Beijer Electronics
Innovations in industrial digital technology | EpendionInnovations in industrial digital technology | Ependion
Help online - tree view - Beijer Electronics
User Guide for Beijer models including: SUEN00406 Melsec iQ-R Ethernet to X2 Series Ethernet Communication, SUEN00406, Melsec iQ-R Ethernet to X2 Series Ethernet Communication
Quick Start Guide. MELSEC iQ-R Ethernet to X2 series. ... Please use the address support.europe@beijerelectronics.com for feedback about our Quick Start documents.
9 feb 2022 — Copyright © Beijer Electronics, 2021. This documentation (below referred to as 'the material') is the property of Beijer Electronics.
X2 pro 12 - Beijer Electronics
File Info : application/pdf, 8 Pages, 674.98KB
DocumentDocumentQuick Start Guide MELSEC iQ-R Ethernet to X2 series SUEN00406 Quick start Ethernet communication iQ-R Ethernet X2/BoX2 series SUEN00406 2021-10 1 Function and area of use This document explains how to set up an iQ-R over ethernet to communicate with X2/BoX2 over Ethernet using MC Protocol. 2 About this Startup document This Startup document should not be considered as a complete manual. It is an aid to be able to Startup a normal application quickly and easily. Copyright © Beijer Electronics, 2021 This documentation (below referred to as `the material') is the property of Beijer Electronics. The holder or user has a nonexclusive right to use the material. The holder is not allowed to distribute the material to anyone outside his/her organization except in cases where the material is part of a system that is supplied by the holder to his/her customer. The material may only be used with products or software supplied by Beijer Electronics. Beijer Electronics assumes no responsibility for any defects in the material, or for any consequences that might arise from the use of the material. It is the responsibility of the holder to ensure that any systems, for whatever applications, which is based on or includes the material (whether in its entirety or in parts), meets the expected properties or functional requirements. Beijer Electronics has no obligation to supply the holder with updated versions. Use the following hardware, software, drivers and utilities in order to obtain a stable application: In this document we have used following software and hardware · iX Developer 2.40 SP4 or later · X2/BoX2 series · GX Works 3 · iQ-R CPU For further information refer to · Beijer Electronics knowledge database, HelpOnline This document and other Startup documents can be obtained from our homepage. Please use the address support.europe@beijerelectronics.com for feedback about our Quick Start documents. Normal.dotm, 2020-09-09 2 (8) iQ-R Ethernet X2/BoX2 series SUEN00406 2021-10 3 Table of Contents 1 Function and area of use.........................................................................................2 2 About this Startup document....................................................................................2 3 Table of Contents..................................................................................................3 4 Setting in iQ-R Ethernet communication......................................................................4 5 Setting in X2/BoX2 Ethernet communication MC protocol .................................................5 Create a new project in iX Developer ...................................................................5 Driver settings (MC Protocol) .............................................................................7 6 About Beijer Electronics .........................................................................................8 Contact us ...................................................................................................8 Normal.dotm, 2020-09-09 3 (8) iQ-R Ethernet X2/BoX2 series SUEN00406 2021-10 4 Setting in GX Works3, iQ-R Ethernet communication The following chapter describes how to setup the Ethernet communication. All iQ-R (for example R04) has a built in ethernet port, Auto UDP 5005 is to be used. Som iQ-R models are also available in a R0xEN model with 3 ethernet ports. Port 2 and 3 are using the same Auto ports as older ethernet modules in the Q-series (QJ71E71-100, Auto UDP ports: 5000 and 5001, Auto TCP port: 5002). Recomemmded is to use UDP ports. To enable ports (not using Auto UDP/TCP port) a SLMP module needs to be used, enter port number and transport protocol. Port number 6000 (decimal) is used in this example, same port must be entered in iX Developer. 4 (8) Normal.dotm, 2020-09-09 iQ-R Ethernet X2/BoX2 series SUEN00406 2021-10 5 Setting in X2/BoX2 Ethernet communication MC protocol The following chapter describes how to setup the Ethernet communication in iX Developer using the MC Protocol driver. Create a new project in iX Developer Start iX Developer, select "Create New Project": Select target: Normal.dotm, 2020-09-09 5 (8) iQ-R Ethernet X2/BoX2 series Select MC Protocol: SUEN00406 2021-10 Type path and project name: Normal.dotm, 2020-09-09 6 (8) iQ-R Ethernet X2/BoX2 series Driver settings (MC Protocol) Double click on "Tags": Select "Controllers" - "Settings...": Select "TCP/IP" and "Hexadecimal": SUEN00406 2021-10 Type iQ-R IP address and port number configured in GX Works3: If Auto ports is used in GX Works3 use UDP port: 5000 / 5001 or Auto TCP port: 5002 Tip! Click on "Help" for driver description Press OK. 7 (8) Normal.dotm, 2020-09-09 iQ-R Ethernet X2/BoX2 series SUEN00406 2021-10 6 About Beijer Electronics Beijer Electronics is a multinational, cross-industry innovator that connects people and technologies to optimize processes for business-critical applications. Our offer includes operator communication, automation solutions, digitalization, display solutions and support. As experts in user-friendly software, hardware and services for the Industrial Internet of Things, we empower you to meet your challenges through leading-edge solutions. Beijer Electronics is a Beijer Group company. Beijer Group has a sale over 1.6 billion SEK in 2019 and is listed on the NASDAQ OMX Nordic Stockholm Small Cap list under the ticker BELE. www.beijergroup.com China Shanghai NORWAY Drammen TAIWAN Taipei DENMARK Roskilde SOUTH KOREA Seoul TURKEY Istanbul FRANCE Paris SWEDEN Göteborg Malmö Stockholm UNITED KINGDOM Nottingham GERMANY Nürtingen USA Salt Lake City Contact us Global offices and distributors !Optional details if one wants to add local contact information in the document! Local office Telephone E-mail Sweden +4640358600 info.se@beijerelectronics.com Normal.dotm, 2020-07-01 Beijer Electronics AB - a Beijer Electronics Group company Head Office Beijer Electronics AB P.O. Box 426, Stora Varvsgatan 13a SE-201 24 Malmö, SWEDEN Telephone +46 40 35 86 00 Subsidiaries Click here for details Reg no. 556701-4328 VAT no SE556701432801 www.beijerelectronics.com info@beijerelectronics.com 8 (8)