Instruction Manual for MICHELIN models including: ZTR-TB-ENG-180727 Michelin X Tweel ZTR Airless Radial Tire, ZTR-TB-ENG-180727, Michelin X Tweel ZTR Airless Radial Tire, Michelin X Tweel Airless Radial Tire, ZTR Airless Radial Tire, Airless Radial Tire, Airless Tire, Radial Tire, Tire
Michelin XL - X Tweel Turf Airless Radial Tire 26" x 12" N12 for Zero Turn Mowers (4 Bolt Pattern)
Technical Bulletin ZTR-TB-ENG-180727 MICHELIN® X® TWEEL® ZTR Airless Radial Tire Proper installation Instructions for zero turn mowers Star Pattern Sequence for Tightening Lug Bolts 4-Bolt Hub 5-Bolt Hub ACTION REQUIRED Inspect and verify that the MICHELIN® X® TWEEL® tire and wheel assembly is mounted properly. MICHELIN TWEEL tire and wheel assembly to machine torque specification · Ensure lug nuts with a 60° conical seat are used, and free from damage as pictured. · Tighten lug nuts to a snug "finger tight" condition (no wobble evident between the MICHELIN TWEEL tire and wheel assembly and the mounting surface). · Then torque each lug nut to the machine manufacturer's specifications in a `star pattern' sequence (see above). DO NOT EXCEED 75 lb-ft! · Lug nuts should be re-torqued after first 10 hours of use, and during every maintenance interval. Copyright © 2018 Michelin North America, Inc. All rights reserved. Incorrect mounting can lead to separation of the TWEEL from the vehicle, loss of control, serious injury or death Good Lug Nut Good Stud Worn Lug Nut Do Not Use Damaged Stud Do Not UseAcrobat Distiller 18.0 (Macintosh)