Behringer ULTRALINK MS8000 Ultra-Flexible 8-Channel Microphone Splitter

Introduction

The Behringer ULTRALINK MS8000 is an ultra-flexible 8-channel microphone splitter designed to create multiple copies of input signals or combine signals. This guide provides essential information for its setup and operation.

Important Safety Instructions

WARNING:

• Electrical Hazard: Do not open the cover. Terminals with this symbol carry sufficient current to constitute a risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-lock connectors. All installations or modifications must be carried out by qualified personnel.
• Hazardous Voltage: This symbol alerts you to the presence of uninsulated dangerous voltage inside the product, posing a risk of electric shock.
• Refer to Manual: This symbol alerts you to consult the accompanying important operating and servicing instructions. Read the manual.

CAUTION:

• To avoid electric shock, do not open the top cover (or rear panel). No user-serviceable parts inside. Refer servicing to qualified service personnel.
• To prevent fire or electric shock, do not expose this equipment to rain or moisture. This equipment should not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the equipment.
• Servicing instructions are for qualified service personnel only. To avoid electric shock, do not perform any servicing other than that contained in the operating instructions. All servicing must be performed by qualified service personnel.

General Precautions:

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments and accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. This apparatus must be connected to a mains socket outlet with a protective earth connection.
16. If the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
17. This product is suitable for use in altitudes up to 2000 meters, and in non-tropical climates only.

Connection Applications

The MS8000 can be used in two primary ways:

1. Creating Multiple Copies of Input Signals

Connect your microphones or other audio sources to the INPUT (IN) XLR connectors. The LINK OUT XLR connectors will provide a direct, transformer-isolated copy of the input signal, allowing you to send the signal to multiple destinations (e.g., a main mixer, a monitor mixer, or a recording device).

2. Combining Signals from Multiple Inputs

By using the LINK switches, you can combine signals from adjacent input channels to create a mixed output. For example, pressing the LINK switch for channels 1-2 will combine the signals from IN 1 and IN 2 into a single output available at the LINK OUT connectors for channels 1 and 2.

Caution: Be careful when using phantom power with linked channels. If phantom power is supplied to both linked channels' LINK OUT connectors, the current to the phantom-powered microphones or DI boxes might be too high.

Controls

The MS8000 features several key controls:

• (1) INPUT (IN) XLR Connectors: Accept audio signals from devices like microphones using balanced XLR cables. Phantom power from a mixer or preamp can pass through the LINK OUT XLR connectors and back through the XLR INPUT connectors to devices requiring phantom power.
• (2) LINK Switch: When pressed, pairs adjacent channels. This allows a single input signal to have two outputs or enables mixing two input signals into one combined output.
• (3) LIFT/GND Switch: When released (up), it disconnects the ground connection, reducing hum or noise from ground loops.
• (4) LINK OUT XLR Connectors: Provide a copy of the pre-transformer input signal for use with additional equipment. Phantom power from a mixer or preamp can be sent through the MS8000's LINK OUT connectors and back through the XLR INPUT connectors to microphones and other devices that may require phantom power.
• (5) OUT XLR Connectors: Send a copy of the post-transformer input signal to a mixer or other equipment. The transformer isolates phantom power present in the INPUT (IN) and LINK OUT XLR connectors.

Specifications

Other Important Information

1. Online Registration: Please register your Music Tribe product immediately after your purchase at www.musictribe.com. Registering your product using our simple online form helps us process your repair claims more quickly and efficiently. Read the terms and conditions of the warranty.
2. Product Malfunction: If your Music Tribe product does not operate as intended, we will assist you in getting it repaired as soon as possible. Contact the dealer from which you purchased the product. If your dealer is not a Music Tribe dealer, please contact the Music Tribe subsidiary or distributor nearest you. You can find their contact details in the "WHERE TO BUY" section of www.musictribe.com.
3. Power Connection: Before connecting the unit to the mains, ensure that you are using the correct mains voltage. If the fuse needs to be replaced, it must be replaced with an identical type and rating.

We Hear You