Twin Line Central Doorway Foam Station
DS-WSTN-TL
Manufacturer: FOAMit
The Good Stuff
- Secure central chemical location: Keep chemistry secure, away from the production floor; no need to refill containers, chemistry given on demand.
- No refills: One location to titrate consistent chemical.
- On schedule chemical delivery: Repeat cycle timers at each station (adjustable via traffic flow) set delays to ensure coverage.
Features
- One central pump distributes pre-mixed solution through header system.
- Pump and doorway nozzles sold separately.
- Up to 100 ft. (30.5 m) total distance between control box and nozzle(s) (Note: distance does not need to be evenly distributed).
- Powered by air and electricity.
- Repeat cycle timer.
Industries
- Food and Beverage
- Manufacturing
Specifications
- Power type: compressed air and electricity
- Chemical pickup type: supplied with pre-mixed solution from a central system solution
- Number of products unit can draw from: one product
- Flow rate: 2 gal/min (7.6 l/min)
- Timer operation type: repeat cycle
- Coverage area: ONE NOZZLE: up to 9x5 ft. (2.7x1.5 m); TWO NOZZLES: up to 8x4 ft. (2.4x1.2 m) at each nozzle; THREE NOZZLES: up to 6x3 ft. (1.8x0.9 m) at each nozzle
- Nozzle type: twin-line poly nozzle assembly (NZA-DS-TL-1)
- Number of nozzles: one control box can support up to 3 nozzle assemblies
- Distance from nozzles to control box: the combined distance between control box and nozzle(s) must equal 100 ft. (30.5 m) or less
- Tubing/fitting sizes: designed for use with 1/2 in. (12.7 mm) outside diameter tubing
Requirements
- Compressed air requirements: 40-80 psi (2.8-5.5 bar) with 5-10 CFM (141.6-283.2 l/min)
- Liquid temperature range: 40-100°F (4.4-37.8°C)
- Electrical requirements: 100-240 VAC, 50-60Hz, 1A
- Operating voltage: 24 VDC
- Central system requirements: pre-mixed solution must be supplied by a properly sized header system at 2 gpm and 40-80 psi (2.8-5.5 bar)
- Chemical compatibility: chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact FOAMit customer service department.
