VTech DM215-2 Audio Baby Monitor User Manual

Important Safety Instructions

Read all instructions before using the baby monitor. Keep the manual for future reference.

• WARNING: CHOKING HAZARD - Small parts. This product is not a toy.
• WARNING: STRANGULATION HAZARD - Cords can be a strangulation hazard. Keep cords more than 3 feet (0.9 m) away from the crib.
• This baby monitor is intended as an aid. It is not a substitute for responsible adult supervision.
• This product should not be used by children without adult supervision.
• Install and use the monitor with care.
• Ensure the baby unit is placed at a distance from the baby, not in the crib.
• Electrical Safety:
• Use only the power adapters supplied with this product.
• Do not use the product if the power cord or plug is damaged.
• All appliances should be situated a safe distance from the baby unit.
• Do not use the product near water.
• Do not disassemble the product.
• Radio Frequency Interference:
• This product may be subject to interference from other electronic devices.
• Keep electrical appliances such as microwaves, cordless phones, and computers away from the baby unit.
• Care and Maintenance:
• Clean the product with a soft, dry cloth.
• Do not use liquids or aerosol cleaners.
• Do not expose the product to extreme temperatures.

What's In The Box

Diagram illustrating the contents of the box: Parent Unit, Baby Unit, 2x Power adapters, 1x Rechargeable battery for parent unit, 1x User Manual.

• Parent Unit
• Baby Unit
• 2 x Power Adapters
• 1 x Rechargeable Battery for Parent Unit
• 1 x User Manual

Power On Or Off The Baby Unit

Diagram showing the side of the baby unit with the power button highlighted, indicating how to turn it on and off.

To turn the baby unit ON: Press and hold the power button on the side of the baby unit until the power LED lights up.

To turn the baby unit OFF: Press and hold the power button on the side of the baby unit until the power LED turns off.

Install The Parent Unit Batteries

Diagram showing the back of the parent unit with a battery compartment cover being removed, indicating where to insert the rechargeable battery.

The parent unit uses a rechargeable battery pack (included) for portability. It can also be powered by AC adapter.

1. Remove the battery compartment cover from the back of the parent unit.
2. Install the rechargeable battery pack, ensuring correct orientation.
3. Replace the battery compartment cover.
4. Connect the AC adapter to the parent unit and a power outlet.

The battery icon on the parent unit display indicates the battery status.

Install The Baby Unit Batteries

Diagram showing the back of the baby unit with a battery compartment cover being removed, indicating where to insert AAA alkaline batteries.

The baby unit can operate on AC power or use 2 AAA alkaline batteries (not included) for backup power.

1. Remove the battery compartment cover from the back of the baby unit.
2. Insert 2 AAA alkaline batteries, observing correct polarity.
3. Replace the battery compartment cover.

Connect The Baby Monitor

Diagram showing the parent unit and baby unit, with arrows indicating they should be placed within range and powered on to connect.

Ensure both parent and baby units are powered on. The units will automatically connect. A link indicator on the parent unit confirms the connection.

If the connection is lost, ensure both units are within range and powered on. Refer to the troubleshooting section if issues persist.

Status Check

Diagram showing the parent unit with indicators for power, link, and sound. It illustrates checking the status lights.

The parent unit display shows the status of the connection, sound detection, and battery level.

• Power LED: Indicates the unit is powered on.
• Link LED: Indicates a stable connection with the baby unit.
• Sound LED: Lights up or flashes when sound is detected by the baby unit.
• Battery Indicator: Shows the remaining battery life of the parent unit.

Basic Operation - Parent Unit

Diagram showing the parent unit's buttons: Menu, Volume Up, Volume Down, Talk, Link, and Reset. It also shows the LCD screen with icons for sound, link, battery, and temperature.

Using The Menu

Press the MENU button to access settings:

• Sound: Adjust sound sensitivity and volume.
• Lullaby: Select and play lullabies.
• Settings: Adjust display brightness, language, and other preferences.
• Volume: Adjust parent unit speaker volume.

Adjusting Volume

Press the VOLUME UP or VOLUME DOWN buttons to adjust the parent unit speaker volume.

Sound Sensitivity

Access the 'Sound' menu to adjust the sensitivity of the baby unit's microphone. Higher sensitivity detects quieter sounds.

Talk Function

Press and hold the TALK button to speak to the baby unit. Release to hear the baby unit.

Link Button

Press the LINK button to re-establish connection if lost, or to check signal strength.

Reset Button

Press the RESET button to restart the parent unit.

Basic Operation - Baby Unit

Diagram showing the baby unit's buttons: Volume Up, Volume Down, and Power. It also shows the night light and speaker.

Volume Control

Use the VOLUME UP and VOLUME DOWN buttons on the baby unit to adjust the volume of the parent unit's speaker.

Night Light

Press the night light button on the baby unit to turn the night light ON or OFF.

Lullabies

Lullabies are controlled via the parent unit.

Set Up Alarm Timer

Diagram showing the parent unit's menu navigation for setting the alarm timer, with visual representations of the timer display and buttons.

Use the parent unit menu to set an alarm timer:

1. Press the MENU button.
2. Navigate to 'Settings' and select 'Alarm Timer'.
3. Use the UP/DOWN buttons to set the desired time.
4. Press MENU to confirm and save the timer. The timer will count down.
5. To cancel the timer, navigate to the timer setting and select 'Off' or press RESET.

Change Face Plate (Optional)

Diagram showing how to detach and attach the face plate on the baby unit.

The baby unit's decorative face plate can be changed.

Detach The Face Plate

1. Gently pull the face plate away from the baby unit.

Attach The Face Plate

1. Align the new face plate with the baby unit and press firmly until it clicks into place.

Overview - Baby Unit

Diagram of the baby unit with numbered callouts pointing to: Power button, Volume Up, Volume Down, Night light, Speaker, Microphone, Battery compartment.

1. Power Button: Turns the baby unit ON/OFF.
2. Volume Up Button: Increases parent unit volume.
3. Volume Down Button: Decreases parent unit volume.
4. Night Light Button: Turns the night light ON/OFF.
5. Speaker: Outputs sound from the parent unit.
6. Microphone: Captures sound to transmit to the parent unit.
7. Battery Compartment: Holds 2 AAA alkaline batteries for backup.

Overview - Parent Unit

Diagram of the parent unit with numbered callouts pointing to: LCD display, Volume Up, Volume Down, Talk button, Link button, Menu button, Reset button, Speaker, Microphone, Battery compartment cover, Power button, Night light button, Lullaby button.

1. LCD Display: Shows status, menu options, and alerts.
2. Volume Up Button: Increases parent unit speaker volume.
3. Volume Down Button: Decreases parent unit speaker volume.
4. Talk Button: Press and hold to speak to the baby unit.
5. Link Button: Re-establishes connection or checks signal.
6. Menu Button: Accesses settings and options.
7. Reset Button: Restarts the parent unit.
8. Speaker: Outputs sound from the baby unit.
9. Microphone: Captures sound for transmission to the parent unit (if applicable, though this is an audio monitor, so likely not for talking back).
10. Battery Compartment Cover: Located on the back, for the rechargeable battery.
11. Power Button: Turns the parent unit ON/OFF.
12. Night Light Button: Controls the baby unit's night light.
13. Lullaby Button: Selects and plays lullabies.

Menu Tree

Diagram illustrating the menu structure for the parent unit, showing navigation paths for sound, lullabies, settings, and volume.

The parent unit menu allows access to various functions:

• Main Menu:
• Sound:
• Adjust Volume (Parent Unit)
• Adjust Sensitivity (Baby Unit)
• Lullaby:
• Play Lullaby
• Stop Lullaby
• Select Lullaby
• Settings:
• Display Brightness
• Language
• Alarm Timer
• Factory Reset
• Volume:
• Adjust Volume (Parent Unit)

Parent Unit Screen Symbols

Diagram showing icons and their meanings on the parent unit's LCD screen: Signal Strength (linked/unlinked), Sound Detected (sound wave icon), Temperature (thermometer icon), Battery Status (battery icon), Night Light (moon icon).

• Signal Strength: Indicates connection status (e.g., bars for strong, weak, or no signal).
• Sound Detected: A sound wave icon appears when the baby unit detects sound.
• Temperature: Displays the ambient temperature detected by the baby unit.
• Battery Status: Shows the remaining battery life of the parent unit.
• Night Light: Indicates if the baby unit's night light is ON.

Sound Sensitivity and Alert

Diagram showing sliders and buttons on the parent unit for adjusting sound sensitivity and volume, with explanations for different levels.

Adjust Sound Sensitivity

Use the 'Sound' menu on the parent unit to adjust the sensitivity of the baby unit's microphone. This determines how quiet a sound must be to trigger an alert.

• Level 1 (Low): Detects only loud sounds.
• Level 2: Detects moderate sounds.
• Level 3 (High): Detects even quiet sounds.

The default setting is Level 2. You can test the sensitivity by speaking or making noise near the baby unit.

Adjust Volume

Use the VOLUME UP/DOWN buttons on the parent unit to adjust the speaker volume. The default volume is set to a moderate level.

Note: The parent unit volume and sound sensitivity are independent settings.

Lullaby

Diagram showing the parent unit interface for selecting and playing lullabies.

The VTech DM215-2 includes built-in lullabies to soothe your baby.

• Press the LULLABY button on the parent unit to access the lullaby menu.
• Select a lullaby using the UP/DOWN buttons and press MENU to play.
• Press LULLABY again to stop the lullaby.

Night Light

Diagram showing the parent unit interface for controlling the baby unit's night light.

The baby unit features a gentle night light.

• Press the NIGHT LIGHT button on the parent unit to turn the night light ON or OFF.
• The night light can also be controlled directly on the baby unit.

Need Help?

Diagram showing contact information and support website for VTech.

For support, FAQs, and troubleshooting, visit the VTech support website:

https://vtech.com/support

You can also contact VTech customer service for assistance.

The RRRC Seal

Diagram of the RRRC seal, indicating compliance with Radio Research and Telecommunications Commission.

This seal indicates that the product complies with the regulations of the Radio Research and Telecommunications Commission (RRRC).

For more information, visit https://www.rrrc.org.

For CE Compliance Only

This section contains compliance information relevant to European Union standards.

Limited Warranty

Diagram outlining the terms and conditions of the limited warranty.

VTech Telecommunications Ltd. warrants this product against defects in material and workmanship under normal use and service from the date of purchase.

How long does this limited warranty last?

This limited warranty lasts for one (1) year from the date of purchase.

What does this warranty not cover?

This warranty does not cover:

• Damage resulting from accident, misuse, abuse, neglect, or other external causes.
• Products operated outside the operating instructions or in an improper manner.
• Damage caused by service performed by anyone other than VTech.
• Products or parts that have been modified without VTech's written authorization.
• Consumables (such as batteries).
• Products sold AS IS or with all faults.

What will VTech do?

VTech will, at its option, repair or replace the defective product or parts. VTech reserves the right to use new or reconditioned parts.

What do you have to do?

To obtain warranty service, please contact VTech Customer Support at 1-800-595-9511 or visit https://vtech.com/warranty. You will need to provide proof of purchase.

What does this warranty not cover?

This warranty does not cover damage resulting from accident, misuse, abuse, neglect, improper installation, or operation outside the operating instructions. It also does not cover products or parts that have been modified or repaired by anyone other than VTech, or damage caused by normal wear and tear.

Storage

If the baby monitor will not be used for an extended period, remove the batteries from both units. Store the units in a cool, dry place.

Disclaimer And Limitation Of Liability

VTech Telecommunications Ltd. shall not be liable for any indirect, incidental, special, or consequential damages arising out of the use or inability to use this product. VTech's liability is limited to the purchase price of the product.

CALIFORNIA COMMISSION ENERGY CHARGING TEST MODE

This product is designed to comply with the California Energy Commission (CEC) regulations for battery charging systems. The product may enter a low-power mode when not in use to conserve energy.