T2 TWS Earbuds User Manual

Safety Instructions

• Listening at high volumes for extended periods can cause permanent hearing damage. Keep volume levels moderate to low for your safety.
• Do not use while driving, cycling, operating machinery, or performing other activities that require awareness of surrounding sounds.
• Do not use during thunderstorms; the earphones may not work properly and could increase the risk of being hit by lightning.
• Earphones may not work properly under high temperature or high humidity conditions. Do not use corrosive cleaners.
• If the earphones come into contact with liquids, wipe them away quickly.
• If submerged in water, do not turn the earphones on until completely dried. (Note: Liquid immersion voids the warranty.)
• Keep earphones and packaging out of reach of children.
• Please use the original charging cable provided by the manufacturer.

Product Scheme

1. Charging case

2. Charging case digital display

3. Press-sensitive multifunction key

4. Microphone

5. Sound release hole

6. Magnetic charging pin

Accessories

Inside each box:

• Charging case X 1
• Ear caps X 3
• USB cable X 1
• Manual X 1

Specifications

• Wireless version: 5.1
• Impedance: 32Ω
• Working Distance: > 10m
• Battery for earbud: 35mAh
• Battery charging case: 380mAh
• Music Play: 6h
• Calling: 3.5h
• Charging Time for charging case: 2h

Key Actions

• Next Song: Quick press the L/R multifunction key twice.
• Last Song: Quick press the L/R multifunction key twice.
• Pause/Play Music: Quick press the L/R multifunction key once in music mode. (Some mobile phones may require activating the music player first.)
• Answer/Hang Up Call: Quick press the L/R multifunction key once.
• Reject Call: Long press the L/R multifunction key for 1.5 seconds.
• Summon Siri: Long press the L/R multifunction key for 1.5 seconds.

Pairing

1. Power On: Take out earphones from the charging case and put them close to each other. TWS pairing will complete automatically. Turn on mobile phone Bluetooth, search for device name "T2", and single-click on "T2" to complete initial pairing.
2. Stereo Sound Usage: Take out both earphones from the charging box at the same time. Keep them within 10cm/33ft. L/R ear buds will start pairing automatically. Turn on mobile phone BT and search for "T2" device. Then, single-click on device name "T2" to complete pairing.
3. Mono Sound Usage: Keep one earbud in the charging case and close the case. It will disconnect and stop working automatically. The other earbud outside the case can work normally.

Charging

Earbuds Charging:

Place earbuds back into the charging box. The L/R indicator of the charging case's digital display will flash intermittently. The indicator will turn off after being fully charged.

Charging Case Charging:

While the digital display on the charging case shows figure 1, it means the charging case will run out of power soon. Please recharge it in time. Use a Type-C cable to charge the case fully.

Incoming Call

• Answer Call/End Call: Quick press the L/R multifunction key once.
• Reject Call: Long press on L/R multifunction key for 1.5 seconds.

FAQ

Q: Why can't the earbuds pair with my smartphones?

A: 1. Make sure the earbuds are fully charged and powered on. 2. Ensure the Bluetooth of your phone is turned on. 3. If the above points have no problem, put the earbuds back into the case, close the case, wait for 1 minute, then open the charging case and reconnect the earbuds with your phone.

Q: Why does the music stutter or cut out?

A: First, please ensure the distance between the earbuds and your phone is not more than 33 feet (without obstacles). If the distance is more than 33 feet, please note the following: 1. Ensure there is no obstacle between the earbuds and your phone. 2. Ensure there is no Microwave oven or transmitter around you, which may produce electromagnetic interference or cause signal interruption.

Q: Why do the earbuds not charge and not disconnect from my phone even when put into the case and closed?

A: Please make sure the charging case is not in low battery. If the charging case is in low battery, the earbuds cannot be charged and will not disconnect even if they are in the case. Please use a Type-C cable to charge the case fully.

FCC Statement

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.