PITAKA MagEZ Car Mount Pro 2 Qi2 Quick Start Guide
Installation Instructions
Step 1: Secure the Base
Connect the mount base to the base adapter and secure it by turning the stud.
Step 2: Mount to Dashboard
Snap the base into the dashboard gap.
Step 3: Firmly Secure
Rotate the cover downwards, pressing it to firmly secure the mount onto the car.
Step 4: Connect Power
Connect the charging cable to the MagEZ Car Mount Pro's USB port. Plug the other end of the cable into your car adapter, and then insert the adapter into the car's power outlet.
Step 5: Attach Device
Attach your device to the mount for wireless charging.
Technical Specifications
| Model | PB2401 |
|---|---|
| Material | Aramid fiber + PC + ABS + TPU |
| Output | 5W / 7.5W |
| Ball Joint Diameter | 17mm |
Technical Requirements
Size: 80x110mm
Material: 105g double copper paper
Safety Warnings
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device must accept any interference received, including interference that may cause undesired operation. (2) This device must be approved by the authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 1 cm from the body to ensure compliance with RF exposure requirements.
IC Warning
This device complies with Industry Canada's license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
Revision History
| Date | Version | Description | Designer | Drawing Code | Material Code | Product Name | Product Manager | Department Manager | Tolerance | Scale | Unit | Approval |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2024/03/18 | V0 | 张宪童 | MCMP2-GD-010 | 303010447 | Qi2特斯拉款包装操作指南 | ±1mm | 1:1 | mm |
