu and confirms selections. [☰]
- Camera Pan/Tilt Buttons: Remotely controls the Baby Unit's camera direction. [⬆️ ⬇️ ⬅️ ➡️]
- Battery Compartment: Located on the back for the rechargeable battery.
- DC Power Port: For connecting the AC adapter.
Diagram Description: A detailed illustration of the Parent Unit with each component clearly labeled.
Baby Unit Overview
The Baby Unit is the camera and microphone component placed in the baby's room.
- Camera Lens: Captures video of the baby.
- Infrared LEDs: Provide night vision capabilities.
- Microphone: Captures audio from the baby's room.
- Speaker: Outputs audio from the Parent Unit during two-way talk.
- Status LED: Indicates power and connection status.
- Pairing Button: Used to pair the Baby Unit with the Parent Unit.
- DC Power Port: For connecting the AC adapter.
- Temperature Sensor: Monitors room temperature.
Diagram Description: An illustration of the Baby Unit, with its camera lens, infrared LEDs, microphone, speaker, status LED, pairing button, and power port labeled.
Troubleshooting
If you encounter issues, try the following solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound or poor sound quality | Volume too low on Parent Unit; Baby Unit speaker blocked. | Increase volume on Parent Unit; ensure Baby Unit speaker is clear. |
| No video or poor video quality | Baby Unit not powered on; weak Wi-Fi signal; camera lens dirty. | Ensure Baby Unit is powered and connected; move router closer or use Wi-Fi extender; clean camera lens with a soft cloth. |
| Parent Unit not charging | AC adapter not properly connected; faulty adapter or outlet. | Ensure AC adapter is securely plugged into both units and the outlet; try a different outlet; check adapter for damage. |
| Monitor not connecting to Wi-Fi | Incorrect Wi-Fi password; router issue; monitor too far from router. | Re-enter Wi-Fi password carefully; restart router; move monitor closer to router. |
| Baby Unit not pairing | Pairing mode not active; interference. | Follow pairing instructions carefully; ensure no other devices are interfering. |
To the Local Authorities
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
For detailed FCC, IC, and CE information, please refer to the full user manual or the product packaging.
FCC/IC/CE Information
This section contains regulatory compliance information for various regions.
FCC Compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
IC Compliance: This device complies with Industry Canada licence-exempt RSS standard(s).
CE Compliance: This product conforms to the essential requirements of the relevant European health, safety and environmental protection legislation.
Diagram Description: Icons representing FCC, IC, and CE certifications.
