INSTALLATION
FULL OVERLAY
This section details the installation for full overlay hinges. The diagrams illustrate the placement on the side panel and door panel, along with key measurements.
Diagram Description: A side view shows a cabinet side panel and a door panel. The hinge mechanism is attached to both. Measurements indicate the thickness of the side panel and specific dimensions for hinge placement on the side panel (16mm from edges) and the door panel (16mm from edge, with a 4mm offset plus the thickness of the side panel).
Key Dimensions:
- Hinge plate width: 32mm
- Hole spacing on hinge plate: 16mm
- Distance from side panel edge to hinge: 16mm
- Distance from door panel edge to hinge: 16mm
- Offset on door panel: 4mm + thickness of the side panel
- Hole diameter: Ø4
HALF OVERLAY
This section outlines the installation for half overlay hinges. The diagrams show the hinge placement relative to the side and door panels.
Diagram Description: Similar to the full overlay, this diagram depicts the hinge mechanism on the side and door panels. Measurements are provided for precise installation.
Key Dimensions:
- Hinge plate width: 32mm
- Hole spacing on hinge plate: 16mm
- Distance from side panel edge to hinge: 16mm
- Distance from door panel edge to hinge: 16mm
- Offset on door panel: 4mm + 1/2 thickness of the side panel
- Hole diameter: Ø4
INSERT
This section covers the installation of insert hinges. The diagrams illustrate the mounting on the side and door panels.
Diagram Description: This diagram shows the hinge mechanism integrated into the door panel and attached to the side panel. Specific measurements are given for accurate fitting.
Key Dimensions:
- Hinge plate width: 32mm
- Hole spacing on hinge plate: 16mm
- Distance from side panel edge to hinge: 16mm
- Distance from door panel edge to hinge: 4mm
- Hole diameter: Ø4
