Sonoff SNZB-03 Zigbee Motion Sensor
Quick Start Guide V1.1
Introduction
The Sonoff SNZB-03 is a Zigbee motion sensor designed for smart home automation. It detects motion and can trigger other smart devices or send alerts via the eWeLink app when paired with a compatible Zigbee hub.
Package Contents
- SNZB-03 Zigbee Motion Sensor
- Battery
- Mounting Screws
- User Manual
Installation and Setup
Follow these steps to install and set up your SNZB-03 sensor:
Step 1: Prepare the Sensor
The sensor is powered by a battery. Ensure the battery is correctly inserted. The device is designed to be mounted on a wall or surface.
[Diagram 1 Description: Shows the SNZB-03 sensor with the battery compartment highlighted. Indicates where to insert the battery.]
Step 2: Open the Casing
To insert the battery or reset the device, you may need to open the sensor's casing. Use a small tool to gently pry open the cover.
[Diagram 2 Description: Illustrates how to open the SNZB-03 casing, showing a point for prying.]
Step 3: Pairing with the eWeLink App
To connect the SNZB-03 to your smart home system, you need to pair it with the eWeLink app via a Zigbee hub.
[Diagram 3 Description: Depicts the process of pairing the sensor with a smartphone via the eWeLink app, showing a phone screen with the app interface and the sensor. Includes visual cues for app download via QR codes.]
Download the eWeLink app from your smartphone's app store. QR codes are provided in the original documentation to find the app on Google Play or the App Store.
Device Pairing Instructions
Ensure your Zigbee hub is powered on and in pairing mode.
- Press and hold the reset button on the SNZB-03 sensor for approximately 5 seconds until the indicator LED flashes rapidly.
- The sensor will automatically connect to your Zigbee hub.
- Open the eWeLink app and tap the '+' icon to add a new device.
- Follow the on-screen instructions in the app to complete the pairing process.
Specifications
| Feature | Details |
|---|---|
| Material Name | SNZB-03 Quick Guide V1.1 |
| Material Process | 105g copper plate, four-color printing, accordion 9-fold page |
| Dimensions (Unfolded) | 360x80mm |
| Dimensions (Folded) | 40x80mm |
| Preparation Date | 2023.05.10 |
Safety and Compliance
Warnings:
- ⚠️ This device is for indoor use only.
- ⚠️ Keep away from water and moisture.
- ⚠️ Do not disassemble or modify the device.
Compliance:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
[FCC] [CE]
Battery Disposal:
Please dispose of used batteries responsibly according to local regulations. ♻️
About Sonoff
Sonoff is a brand specializing in smart home devices, offering a range of products for connected living.
