AlfaBot Window Cleaner Robot X6

Glassbot X6 User Manual

Thank you for your purchase. For any questions, please do not hesitate to contact us: we will handle all your problems as soon as possible. Your feedback is fundamental for us: we will try to do better and better. For more details, contact us via email: alfaboteu@hotmail.com (please write the seller's order number in the email subject, so that we can find the order and assist you better).

Important! - Read all documents before use

The product is not suitable for children. People with physical, sensory or mental problems or simply beginners should use the product in the presence of a supervisor or at least read the instructions first to use it safely and be aware of the risks they may incur. Children must be supervised to ensure they do not play with the robot.

The robot is for framed windows (not applicable to frameless glass/windows). The buyer must use the product safely by using it on appropriate surfaces and is responsible for any possible consequences.

Safety Information

Using an Adapter and Batteries

• Use only adapters compatible with the device. Using a different type of adapter could cause malfunctions and/or damage.
• Please use the appropriate power cord and ensure that no objects are placed on the adapter or on the power cord.
• Ensure adequate ventilation around the adapter when the device is in use. Covering the adapter with objects will reduce its cooling capacity.
• Do not use the device in very humid environments. Do not handle the device with wet hands.
• Connect the adapter to a suitable power outlet. The required voltage is indicated on the adapter.
• Do not use broken adapters, power cords, or plugs.
• Do not attempt to repair the power supply. There are no repairable parts inside. If damaged or exposed to high humidity, remove it from the power outlet. Consult the seller for help and maintenance.
• The battery used in the device presents risks of combustion or chemical reactions if used improperly. Do not disassemble it, cause short circuits, and keep it around 60℃ (140F) or it will burn.
• If you need to dispose of this product, take it to recycling centers for electronic products.
• Keep the instructions intact and safe for future use.
• Follow all steps and read the instructions.
• Do not expose the device to direct sunlight or strong light sources, and keep it away from heat sources (radiators, water heaters, stoves, etc.).
• Do not leave the device near very strong magnetic fields.
• Keep the device and accessories out of the reach of children.
• The product operates around:0℃~40℃

Risk of electric shock!

• Always ensure that the device is turned off during transport or maintenance.
• Never unplug the adapter from the socket by pulling the power cord; unplug it by gripping the adapter itself.
• Do not attempt to repair the device yourself. Repairs are only authorized at the seller's service center.
• Do not insert sharp objects into the electronic components.
• Do not change the contacts.
• Do not use the device if it or the power cord is damaged.
• Contact your local seller in case of damage.
• Do not clean the robot or the cord using liquids such as water.
• Do not use the robot in wet places or where it may come into contact with water.
• Do not use the robot in hazardous locations such as bathtubs, swimming pools, or places where flammable hazardous material is present.
• Always ensure that the power cord is not damaged, bent, or knotted.
• Do not place heavy objects on the cord. This could damage it, causing fires or electric shocks.
• If there are cables, curtains, tablecloths, or ropes in the robot's work area, always ensure that they are stored safely and in order to avoid damaging them or causing electric shocks.

ATTENTION

1. Secure the safety rope and tie it to the internal fixing hook before use.
2. Check that the rope is not broken or that the knot has not come loose before use.
3. Place the danger area sign under windows and doors without balconies.
4. The battery must be fully charged before use (green light on).
5. Do not use the robot on rainy or humid days.
6. Turn on the device before placing it on the glass.
7. Ensure that the device can attach and remain fixed to the glass surface.
8. Remove the device from the glass before turning it off.
9. Do not use on frameless windows.
10. Ensure that the cleaning ring is properly seated in the cleaning wheel to prevent leakage.
11. Do not spray or pour water on the appliance.
12. Use of the product by children is prohibited.
13. Remove any obstacles from the glass. Do not use on broken glass. Reflective or coated glass may be slightly scratched due to dirt on the glass present during cleaning.
14. Keep hair, clothing, fingers, and other body parts away from moving parts.
15. Do not use in areas with flammable products, liquids, or combustible gases.

What is a Window Cleaning Robot?

GlassBot is a window cleaning robot that works on various surfaces of glass, tiles, smooth walls, and tables. It works with an internal vacuum motor that helps it to suck in air and thus remain attached to glass surfaces. The UPS (Un-interrupted Power System) prevents the robot from falling from the window when the power goes out. With two rotating brushes that move freely on windows and walls, the GlassBot cleans surfaces efficiently thanks to intelligent AI technology that calculates the path. However, it can also operate manually for cleaning via the remote control.

Characteristics

• For glass thicker than 3 mm
• AI Technology
• Cleaning speed: 4 minutes/meter^2
• 3 types of automatic cleaning to completely clean windows
• Auto Terminate
• Equipped with UPS system (Un-interrupted Power System)
• Anti-fall control algorithm
• Automatic edge detection of the window
• Microfiber cloth
• Very strong safety rope (150 Kgf)
• Remote control

Specifications

• Adapter Input Voltage: AC110-240 V
• Dimensions: 29*14*11.5 cm
• Net weight: 0.95 KG
• Adapter Input Voltage: AC 100~240 V, 50/60 Hz
• 24 V, 80 W, 1.5 m Cable
• DC extension cable (4 meters)
• Standby Safe: Built-in lithium-ion battery, 600 mAh 14.8 V
• Charging time: 1 hour

What's in the package?

• Window cleaner robot X1
• Cleaning cloth x 14
• Remote control X1
• Adapter (100~240 VAC, 50~60 Hz) x1
• AC power cord x1
• User Manual X1
• Cleaning rings x4
• Safety rope x1

Know your GlassBot

Top View

① Red Light Flashing: Abnormal, Blue Light On: Normal, Green Light On: Charged, Pink Light On: Charging, White Light On: Power Indicator

② Buzzer

③ Hook Hole

④ Air Duct

⑤ Power Jack

⑥ Switch

⑦ Lower Red Light Flashing: Abnormal, Lower Blue Light On: Normal

Adapter/DC Extension Cable

Diagram showing adapter, DC connector, L-shaped connector, jack for inserting into DC connector, DC extension cable. Image of safety rope being secured.

Secure the safety rope.

Know your GlassBot

Remote Control

The device can be controlled from the front and back.

Please remove the insulating plastic from the back of the remote control before use. To change the battery, simply push down the battery cover.

Connecting to Power

Diagram showing how to insert the power connector and tighten the screw. Diagram showing how to turn the screw.

Power Button

• Press and hold for 2 seconds to turn on/off.
• When on, press to start/stop cleaning.

Before Use

The robot must always be connected to the power cord for normal use.

How to place the robot on the glass to start cleaning?

1. Turn it on and make sure the fan is running.
2. Place the robot on the glass about 10cm from the window frame.
3. Ensure the device can attach to the glass before letting go.

How to detach the device from the glass?

1. When the device is running, grab the safety rope with one hand and the device with the other.
2. Turn it off in a safe area.

Using and storing the safety rope

1. Before use, ensure the rope is not broken or the knot has come loose.
2. Secure the rope and tie it to the internal hook on the device before use.

UPS Function (Un-interrupted Power System)

1. The UPS function activates automatically when the power fails. This function lasts for 30 minutes.
2. If there is no auxiliary power, the device will stop by itself and the red light will flash. Remove the device from the glass as quickly as possible.
3. You can pull the device off using the safety rope. Be careful that the angle of the rope does not cause the robot to hit the window.

Ensure the battery is fully charged (green light on) before use.

1. First, turn off the device. Connect it to the power and the orange light will turn on to indicate charging.
2. The green light turns on when the battery is fully charged.

Notes

• Do not use the device on frameless windows.
• Ensure the cleaning ring is properly seated in the cleaning wheel to prevent leakage.
• Do not use on rainy or humid days.
• Place the danger area sign under windows and doors without balconies.

How to clean the glass

Step I: Use ONLY the clean and dry cloth to remove dust, dirt, and sand from the glass.

Step II: Change the cleaning cloths. Keep the cloth of the upper wheel clean and dry. Spray a very small amount of detergent (1~2 sprays) on the lower wheel, but do not soak the cloth (if it is too wet, the machine will move poorly). Then clean the glass again.

Use/Change the Cleaning Cloth

1. Place the clean and dry cloth into a clean and dry wheel.
2. Position the cleaning ring on a clean wheel and ensure that the 6 slots on the ring are securely fastened to the cleaning wheel to prevent leakage.

Diagram showing how to attach the cleaning cloth and ring to the wheel.

Frequently Asked Questions (FAQ)

Q1: The robot does not start and gives an error during the automatic test.

Answer: This means that the friction factor is not being used correctly. Please check:

• (1) If the cleaning cloth is too dirty.
• (2) Stickers on the glass, the membrane on the glass can cause friction problems.
• (3) If you clean the window too often, the surface can become very slippery.
• (4) The glass surface can become very slippery if cleaned too often with low humidity, such as in air-conditioned rooms.

Q2: The robot goes into standby and does not detect the upper window frame in “Auto Up then Down” mode.

Answer: Press the STOP button and switch to the [mode button] or [mode button] to continue cleaning.

Q3: The robot does not finish the entire window and stops in the middle.

Answer: Press the [mode button] or [mode button] to continue cleaning.

Q4: The robot goes into standby and does not move to the upper part of the window.

Answer:

• (1) Too low friction, often caused by window stickers or glass films.
• (2) The cleaning cloth is too dirty.
• (3) If you clean the window too often, the surface can become very slippery.
• (4) The glass surface can become very slippery if cleaned too often with low humidity, such as in air-conditioned rooms.
• (5) When starting (press [start button], [mode button] or [mode button]), with a 10cm distance from the frame.

Q5: The robot does not move smoothly or gets stuck.

Answer:

• (1) The cleaning cloth is too dirty. Change it.
• (2) The glass surface has a different friction factor caused by stickers, films, or other causes. Please use it in a clean area.
• (3) A screw on the cleaning wheel may have come loose; tighten it.

Q6: Circular marks remain after cleaning.

Answer: The cleaning cloth is too dirty. Change it and clean again.

Q7: What happens if the power goes out and the robot gets stuck in a high area without any auxiliary power and the red light flashes?

Answer:

• (1) You can use the safety rope. Pull it gently and pay attention to the angle of the rope to prevent the robot from hitting the window.
• (2) Turn off the robot.
• (3) Check for contact problems or broken wires.

Q8: What do I do if the robot gets stuck abnormally and the red light flashes without an alarm?

Answer: (1) Move the robot to a safe area using the remote control or simply detach the robot with the safety rope, always checking the angle of the rope to prevent it from hitting the window. (2) Turn it off. (3) Check for leaks and ensure the window is not irregular.

Q9: When I turn it on, the fan does not spin but there is no alarm.

Q10: The robot does not stop by itself after the glass is completely clean.

Answer: Press Stop and carefully remove it from the glass.

Product Warranty

1. We offer a warranty within one year from the date of purchase. The adapter and rechargeable batteries have a 6-month warranty. After the warranty expires, please purchase again. (Man-made damage is not covered by the warranty).
2. Disassembly without authorization is not covered by warranty.
3. Damage due to falling without using the safety rope is not covered by warranty.
4. The warranty system is in accordance with national regulations.

Disposal

Do not dispose of the device with normal household waste.

Dispose of the device through a registered waste disposal company or via the municipal waste disposal facility.

Note the regulations currently in force. If in doubt, consult the municipal waste disposal facility.