ShenZhen Huaxinwei Technology CO.,LTD

Change Record

Copyright Notice

All rights reserved by Shenzhen Huaxinwei Technology CO., LTD. No part of this document may be reproduced or transmitted without written consent.

Explanation

This specification applies to the CYD-008S, CYD-012S, and CYD-016S cabinet shared charging kits. Contents may be updated without prior notice. Statements and recommendations do not constitute warranties. Shenzhen Huaxinwei Technology CO., LTD. provides full technical support.

Catalogue

• 1. Summarize
• 2. Executive Standard
• 3. Main Components
• 4. Cabinet Basic Parameters
• 5. Basic Parameters of the Charger
• 6. Cell Safety Performance
• 7. Test Environment Conditions
• 8. Measuring Instruments and Testing Requirements
• 9. Finished Dimensions and Pictures
• 10. Packing Information
• 11. Warranty Period and Product Liability
• 12. Matters Need Attention

1. Summarize

This specification is for the CYD-008S, CYD-012S, and CYD-016S cabinet shared charging kits produced by Shenzhen Huaxinwei Technology CO., LTD. The product connects to a backend server via the internet for paid rental of charging treasures. It supports charging for mobile phones, tablets, and other devices via Apple Lightning, Micro USB, and Type-C interfaces (5V input).

2. Executive Standard

• Cabinet: GB 4943.1-2011 (Equipment security in information technology part I: General requirements)
• Charging Battery: GB/T 35590-2017 (General specification for mobile power supply for information technology portable digital devices)
• Battery Cell: GB 31241-2014 (Safety requirements for lithium ion batteries and battery packs for portable electronic products)
• Power Cord: GB 5023-1997 (Polyvinyl chloride insulated cables with rated voltage up to and including 450/750)
• Network: GSM/GPRS/EDGE 4G communication protocol

3. Main Components

• Shared charging cabinet (CYD-008S/012S/016S SOLIS GO Kiosk): 1 pc
• Power bank (SG024): 8, 12, or 16 pcs (depending on cabinet model)
• 4G traffic card (includes 30MB monthly 4G network traffic for 1 year): 1 pc
• Power cord: 1 pc
• Adapter: CYD-008S: DC 12V-5.0A (MAX); CYD-012S/016S: DC 12V-10.0A (MAX)

4. Cabinet Basic Parameters

• Mains Input: AC 220V ~ 50/60Hz, 1.3A
• Total Power Output: CYD-008S: DC 12V-5.0A (MAX); CYD-012S/016S: DC 12V-10.0A (MAX)
• Single Power Output: DC 5V-2.0A (MAX)
• USB Output: DC 5V-2.0A (MAX)
• Advertising Screen: 10.1 inches, DC 12V-0.3A (MAX)
• Power Cord Length: 1.2m
• Network Support: 4G network
• Operating Ambient Temperature: 0~50°C
• Working Environment Humidity: 25~75%
• Power Protection: Overcurrent protection, overvoltage protection, short circuit protection

5. Basic Parameters of the Charger

• Charging Input: DC 5V-2.0A (MAX)
• Terminal Stylus Charging Input: DC 5V-2.0A (MAX)
• Output (Lightning, Type-C): DC 5V-1.0A (MAX)
• Battery Specifications: 8000mAh
• Energy Conversion Efficiency: 80%
• Cell Cycle Life: No less than 85% for 300 cycles
• 0%-100% Charging Time: 4.5-5 hours
• Protection Functions: Over-temperature, over-charge, over-discharge, over-current, over-voltage, short circuit protection.
• Boot Output: Insert the corresponding interface into the phone, open the button to start output.

6. Cell Safety Performance

Intersection Detection: Standard charging cell fixed on a shaking table, vibrates along X, Y, Z axes for 30 minutes at 1.6mm amplitude and 10Hz~55Hz frequency (1Hz/min change). Requirement: No obvious damage, no breakage, leakage, smoke, or explosion.

Free Fall: After charging, cell is placed on hold for 0.5h-1h, then dropped from 1000mm height onto concrete slab. Tested in X, Y, Z positive and negative directions (six directions), one drop per direction. Requirement: No explosion, deflation, fire, leakage, or rupture. After the test, the mobile power supply shall work normally, and output voltage within ±5% Uout.

Constant Temperature and Humidity: Battery charged and placed in a 40°C±2°C, 90%-95% RH chamber for 48h, then at 20°C±5°C for 2h. Requirement: No deformation, corrosion, smoke, or explosion. Discharge time ≥ 45min.

Low-Temperature Property: Battery charged and placed in a -10°C±2°C chamber for 16h-24h, then discharged at 0.2C to 2.75V. Placed at 20°C±5°C for 2h. Requirement: No deformation, smoke, or explosion. Discharge time > 45min.

Flame Retardant Materials: Housing, printed board, and insulating materials must meet GB4943.1-2011 or GB 31241 flame retardant requirements (V-1 level). Burning time of cigarette butt shall not exceed 60s.

7. Test Environment Conditions

Unless otherwise specified, tests are conducted under standard atmospheric conditions: Temperature: 23°C ±2°C; Relative Humidity: 45%~75%; Atmospheric Pressure: 86 kPa~106 kPa.

8. Measuring Instruments and Testing Requirements

Voltage meter accuracy: Not less than 0.5 class. Internal resistance: Not less than 10 kΩ/V. Current meter accuracy: Not less than 0.5 level. Constant current load is adjustable within the power supply voltage range, with a current relative error of 0.1%.

9. Finished Dimensions and Pictures

Cabinet Dimensions: The charging cabinet is available in three models with dimensions:

• Model 1: Height 460mm, Width 252mm, Depth 205mm
• Model 2: Height 552mm, Width 252mm, Depth 205mm
• Model 3: Height 644mm, Width 252mm, Depth 205mm

Power Bank Dimensions: A schematic diagram of the power bank (SG024) is shown, indicating its portable nature and charging interfaces.

10. Packing Information

Cabinet Net Weight:

• CYD-008S: 3.90kg
• CYD-012S: 4.55kg
• CYD-016S: 5.73kg

Charge Treasure (Power Bank) Net Weight: 0.180kg

Carton Size:

• 290*250*500mm
• 290*250*600mm
• 290*250*700mm

Packing Diagram Description: Images show the contents of the shipping carton, including the power banks, cables, and adapters, packaged securely for transport.

11. Warranty Period and Product Liability

Warranty Period: Cabinet: 12 months from date of delivery. Charger: 6 months from date of delivery.

Product Liability: Shenzhen Huaxinwei Technology CO., LTD. is not responsible for accidents caused by failure to operate according to this specification.

12. Matters Need Attention

• Do not charge the battery with reverse polarity.
• Do not charge/discharge with current exceeding specified limits.
• Do not short-circuit the battery to prevent damage.
• Do not disassemble or incinerate the battery.
• Do not solder directly to the battery.
• Extreme conditions (temperature, deep cycling, overcharge/discharge) may reduce battery life.
• Do not expose the battery to high temperatures, liquids, or corrosive environments.
• Manual disassembly is prohibited.
• If the charger has not been used for over three months, recharge it in the cabinet.

CE Warning

• Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries properly.
• Connect only to USB 2.0 or higher interfaces.
• Install adapter near the equipment and ensure it is accessible.
• Operating temperature: 0°C to 50°C.
• Plug is considered the disconnect device for the adapter.

Simo Holdings Inc. declares compliance with Directive 2014/53/EU. Product is allowed in all EU member states.

Frequency Bands: EGSM900: 35dBm, DCS1800: 32dBm, WCDMA B1/B8: 25dBm, LTE Band 1/3/7/8/20/28/38/40: 25dBm, 2.4G WIFI: <20dBm.

FCC Warning

Labeling Requirements: Complies with FCC Part 15. Subject to two conditions: (1) no harmful interference, (2) must accept received interference.

Information to User: Unauthorized changes may void user authority. Equipment tested for Class B digital device limits, designed for reasonable protection against harmful interference in residential installations. If interference occurs, try measures like reorienting antenna, increasing separation, or consulting a technician.

Complies with FCC radiation exposure limits for uncontrolled environments. Install and operate with minimum 20cm distance from radiator to body.