sonoff.tech/usermanuals
User Manual for SONOFF models including: ZBMINIL2 Zigbee Smart Switch, ZBMINIL2, Zigbee Smart Switch, Smart Switch, Switch
ZBMINIL2 is incompliance with Directive 2014/53/EU. The full text of the EUdeclaration of conformity is available at the following internet address:.
ZBMINI-L2-DOC - SONOFF Official
31 déc. 2022 — User manual V1.0. ZBMINI Extreme ... 下载最新版Amazon Alexa App, 并配对带Zigbee⽹关的亚⻢逊⾳箱。 ... LED indicator status instruction. LED indicator status.
File Info : application/pdf, 16 Pages, 1.32MB
DocumentDocumentZBMINI Extreme
User manual V1.0
Zigbee Smart Switch
(No Neutral Required) · -----------1-6 · English----------7-12 ·Warning--------13-14
ZBMINIExtreme ZBMINIExtreme
SONOFFZigbeeZigbee /
/
OTA
1
1.
ON
OFF
ON
OFF
ON
OFF
ON
OFF
2.
,:10A/250V
L Out
S1 S2
L In
100-240V AC N
L Out
S1 S2
L In
100-240V AC
N
L Out
S2
L In
100-240V AC N
L Out
S2
L In 100-240V AC
N
2
App
1.""App
2.SONOFFZigbee 3.
""
5 ""
3
4.ZBMINIExtreme
ZB Bridge :0
>
135s
1
eWeLinkApp""
1.AmazonAlexaApp,Zigbee 2.ZBMINIExtreme""
5S
4
3
ZBMINIExtreme
ZBMINIL2 100-240VAC50/60Hz6AMax 100-240VAC50/60Hz6AMax
6AMax LED150WMax@100V,300WMax@240V
Zigbee3.0 -10~40 PCV0 39.5x32x18.4mm
5
1.10 2.5 3.eWeLinkApp
workswith Alice
6
Product introduction
English
Button LED signal indicator(Green)
Wiringports The device weight is less than 1kg, and the recommended installation height is less than 2m.
LED indicator status instruction
LED indicator status
Green LED indicator slow flashes Green LED indicator keeps on Relay is powered on
Green LED indicator quick flashes (Relay is powered on)
Green LED indicator slow flashes Relay is powered on)
Status instruction
Pairing mode
Device is on line
Abnormal network connection ZBMINI Extreme and router connect normally, but router and the hub are disconnected Abnormal network connection Slow flashing under non-pairing state: ZBMINI Extreme and the parent device are disconnected
Features
SONOFF Zigbee smart switch (No neutral required) allows you to remote control, schedule on/off and set smart scenes to trigger other devices, etc. by connecting Zigbee hub.
Remote Control
Single/Countdown Timing
Voice Control
OTA Upgrade
Smart Scene
External Switch
Power on State
Above functions are determined by the connected Zigbee Hub. 7
Camera Linking
Installation
1.Power off
ON
OFF
ON
OFF
ON
OFF
ON
OFF
English
Please install and maintain the device by a professional electrician. To avoid electric shock hazard, do not operate any connection or contact the terminal connector whilethe device is powered on!
2.Wiring instruction
Before installing the device, please install an air switch as the protective device (Air switch: 10A/250V).
L Out
S1 S2
L In
100-240V AC N
L Out
S1 S2
L In
100-240V AC
N
L Out
S2
L Out
S2
L In
100-240V AC N
L In
100-240V AC N
For the above wiring methods, please ensure the proper wiring and powering of the L in terminal, otherwise it will cause the device to work abnormally.
8
English Supported switches are rocker switch and push button and factory default by supporting rocker switch. Unsupported to use with other Inductive loads such as fan. Make sure all wires are connected correctly.
Pair with eWeLink App
1. Download the eWeLink App
2. Pair SONOFF Zigbee Bridge to your eWeLink account 3. Power on
After powering on, the device will enter the pairing mode defaulted during the first use and the green LED indicator will"flash slowly".
The device will exit the pairing mode if you do not operate it within 3mins. If you want to enter the pairing mode again, press and hold the button of the device for 5 seconds until the green Led indicator "flashes slowly" and releases. The device will remain off and cannot be controlled by the device's button or external switch when it is in pairing mode.
9
4. Add ZBMINI Extreme to the ZB Bridge
ZB Bridge Added:0
No child device,please add.
Add
>
Add Device Connecting Keep the device close enough to the hub.
135s
Looking for device 1 device Found
English
Open eWeLink App, tap "Add" icon on the ZB Bridge interface, then wait to looking for and add the sub-devices.
Pair with Amazon Echo
1. Download the latest Amazon Alexa App and pair it with Amazon Echo with built-in Zigbee hub.
2. Power on ZBMINI Extreme, then it defaulted to enter the pairing mode and the green LED indicator "flashes slowly".
Thedevicewillremainoffandcannotbecontrolledbythedevice'sbuttonorexternalswitch whenitisinpairingmode. 3. Ask the Alexa Echo to discover the devices automatically by saying"Alexa, discover my devices". If failed to pair within 3mins, ZBMINI Extreme will exit the pairing mode. Long press the button on ZBMINI Extreme for 5s to make it enter the pairing mode if you need to pair again.
10
English
Switchthedevicetothecorrespondingswitch
The device supports rocker switch by default. If you want to change the switch type, press the button 3 times and see the green Led indicator flash 3 times quickly, then the switch type is switched successfully.
Please switch to the corresponding switch type before installing the device in the mounting box.
InstalltheZBMINIExtreneinthemountingbox
Specifications
Model Input Output
Max.load
Wireless connection Working temperature Casing material Product Size
ZBMINIL2 100-240V AC 50/60Hz 6AMax 100-240V AC 50/60Hz 6AMax
Resistive load: 6A Max LED150W Max @100V, 300W Max @240V Zigbee 3.0 -10~40 PCV0 39.5x32x18.4mm
11
English
Factory reset
Return the device to its factory settings in any following ways (Device will enter the pairing mode automatically after resetting) 1. Press 10 consecutive times the connected external switch 2. Long-press the device for 5s. 3. Delete the sub-device on eWeLink App
Supported voice assistant
workswith Alice
12
FCC Warning
FCC Radiation Exposure Statement: Note:
Warning
IC Warning
This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le onjunc areil est conforme aux CNR d' l'innovation, la science et le développement économique Canada licables aux areils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
l'areil ne doit pas produire de brouillage, et; l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, onj si le brouillage est susceptible d'en compromettre le fonctionnement.
13
Warning Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Tous les changements ou modifications non expressément approuvée par le responsible de la conformité pourrait vider l'utilisateur est habilité à exploiter l'équipemen. ISEDC Radiation Exposure Statement: This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet appareil est conforme aux limitesd'exposition de rayonnement RF ISEDC établiespour un environnement non contrôlé. Cetémetteur ne doit pas être co-implanté oufonctionner en onjunction avec toute autreantenne ou transmetteur. Herby, Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type ZBMINIL2 is incompliance with Directive 2014/53/EU. The full text of the EUdeclaration of conformity is available at the following internet address: https://sonoff.tech/usermanuals
Operation frequency Range: 2405-2480MHz(Zigbee) RF Output Power: 4.81dBm(Zigbee)
14
3F & 6F, Bldg A, No. 663, Bulong Rd, Shenzhen, Guangdong, China MADE IN CHINA