SONOFF ZBMINI Extreme & ZBMINIL2 Zigbee Smart Switch
User Manual V1.0
Product Introduction
The SONOFF Zigbee intelligent switch (no neutral wire required) enables remote control, scheduling, and smart scene setup to trigger other devices via a Zigbee hub.
Note: Device weight is less than 1kg, and the recommended installation height is less than 2m.
LED Status Indicator
| LED Status | Status Description |
|---|---|
| Green LED slow blink | Pairing mode |
| Green LED solid on | Device is online |
| Green LED fast blink | Network error: ZBMINI Extreme and router connect normally, but the router and hub are disconnected. |
| Green LED slow blink (when powered on) | Network error: Slow blinking indicates disconnection from the parent device (e.g., Zigbee hub). |
Product Features
- Remote Control ?
- Single/Countdown Timer ⏰
- Voice Control ?
- OTA Update ☁️
- Smart Scene ?
- External Switch
- Power-on State
- Camera Connection ?
Note: These functions are determined by the connected Zigbee hub.
Installation
1. Power Off
Warning: The device should be installed and maintained by a professional electrician. To avoid the risk of electric shock, do not make any connections or touch the terminal connector when the device is powered ON!
2. Wiring Instructions
Before installation, install an air switch (circuit breaker: 10A/250V) as a safety device.
Note: For wiring methods ③ and ④, ensure correct connection and power supply to the L terminal; otherwise, the device may not operate correctly.
Switch Type Selection
The device defaults to supporting a rocker switch. To change to a push-button switch, press the device button 3 times. The green LED will blink 3 times rapidly, indicating the switch type has been successfully changed.
Important: Switch to the appropriate type before installing the device in the junction box.
Connecting with the eWeLink App
1. Download the App
Download the eWeLink app from Google Play or the App Store.
2. Pair SONOFF Zigbee Bridge with your eWeLink account
Follow the instructions within the eWeLink app to pair your Zigbee Bridge.
3. Power On
Upon first power-up, the device will enter default pairing mode, indicated by a slow blinking green LED.
Note: The device will exit pairing mode if not operated within 3 minutes. To re-enter pairing mode, press and hold the device button for 5 seconds until the green LED blinks slowly. The device will remain off and cannot be controlled by the device button or an external switch while in pairing mode.
4. Add ZBMINI Extreme to ZB Bridge
Open the eWeLink app, tap the "Add" icon on the ZB Bridge interface, and wait for the sub-devices to be searched and added.
Pairing with Amazon Echo
- Download the latest Amazon Alexa app and pair it with your Amazon Echo device that has a built-in Zigbee hub.
- Power on the ZBMINI Extreme. It will enter pairing mode by default, with the green LED blinking slowly.
- Ask Alexa Echo to discover devices by saying, "Alexa, discover my devices."
Note: If pairing fails within 3 minutes, the ZBMINI Extreme will exit pairing mode. Press and hold the button on the ZBMINI Extreme for 5 seconds to re-enter pairing mode if necessary.
Specifications
| Parameter | Value |
|---|---|
| Model | ZBMINIL2 |
| Input | 100-240V AC 50/60Hz 6A Max. |
| Output | 100-240V AC 50/60Hz 6A Max. |
| Max Load | Resistive Load: 6A Max. LED: 150W Max. @100V, 300W Max. @240V |
| Wireless Connection | Zigbee 3.0 |
| Operating Temperature | -10~40°C |
| Enclosure Material | PC V0 |
| Product Dimensions | 39.5x32x18.4mm |
Factory Reset
Restore the device to factory settings using any of the following methods (the device will automatically enter pairing mode after reset):
- Press the connected external switch 10 times consecutively.
- Press and hold the device for 5 seconds.
- Delete the sub-device in the eWeLink app.
Supported Voice Assistants
Compatible with Google Home, Alexa, and Alice.
EU Declaration of Conformity
Shenzhen Sonoff Technologies Co., Ltd. hereby declares that the radio equipment type [Intelligent Zigbee Switch Sonoff ZBMINI] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://files.innpro.pl/SONOFF
Manufacturer Address: 3F & 6F, Bldg A, No. 663, Bulong Rd, Shenzhen, Guangdong, China 5180000
Radio Frequency: 2405-2480 MHz (Zigbee)
Maximum Radio Frequency Power: 4.81 dBm (Zigbee)
[FCC logo] [CE logo]
Environmental Protection & Warranty
Environmental Protection: Used electronic equipment marked in accordance with the EU Directive must not be disposed of with municipal waste. It is subject to selective collection and recycling at designated points. By ensuring its proper disposal, you prevent potential negative consequences for the natural environment and human health. The system for collecting used equipment complies with local environmental protection regulations.
CE Marking: The product meets the requirements of the EU New Approach Directives concerning safety, health, and environmental protection, specifying hazards that should be identified and eliminated.
This document is a translation of the original user manual created by the manufacturer.
Detailed information on distributor/manufacturer warranty conditions is available at: https://serwis.innpro.pl/gwarancja
Maintenance: The product should be regularly maintained (cleaned) by the user or through specialized service points at the user's expense. In the absence of information on necessary cyclical or service maintenance actions in the user manual, regularly assess the physical condition of the product against a new product, at least once a week. If any difference is detected or noted, take immediate maintenance (cleaning) or service steps. Failure to properly maintain (clean) and react promptly upon detecting a difference may lead to permanent product damage. The warranty does not cover damage resulting from neglect.
Importer: INNPRO Robert Błędowski sp. z o.o. ul. Rudzka 65c, 44-200 Rybnik, Polska. Tel: +48 533 234 303. Email: hurt@innpro.pl. Website: www.innpro.pl
[WEEE symbol]
